Zhejiang-Lifeng - Model MDS202 - Dewatering System
MDS202 dewatering system：the sludge thickener thickens sludge with concentration of 1% or less to that with a concentration of 4 to 6%. This mechanical thickening will constantly produce stable thickened sludge, which is difficult with gravity thickening. It is possible to install as pre-thickener for your existing belt press or centrifuge to improve their dewatering performance. Furthermore, even in some facilities where the dewatered cakes are not easily transported, the volume of sludge to be disposed of can be reduced by thickening and yet it is still easily transported (pumped) as it is still in liquid form.
MDS202 Dewatering System Dewatering Principle
The dewatering body is formed by a screw axis with fixing and moving plates overlapping, as the inner diameter of screw axis is larger than the moving plate, the moving plate do the circular motion with the screw axis to prevent clogging, to ensure the continuous operation.
MDS202 Dewatering System Technical Advantage
Suitable for sludge dewatering of high/low consistency. When deal with low consistency sludge(2000mg/L), there is no need to build a thickening tank, storage pool. Reduce the cost and the release of phosphorus and Anaerobic stink.
Due to rotation of helical axis, the moving rings begin detaching from the fixed rings while continuously starting the self-cleaning process. As a result, the ubiquitous clogging is avoided. Therefore, it can handle oily sludge without any trouble while separating the water from the sludge easily. In addition, there is no need to add large quantity of flushing water and there is no odor and no secondary pollution during the dewatering process.
Fully Automatic Control
Automatically working for 24 hours, reducing the labor strength of workers.
Save Running Cost
There is no need to worry about jam up. Reduce the cleaning water consumption. The slow running speed of screw shaft reduces the power consumption and noise.
Decrease Capital Investment
The electrical cabinet, disposal tank and dehydrator are integrated, which reduces the covering area and brings convenience to installment
MDS202 Dewatering System FAQ
Question 1: dewatering machine in addition to dealing with sewage, but also to deal with other things?
MDS sludge dewatering machine is a multi-disc solid-liquid separator, most of the need for solid-liquid separation of the occasion can be applied, as long as the particles can be flocculated to more than 0.25mm particles.
Question 2: Why do you use 1.5mm of the ring piece of the dewatered section of the dewatering machine, why is it thinner than the other manufacturers?
Dehydration section of the solid density is relatively large, the activities of the ring is radial cutting mud, thin ring pieces of thin shear resistance, but with ordinary 304 stainless steel, then the strength is not enough, the general manufacturers will choose thick materials such as 3mm, we use 304 hard stainless steel, the strength is higher than the ordinary 3mm stainless steel, so taking into account the reduction of resistance and strength requirements.