Model 695pH - Industrial pH Transmitter
From Water Quality
The industrial pH transmitter is a 2-wire 4-20 mA pH transmitter enclosed in a sealed NEMA-4 enclosure. The industrial pH transmitter has an LCD screen powered by 11 to 80 VDC. The pH transmitter's span has selectable pH values from 1 to 14 pH units via an internal dip switch. The industrial pH transmitter uses BNC connections for the pH transmitter's pH probe and has tinned leads for a 3-K Balco ATC temperature probe or simulation resistor (3K resistor included). NOTE: If you will be using the industrial pH transmitter to monitor liquid with a pH close to 7pH or if your water temperature is close to 77°F the 3-K Balco ATC temperature probe will not be needed.
-
Most popular related searches
Industrial pH Transmitters Product Description
Recording
Global Water's GL500 pH Recorder adds recording capabilities to the industrial pH transmitters. The GL500 pH Recorder connects to the pH transmitter's 4-20mA output to record data. In addition, Global Water offers the PC320 pH Controller to use the industrial pH transmitter's output to control pumps or alarms.
Features
- Isolated 4-20 ma output scalable to any 1 pH unit span
- NEMA 4X Enclosure
- Large LCD Screen
- High Accuracy
- Manual/Auto Temp. Compensation
- Wide Power Supply Range
- High Input Impedance
Specification
- Industrial pH Transmitter:
- Range: 0 to 14.00 pH
- Resolution: 0.01 pH
- Accuracy: 0.02pH + 1 digit
- Span: Any 1 to 14 pH unit, selectable with internal DIP switch
- Temp compensation: Auto 32 to 212 °F (0 to 100.0 °C) or manual using fixed resistor
- Input impedance: >1012 ohms
- Output: 4 to 20 mA
- Operating temperature: -14 to 140 °F (-10 to 60 °C)
- Connector: BNC
- Power Source: 11 to 80 VDC
- Dimensions: 4.92x2.95x3.94 inch (37.9x7.5x10.0 cm) (NEMA 4X case)
Customer reviews
No reviews were found for Model 695pH - Industrial pH Transmitter. Be the first to review!