Level Mate - Model III - Level Measurement System
From Continuous Level Measurement- Hydrostatic Pressure Measurement
The AMETEK LEVEL MATE III Level System uses a stainless steel transmitter as standard. A series of perforations in the bottom of the unit protects the sensing port from either clogging or damage. The same snub-nosed end can also unscrew, allowing for easy calibration checks.
The customized LEVEL MATE III meter displays data ...
The customized LEVEL MATE III meter displays data from the transmitter, provides excitation voltage and transmits an analog signal for remote recording, alarm or control functions. It is easy to calibrate by front panel adjustments. Its programmable relay permits set and reset programming. The large, easy-to-read LED display gives local indication while the optional isolated analog output can interface with ancillary display, recording or control devices. Combined into one convenient package, the AMETEK LEVEL MATE III Level System provides you with the most versatile level measurement system on the market!
Features
- Two-year factory warranty on the system
- Intrinsically safe (Model 575S, 575P and 675)
- Solid-state silicon sensor with milliamp output
- Rugged stainless steel sensor housing – excellent environmental protection
- Excellent media compatibility
- Sensor vented to the atmosphere through the surface end of the cable
- Microprocessor-controlled meter for quick, easy setup and calibration
- Large dual line 6 digit display, 0.60” & 0.46”
- Selectable setup via front keys
- Programmable displays and function keys
- Meter can be calibrated for inches of water, feet of water, meters of water, or any desired engineering units
- Multi pump alternation control
- Options Include
- Lightning and secondary surge protectors
- 4 relay expansion module
- Meter copy programming cable
- 4-20 mA analog output from meter
- USB serial communication kit for configuring, monitoring and datalogging from a PC using DDMC MeterView software
Applications
- Complete easy-to-use system – all in one package
- Variety of reliable stainless steel sensors
- Microprocessor-controlled digital display
- Setpoints and signal outputs for remote monitoring, recording and control
- Continuous measurement and display
- Simple installation, virtually no maintenance
- Low system pricing
Specification
Ranges:
Feet of Water: 0 to 14, 0 to 35, 0 to 69, 0 to 138, 0 to 230, 0 to 345, 0 to 460, 0 to 690
Meters of Water: 0 to 4, 0 to 10, 0 to 21, 0 to 42, 0 to 70, 0 to 105, 0 to 140, 0 to 210
Transmitter Temperature Ranges:
Max. Operating:
-40° to 82°C (-40° to 180°F); media must not freeze
Compensated:
-5° to 55° C (23° to 130°F)
Temp. Effects:
Typical ±1% output change for ±25° C temp. change within compensated range when calibrated at 25°C
Accuracy:
±0.25% full scale (including linearity, hysteresis, repeatability) B.F.S.L.
Transmitter Output:
4 to 20mADC, limited to 30 mADC
Transmitter Power Supply:
24 VDC from meter
Transmitter Electrical Connection:
Attached #20 AWG polypropylene insulated and shielded conductors in a black polyurethane jacket. Unspliced lengths to 3000 ft. (1622 m)
Meter Housing Construction:
Fiberglass reinforced polyester
Transmitter Cable Color Code:
RED (+) excitation
BLACK (-) excitation,
GREEN (caseground).
Transmitter Construction:
Diaphragm: Type 316L stainless steel
Housing Type: 316 stainless steel
Nut/Washer Type: 316 stainless steel
Cable Grommet: Viton
Meter Display:
LED Display
Upper Display: 0.60” (15mm) high
Lower Display: 0.46” (12mm) high
Both displays 6 Digits (-99999 to 99999)
Meter Input Voltage:
85 to 265 VAC @ 50/60 Hz, 90-265 VDC, 20 W max
Meter Ranges:
Calibrated to transmitter range in psi, inches, feet, meters of water, or other desired engineering units -9999 to 99999.
Meter Temperature Ranges:
Operating: -40° to 65° C (-40° to 150°F)
Storage: -40° to 85°C (-40° to 185°F)
Meter Output:
Isolated 4-20 mA.
While the output is nominally 4-20 mA, the signal will accurately accommodate under and over ranges from 1 to 23 mA.
Customer reviews
No reviews were found for Level Mate - Model III - Level Measurement System. Be the first to review!