TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer
From Sulfur Compound Instruments
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing applications.
Description:
The instrument design provides minimal quenching by O2 or CO2 and less than a 0.1% response to water in the sample. Additionally, special optical filtering reduces the effects of NO interference.
All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.
The Model T100H comes with NumaView ™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView ™ Software.
Features:
- Ranges: 0-10 ppm to 0-5,000 ppm, user selectable
- Dual ranges
- Large, vivid, and durable color graphics display with touch screen interface
- Ethernet, RS-232, and (optional) USB com ports
- Front panel USB connections for peripheral devices and firmware upgrades
- 8 analog inputs (optional)
- Adaptive signal filtering optimizes response time
- Temperature & pressure compensation
- Fast response (
- Comprehensive internal data logging with programmable averaging periods
- Ability to log virtually any operating parameter
- Two-year warranty
Specifications:
- Ranges :
- Min: 0 - 10 ppm full scale
- Max: 0 - 5,000 ppm full scale (selectable with dual range supported)
- Measurement Units : ppm, mg/m3 (selectable)
- Zero Noise : 0.1 ppm (RMS)
- Span Noise : < 1% of reading (RMS) above 10 ppm
- Lower Detectable Limit : 0.2 ppm
- Zero Drift : < 1 ppm/24 hours
- Span Drift : < 0.5% of full scale/24 hours
- Lag Time : 5 seconds
- Rise/Fall Time : < 30 seconds to 95%
- Linearity : 1% of full scale
- Precision : 0.5% of reading above 10 ppm
- Sample Flow Rate : 700 cc/min ±10%
- Power Requirements : 100V-120V, 220V-240V, 50/60 Hz
- Analog Output Ranges : 10V, 5V, 1V, 0.1V (selectable)
- Recorder Offset : ±10%
- Included I/O :
- 1 x Ethernet: 10/100Base-T
- 2 x RS232 (300-115,200 baud)
- 2 x USB device ports
- 8 x opto-isolated digital outputs
- 6 x opto-isolated digital inputs
- 4 x analog outputs
- Optional I/O :
- 1 x USB com port
- 1 x RS485
- 8 x analog inputs (0-10V, 12-bit)
- 4 x digital alarm outputs
- Multidrop RS232
- 3 x 4 - 20mA current outputs
- Operating Temperature Range : 5 - 40ºC
- Dimensions (HxWxD) : 7” x 17” x 23.5” (178 x 432 x 597 mm)
- Weight:
- Analyzer: 31 lbs (16 kg)
- External pump: 15 lbs (7 kg)
Customer reviews
No reviews were found for TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer. Be the first to review!