RESOL - Model AM1 - Alarm Module
From Datalogger & VBus -Accessories
The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred. The AM1 also has a potential-free relay output, which can e. g. be connected to a building management system (BMS). Thus, a collective error message can be issued in the case of a system failure. Depending on the controller and the sensors connected, different fault conditions can be signalled, e. g. sensor failures, excess or negative system pressure as well as errors in the flow rate, such as a dry run of the pump.
-
Most popular related searches
The Alarm module AM1 ensures that occurring failur...
The Alarm module AM1 ensures that occurring failures can be immediately recognised and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.
- Reliable failure signal by LED
- Connection to a building management system (BMS) possible
- Supply and control via RESOL VBus
Technical Data
- Outputs: 1 potential-free relay
- Switching capacity: max. 30 V (DC), 1A; 125 V~ (AC), 0,5 A
- Power supply: RESOL VBus®
- Data interface: RESOL VBus®
- Housing: plastic; base part: Karilen E 42 D - H201
- Mounting: wall mounting
- Indication/Display: 1 LED
- Ambient temperature: -25 ... +70 °C
- Dimensions: 111 x 68 x 40 mm
- Protection type: IP 54
Customer reviews
No reviews were found for RESOL - Model AM1 - Alarm Module. Be the first to review!