Baler Manufacturers - Automatic & Electronic Applicator
Automatic or Electronic Manual Control option 400 or 440 litre plastic tank 3 x 12 volt Pumping System for automatic applicators, no tip changes required Star-Wheel Moisture Metering system on all automatic applicators Proximity Speed Sensors on all automatic applicators 474A Crop-Eyes standard on all automatic Large Square Applicators. Auto On/Off when no crop over pickup of baler. Touch Screen in-cab Control Box, see Control Page Calibration of Automatic Applicators is carried out by programming length and weight of bale, the applicator matches litres per tonne to moisture and bale speed changes, and will apply within 0.1 litre per tonne
-
Most popular related searches
300 Job Record Store, will record not only field r...
- 300 Job Record Store, will record not only field record, but all individual bale records, which is down loadable onto an Excel Spreadsheet. (Recorded is: Bale Identification Number/Field Name/Litres Applied/Individual Bale Weight or Total Tonnes Baled/Average Moisture/Highest Moisture/ If add the optional GPS Yield Mapping will record Latitude & Longitude
- Tagger optional: Will individually tag every bale and send all data as above to the tag through a radio frequency and with our reader that is either hand held or loader mounted will record and identify all the bale information, see Tagger Page
- From Autumn 2010 all Case, New Holland & Massey Ferguson Balers will interface with our Automatic Applicators and information can be on the baler monitor screen (must be large screen) and if the baler as a bale weigher this information will also interface into our unit recording bale wights as you bale and recording onto the tags, if you opt for a Tagger
- 1 x 12 volt pumping system for electronic applicators
- All plumbing and wiring supplied
Customer reviews
No reviews were found for Baler Manufacturers - Automatic & Electronic Applicator. Be the first to review!