Only show results available in Connecticut? Ok

air monitoring standard services

  • Premium

    HI-Q - Recalibration & Recertification Services of Air Sampling Equipments

    All HI-Q Calibrations Performed Per ANSI/NCSL Z540-1-1994. HI-Q Environmental Products Company offers a calibration and re-certification service for air flow calibrators and air sampling instrumentation. Standard protocol requires recalibrating air flow measurement devices once or twice per year depending on ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Monitoring Services Service line

  • Air Tightness Testing Service

    Air Tightness Testing - The Building Regulations. The Building Regulations 2006 Approved Document L1A came into effect in April 2006, requiring air tightness testing to be carried out in New Dwellings. Uncontrolled ventilation in dwellings through leakage paths around doors and window frames accounts for a ...

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Installation Services

    Isolate the mains before commencing installation. Securely fix the mounting bracket to the wall at the desired location. Hand dryer should be mounted vertically on solid substrate ...

    By SAVORTEX Ltd based in London, UNITED KINGDOM.

  • Construction Observation and Testing

    Frost GeoSciences offers a full array of field observation and testing services related to soils, concrete, asphalt, steel and foundations during the construction phase of a project. This aids in lessening the possibility for issues that may arise with materials, products, or procedures during construction. As required, or when project size warrants, our engineers perform field observation and ...

    By Frost GeoSciences, Inc. based in Helotes, TEXAS (USA).

  • Environment and Climate Change

    A safe and healthy environment is the common goal of several Community directives and regulations, and to this end, water, air and soil have to be regularly monitored and assessed. Measurement standards and benchmarks are indispensable components of modern measurement systems for achieving reliable, and ...

    By European Commission, Joint Research Centre (JRC) based in Brussels, BELGIUM.

  • Asbestos Air Monitoring and 4 Stage Clearance Service

    Four-stage clearance is the procedure carried out by the UKAS accredited laboratory following asbestos removal. A visual inspection must be conducted by the analyst to ensure that the area has been cleaned to a satisfactory standard and is suitable for ...

    By Environmental Scientifics Group based in Staffordshire, UNITED KINGDOM. from Environmental Safety Compliance Service line

  • BMT - Total Mercury and Norm Management Sensors

    management practices, its presence in operations can be managed pragmatically with the highest regard to safety and environmental standards. BMT was established in 1991 to provide solutions focused on protecting safety and health of people and the environment from the adverse effects of mercury and NORM waste. BMT is a ...

    By BMT Mercury Technology based in Rotterdam, NETHERLANDS.

  • Air Sampling Pump Calibration and Repair Services

    To protect safety and long-term health in environments where harmful airborne particulates, vapors, gases, and other aerosols are a factor, you need to be confident that your air sampling pump (also known as a dust monitor or nephelometer) is providing accurate air contaminant ...

    By Wilner-Greene Associates based in Yarmouth, MAINE (USA).

  • Phthalate/SVOC Analysis & Testing Services

    Special techniques are used to analyze SVOCs. Because of their low vapor pressures, SVOCs tend to condense on surfaces and only very low concentrations are measured in air. Consequently, standard environmental chamber techniques used for VOCs are unreliable for determining the emissions of SVOCs from products ...

    By Berkeley Analytical Associates, LLC based in Richmond, CALIFORNIA (USA).

  • Services

    The services provided by DIMTECH S.A. relate both to air-conditioning installation works and to the assessments and measurements of facilities and air conditioning ...

    By Dimtech S.A based in ASPROPYRGOS, GREECE.

  • Meeting Regulatory Requirement

    Meeting regulatory ...

    By Alpha MOS Environment based in TOULOUSE, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you