Only show results available in Michigan? Ok

anemometer measurement services

  • Wind Monitoring

    At the moment, if you want to erect a sizeable wind turbine, you generally have to put up a wind data mast first. This can be anything from 30m to 50m high, with anemometers on top to measure wind speeds at the height from the ground your turbine will operate at. An anemometer is a device used to measure wind speed and is a simple first step to ...

    By VG Energy based in Galston, UNITED KINGDOM.

  • Anemometer Calibration

    Calibrated anemometers are essential for accurate wind speed and power curve measurements, and each one must be individually calibrated prior to a measurement campaign. As an accredited service, DEWI offers calibration to the MEASNET standard. Wind vane testing is also advisable, and can be performed by our experts.

    By DEWI GmbH - Deutsches Windenergie Institut based in Wilhelmshaven, GERMANY. from Services for Wind Farm Stakeholders Service line

  • Anemometer Calibrations Services

    With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Wind Tunnel Centre Service line

  • Anemometer Classification Services

    At WindGuard, all measurements for classification according to IEC 61400 are possible: startup behaviour, dynamic behaviour, measurements regarding the influence of temperature and the response to inclined flow, free-field measurements, measurements of wind direction, and the influence of air density. Thanks to six calibration and research wind ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Wind Tunnel Centre Service line

  • Experimental Fluid Dynamics

    A successful process development project will need to utilize both computational and experimental methods in a complimentary manner to accelerate the development process. Experimental studies either validate process solutions developed using computational models and/or provide input data,including boundary conditions or closure equations, required ...

    By Tridiagonal Solutions Inc based in San Antonio, TEXAS (USA).

  • Anemometer Calibration

    The use of wind tunnel-calibrated anemometers is necessary in order to identify the wind resource at planned wind farm sites. Deutsche WindGuard offers anemometer and wind vane calibration and classification services using two out of four company-owned wind tunnels.

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Site Assessment Service line

  • Site Assessment Service

    Wind Measurement, Energy Yield Assessment, Wind Farm Micrositing. Reliable predictions of the energy yield of wind farms are only possible on the basis of accurate near-site wind speed measurements. The critical aspects are selection of where the tower is to be placed, selection and calibration of anemometers, the height of the met mast and the ...

    By DEWI GmbH - Deutsches Windenergie Institut based in Wilhelmshaven, GERMANY.

  • Environment & Laboratory Services

    We supply the following environmental / health & safety products for the detection and analysis of air, noise, dust, heat, gases and meteorological (weather) measurements: Sound Level Meters, Real Time Acoustic Analysers and Noise Dosimeters. Aerosol Monitor for real time dust measurement. Personal Air Sampling Pumps and Accessories for dust, ...

    By Data-Loop Ltd. based in Dorking, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you