Only show results available in Connecticut? Ok

anemometer wind services

  • Anemometer Calibration

    The use of wind tunnel-calibrated anemometers is necessary in order to identify the wind resource at planned wind farm sites. Deutsche WindGuard offers anemometer and wind vane calibration and classification services using two out of four company-owned wind tunnels.

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Site Assessment Service line

  • Meteorological Sensor Calibration Services

    In situ and in laboratory calibration services for: Anemometers (Patent Pending), Wind vanes, Air temperature, Relative humidity, Barometric pressure

    By Enviroplan Consulting based in Wayne, NEW JERSEY (USA). from Wind Energy Services Service line

  • Wind Monitoring

    At the moment, if you want to erect a sizeable wind turbine, you generally have to put up a wind data mast first. This can be anything from 30m to 50m high, with anemometers on top to measure wind speeds at the height from the ground your turbine will operate at. An anemometer is a device used to measure wind speed and is a simple first step to ...

    By VG Energy based in Galston, UNITED KINGDOM.

  • Air Velocity Calibration Services

    Air velocity calibration and anemometer calibration services are undertaken in the laboratories' universal UKAS accredited wind tunnels, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated. The facility can offer independent, UKAS accredited air velocity ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Anemometer Calibration

    Calibrated anemometers are essential for accurate wind speed and power curve measurements, and each one must be individually calibrated prior to a measurement campaign. As an accredited service, DEWI offers calibration to the MEASNET standard. Wind vane testing is also advisable, and can be performed by our experts.

    By DEWI GmbH - Deutsches Windenergie Institut based in Wilhelmshaven, GERMANY. from Services for Wind Farm Stakeholders Service line

  • Anemometer Calibrations Services

    With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Wind Tunnel Centre Service line

  • Met Mast Maintenance Services

    Wind monitoring masts that have been installed for extended periods of time are at increased risk of failing, with potentially fatal consequences. A full inspection and repair service offers you complete peace of mind.

    By Wind Measurement International based in Berkhamsted, UNITED KINGDOM. from Met Mast Service line

  • Anemometer Classification Services

    At WindGuard, all measurements for classification according to IEC 61400 are possible: startup behaviour, dynamic behaviour, measurements regarding the influence of temperature and the response to inclined flow, free-field measurements, measurements of wind direction, and the influence of air density. Thanks to six calibration and research wind ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Wind Tunnel Centre Service line

  • Anemometer Calibration Laboratory Services

    Estia Consulting & Engineering SA owns a cup anemometer calibration laboratory. The laboratory is accredited according to ISO17025:2005. It is fully equipped and performs calibrations for all types of cup anemometers. The calibrations are conducted in the closed test section wind tunnel which has been constructed by the company. The ...

    By Estia Consulting & Engineering S.A. based in Thermi- Thessaloniki, GREECE. from Wind Service line

  • Wind Measurement Services

    Independent wind measurement is indispensable for a bankable revenue forecast. The secure database of WindGuard as a DAkkS-accredited testing laboratory facilitates the wind resource assessment and protects against long-term losses. The anemometer calibration in WindGuard’s internationally recognised calibration wind tunnels ensures accurate ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Site Assessment Service line

  • Wind Tunnel Calibrations Services

    With our CSIRO designed wind tunnel situated at our Melbourne head office, we are the only NATA / ISO 17025 accredited laboratory in Australia that can calibrate all types of anemometers.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Wind Systems Laboratories

    These include:A Wind turbine testing laboratory that includes a laboratory for testing 25m wind turbine blades,A Station for Wind turbine testing,A Hybrid wind diesel systems facility,A Network of 100 stations for measuring wind characteristics

    By Center for Renewable Energy Sources based in Pikermi Attiki, GREECE.

  • Specialist Consulting Services

    Planning: Staff technical and regulatory training, Quotation and feasibility studies, Market research.Safety: Safety at the workplace, Safety at the work site, Project designing of fire-prevention systems, Classification of potentially explosive places (ATEX Directive)

    By Sinergo SPA based in Venice, ITALY.

  • Weather Monitoring - Weather Stations

    New to the range is the Vantage Vue Weather Station which belongs to the same family as the Flagship Vantage Pro weather station. This weather station is arguably the most “cost effective” professional automatic weather station available. The Vantage Vue is aimed at those who need a basic weather station to accurately record met data ...

    By Agri-tech Services (UK) Ltd based in Bedfordshire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you