ASTM Standard Services Available In Latvia
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Since 2005 D-lab is accredited for analyses of steel. The accredited analyses methods are mostly in compliance with ASTM standards, but modified for a wider content scope. We are also accreditated for Brass, Bronze, Pure Copper, Titanium alloys and Carbon in Ferro-chromium, Ferromanganese, Ferrosilicone and Carbides. For the analysis of ...
-
Showcaseby OHMSETTbased in USA
Ohmsett's unique testing venue plays an essential role in the development of new technology. We provide the perfect opportunity to evaluate new designs and prototypes, and to test the efficiency of new oil spill devices against a wide range of controlled oil spills with known characteristics. Ohmsett allows manufacturers the opportunity to learn more about their product by testing in real ...
-
Manufactured by Newage Testing Instrumentsbased in USA
Installation; Newage Testing Instruments are quoted with installation services provided by NTI Service Engineers. This will ensure that your new system will be set up, and properly commissioned to meet your ASTM standard for the intended application and have the appropriate paperwork to conform with your ISO Quality ...
-
based in USA
To avoid the logistics of flooding the geomembrane with water, the exposed geomembrane can be tested for leaks using a water puddle test. This test is used on geomembranes that are in direct contact with the supporting sub-grade or a GCL. Procedures for this method are specified in ASTM standard ...
-
Manufactured by Thermtest Inc.based in CANADA
This thermal expansion testing service covers the determination of the linear thermal expansion of rigid solid materials using push-rod dilatometers. This method is applicable over any practical temperature range where a device can be constructed to satisfy the performance requirements set forth in ASTM E-228 ...
-
based in USA
The staff members of Patriot Environmental Management are fully qualified to perform Phase I and Phase II Environmental Site Assessments (ESAs) in accordance with ASTM Standard E1527-05 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process, July 2005, which was developed to provide ...
-
Manufactured by Presto Geosystemsbased in USA
of Kansas, Colorado State University, Groupe CTT Group and the TU Clausthal University of Technology. Presto participates on ASTM standards committees to advance geocell technology. The Geosystems engineering team converts the results of these studies into smart and practical productsand empirically built models to help engineers and contractors ...
-
Manufactured by Phase Technologybased in USA
and operation inspection performed by one of our technicians. Maintaining an up-to-date calibration certificate for your Phase Technology analyzer provides necessary documentation that gives you proof of calibration for quality audits and traceability to respected ASTM standards. ...
-
Distributed by Mi-Net Technology Ltdbased in UNITED KINGDOM
Our hand abrasion lab testing service is offered in partnership with the Tribotron laboratory. Using their Tribotouch tools we are able to perform hand abrasion tests at a variety of loads, frequencies and environments for a wide range of different sample types. We can provide tests based on ASTM and ISO standards or we can design custom ...
-
Manufactured by Vatan Plastikbased in TURKEY
PE film strength and elongation are determined. Our company is testing according to ASTM D 882 test ...
-
Manufactured by Dhand Steel Tradersbased in INDIA
Just like the Brinell Hardness Test, the Rockwell Hardness test, too, implements the indentation manner of testing. The difference between the two tests lies in the higher accuracy and versatility of the Rockwell Hardness test. The ASTM E-18 standard has defined this test and it is the most common method of hardness ...
-
Distributed by Mi-Net Technology Ltdbased in UNITED KINGDOM
Our mechanical testing lab testing service is offered in partnership with the Nanovea Europe lab. Using their range of high end mechanical testers we are able to perform indentation and scratch tests on samples at extremely low nano loads up to high micro. We can provide measurements based on ASTM and ISO standards or we can design custom ...
-
based in GREECE
(frequency domain analysis) Procedure. This test is standardized by ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations. Utillissing PIT-W 2003-2 software of PILE DYNAMICS Inc and applying the appropriate filters for each pile specifications the data are procest and evaluate. ...
-
Manufactured by Chemposite Inc.based in CANADA
Our QA/QC Department ensures that all products are manufactured to your required specifications. Whether manufactured to corporate specifications, industrial or government standards (ex. ASTM, ASME RTP-1, NBS PS 15-69, BS4994, DIN, ANSI or AS), our products are backed by a 12-month warranty. We welcome third party inspections of our ...
-
based in USA
engineers can supervise the sampling, collection, and preparation of lab samples as well as manage field testing. Specimen preparation and testing are performed in compliance with the relevant ISRM (International Society for Rock Mechanics) suggested methods and/or ASTM ...
-
Manufactured by Vatan Plastikbased in TURKEY
It determines the melt flow index of the raw materials, products, semi-finished goods and granule having the polymer properties. Our firm performs our tests in accordance with ASTM D 1238 Test Standards. ...
-
based in USA
the geomembrane liner. The method has a distinct advantage because the testing is done after the final construction and after the geomembrane liner has been subjected to construction and loading activity. Procedures for this method are specified in ASTM standard ...
-
based in USA
and GIS). We have conducted over 2000 Phase I Environmental Site Assessments and Phase II Detailed Site Investigations to ASTM standards at sites in the U.S. and ...
-
by Westpak Incbased in USA
To determine the starting and sliding coefficients of friction for plastic film and sheeting, Westpak conducts the Coefficient of Friction (CoF) test per the ASTM D1894 test standard. The protocol allows five basic ways in which the test apparatus may be assembled. Westpak’s test setup incorporates a precision test sled apparatus, a ...
-
Manufactured by Permanent Steel Manufacturing Co.,Ltdbased in CHINA
range of Permanent Steel Manufacturing Co.,Ltd meets the requirements of the Unified European standards (EN) as well as BS, DIN, ASTM, JIS standards, or any other specific customer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you