Only show results in Virginia? Ok

bench-scale laboratory testing services

  • Premium

    Laboratory Services

    WesTech offers complete laboratory testing facilities to assist in your project planning. WesTech's laboratory technicians are specialists in filtration, sedimentation, and flotation. Careful testing and analysis of your sample can provide the answers to your most difficult process problems, helping to establish design parameters and size ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Laboratory & Pilot Plant Services

    Leading because of innovation ; Get to know and convince yourself from new methods of innovative approaches: Our technical team will initiate you into the secrets of pioneering process technology or developed new process steps as tailor-made special solution explicitly for your challenges. Only long-term and sustainably managed research and ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Laboratory Bench Testing

    Before a large investment is made in remediation, it may be worthwhile to conduct laboratory bench tests to assess the viability of a particular technology and quantify the parameters which will control its success.

    By Cedar Creek Engineering, Inc. based in Winchester, KENTUCKY (USA).

  • Bench Scale Testing Services

    With initial guidance from the Colorado School of Mines, Environmental Science and Engineering Division, Remington has built a unique laboratory designed to test the effectiveness of any remedial material on soil and groundwater samples collected from a prospective site.

    By Remington Technologies based in Loveland, COLORADO (USA).

  • Premium

    Technical Services

    Leading because of innovation: Get to know and convince yourself from new methods of innovative approaches: Our technical team will initiate you into the secrets of pioneering process technology or developed new process steps as tailor-made special solution explicitly for your challenges. Only long-term and sustainably managed research and ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Bench Scale Lab Testing Services

    In order to determine the efficiency of DAF in various process applications we can offer to test a water sample in our flotation laboratory as a first step. A representative sample is collected and evaluated to determine expected removal rates with our DAF technology. These results can then be used to size a full scale unit as well as a variety of ...

    By DAF Environmental, LLC based in Hinsdale, MASSACHUSETTS (USA).

  • Pilot Testing of Membrane Filtration Plants

    Pilot plant facilities with accompanying analytical laboratories are available at several GEA Filtration locations. These establish the feasibility of applying Group technology, determine optimum process conditions, and provide product samples for market analysis. The facilities in Hudson, WI are the most comprehensive of the Group with over 20 ...

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Laboratory Testing Services

    HiPOx bench test is used to determine effectiveness and efficiency of HiPOx technology to achieve the customer’s treatment objectives. Bench test is a necessary design tool. Determine appropriate dose rates of O3 and H2O2 for scale-up to field units. Correlation of results are very good and scale-up has been successful. The results of bench ...

    By APTwater LLC based in Sacramento, CALIFORNIA (USA).

  • Premium

    Innovation Center to Advance Bioprocess Development

    Coming soon! A 27 000 sq. ft. (2500 m2) bioprocess pilot-scale facility is planned to open in mid-to-late 2018 in Uppsala, Sweden. Serving as a hub for innovation in biomanufacturing, the facility will include four start-to-finish bioprocessing laboratories where researchers can test and evaluate their technical and biological discoveries while ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Laboratory Testing Services

    Axion can pre-test potential new sources of polymer feedstocks before you invest time, effort and money in full scale production trials. Our pilot-scale facility can duplicate a full scale process from raw material separation right through to injection moulding of finished polymer resin.

    By Axion Group based in Hanwell, UNITED KINGDOM. from Laboratory Testing Services Service line

  • Testing Laboratory Services

    The polyethylene products plant LLC “Planeta Plastic” has a duly certifiedtesting laboratory for testing the quality of polyethylene pipes and polyethylene film in accordance with the effective state standards of Ukraine. The laboratory at LLC “Planeta Plastic” is one of the few full-fledged laboratories operating at ...

    By Planet Plastic LLC based in Kyiv Region, UKRAINE.

  • Bench Level Testing Service

    Unlike commercial laboratories, Ursus does not provide results to satisfy a regulatory commitment, but provides data to engineers, scientists, and regulators to make sound scientific and economical decisions. Ursus generates this information by applying years of analytical testing experience with, remediation investigations, and applied treatment ...

    By Ursus Remediation Testing & Technologies, LLC based in Mount Horeb,, WISCONSIN (USA). from Bench Level Testing Service Service line

  • In Situ Chemical Oxidation (ISCO) Services

    In situ chemical oxidation (ISCO) technologies can promote rapid reduction of contaminant mass. As an industry leader in bench-scale treatability and column studies SiREM offers a range of laboratory testing services to evaluate the effectiveness of ISCO processes and to optimize remediation system design for field application.

    By SIREM based in Guelph, ONTARIO (CANADA).

  • Treatability Testing Services

    The feasibility of a proposed treatment process is normally verified through means of a laboratory bench-scale treatability study. ART Engineering has performed numerous technology evaluation, feasibility and treatability studies. The main objective of the treatability testing is to determine the technical and economical feasibility of the ...

    By ART Engineering, L.L.C. (ART) based in Land O Lakes, FLORIDA (USA).

  • Laboratory Services

    ISOTEC maintains a 'state-of-the-art' research and development (R&D) laboratory with the capability to perform custom treatability studies. Our laboratory is a EPA-registered facility and maintains the necessary regulatory agency notifications needed in compliance with RCRA for treatability testing laboratories. Our laboratory is staffed with ...

  • Tretability Laboratory

    The difference between success and failure of an application is often a direct result of understanding the site's geochemical and biological impact on a remedial technology. With this principle in mind, XDD maintains a bench-scale treatability and testing facility in New Hampshire. This facility enables XDD to quickly and cost-effectively select ...

    By XDD, LLC. based in Stratham, NEW HAMPSHIRE (USA).

  • Laboratory Scale Anaerobic Digestion (AD) Trial Testing Services

    Aqua Enviro utilise two main techniques for assessing feedstocks for anaerobic digestion (AD), with these being the Bio-chemical Methane Potential (BMP) test and laboratory scale trials using bench-scale AD reactors. We recommend Laboratory scale AD trials are used as the 2nd stage of assessment to assess the amenability of the feedstock for AD ...

    By Aqua Enviro based in Wakefield, UNITED KINGDOM. from Laboratory Scale Anaerobic Digestion (AD) Trial Testing Services Service line

  • Laboratory Scale Thermal Hydrolysis Trial Testing Services

    Aqua Enviro possess a pilot scale thermal hydrolysis rig which can be used in combination with biochemical methane potential testing or a lab scale AD trial. To assess the amenability of a potential or current AD feedstock for thermal hydrolysis treatment.

    By Aqua Enviro based in Wakefield, UNITED KINGDOM. from Laboratory Scale Thermal Hydrolysis Trial Testing Services Service line

  • Laboratory Services

    Poseidon’s laboratory services are available for testing customers’ water samples in order to determine the feasibility of the application and to simulate the expected results of full scale Poseidon equipment.

    By Poseidon Inc based in Outremont, QUEBEC (CANADA).

  • Pilot Study Services

    Filtronics “full scale” pilot units provide long term, real time field tests to collect data and document the treatability of the water source. In addition, the pilot test will verify the chemical oxidation demand, determine the chemical feed rates, electrical operating costs, and document the removal efficiencies. All tested water ...

    By Filtronics, Incorporated based in Anaheim, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you