dust filter services available in USA

  • Dust / Baghouse Filter Cleaning Services

    Ver-tech uses a strict quality control process to insure your filters are clean and serviceable. Cleaned bags and filters are inspected for proper size, holes, and general serviceability. Filters are randomly checked for air flow. Unserviceable filters are discarded or returned to the customer. Unserviceable filters are marked and segregated, if ...

    By Ver-tech Air Quality based in Rockford, MINNESOTA (USA).

  • Premium

    Filter Media Services

    Filter media is anything placed in a filter that changes the quality of water flowing through it. With the variety of media available, specific types can be chosen to create the optimum environment for your application.

    By Warden Biomedia based in Luton,, UNITED KINGDOM.

  • Dusts Abatement

    Conveyor and/or sleeves filters abatement rates, with suitable filtering surfaces, may go beyond 97%. Trap dust system, also under difficult operational conditions, removes at least 50% of the dust present in the air.

    By Labiotest Srl based in Povoletto (UD), ITALY.

  • Dust Filtration Services

    Wide variety; Airtechnic provides a wide range of dust collectors. For capacities up to 10,000 m³ per hour we offer dust collectors manufactured by MIX Srl. For larger capacities or very special applications we design dust collectors in-house. The basis of dust collectors designed by Airtechnic forms the oval shaped bag filters. The main ...

    By Airtechnic Solutions based in Tegelen, NETHERLANDS.

  • Primary (Continuous) Dusting

    A continuous flow of dust out of the exhaust of the clean air plenum is considered a primary dusting problem. Other causes of this condition are as follows: Holes in the Filter Bags or Bags Incorrectly Installed – inspect the filter bag assemblies for holes, rips, tears, or excessive wear. Make sure that the filter bags were installed ...

    By Destex Inc based in Albany, NEW YORK (USA). from Primary (Continuous) Dusting Service line

  • Secondary (Intermittent) Dusting

    Puffs of dust that are noted in the exhaust of the clean air plenum after each cleaning pulse is a secondary dusting problem. This condition is normal with new filter bags, and should stop after the first several hours of operation.

    By Destex Inc based in Albany, NEW YORK (USA). from Secondary (Intermittent) Dusting Service line

  • Analyzing Dust, Wipe, Swab, Material and Filter Samples

    Following the sampling/air-measuring activities and properly compliant transport of the samples, the dust, material, contact-plate, adhesive-film, wipe or swab samples and/or the air-sample filter carriers will be examined and analyzed in certified/accredited and specialized laboratories – in conformity with the recognized and applicable ...

    By AB-GM based in Mannheim, GERMANY.

  • Dust Filtration System Design

    - complete dust collection and filtration system design- baghouse/dust collector selection- filter cartridge selection- cyclone design- fan selection/pressure drop calculations- pulse jet specification- compressed air system design

    By Shabani Engineering based in Gastonia, NORTH CAROLINA (USA).

  • Dust Collector Monitoring/Maintenance Services

    TRIBO.series detectors are sensitive to small changes in the level of particulate flow and quickly alert plant personnel to the early onset of filter failure. Early failure detection can save users significant maintenance and operating costs when operators respond to the onset of filter problems before disastrous failures occur. Undetected leaks ...

    By Auburn Systems, LLC based in Danvers, MASSACHUSETTS (USA).

  • Filter Replacement Service

    You may think Filter Replacement is something your in-house maintenance department can handle. However with your Dust Collection System being one of your largest investments; do you really want to risk damage to your System by using unqualified workers to perform maintenance work?

    By Baghouse.com based in Las Vegas, NEVADA (USA).

  • Filter Weighings Services

    METLAB support external air testing laboratories with pre-weighted sampling filters. After sampling the filters are sent back for the final weighing resultating in a accredited weighing report that is sent to the customer. The report includes presentation of the two weighing results, the weight difference as the sampled amount of dust together ...

    By Metlab Miljö AB based in Enköping, SWEDEN. from Filter Weighings Services Service line

  • Filter Replacement Services

    With over 25 years of experience changing out filter bags, our full-time, industry trained service crews have the expertise and capabilities to perform filter changeouts on any type of dust collector or baghouse in service today. Regardless of the size of the project we can complete the work during an outage or while your plant is online and have ...

    By United Process Control, Inc. based in Hillsborough, NEW JERSEY (USA).

  • Baghouse Dust Collector Services

    It’s was very easy to work with Mac Process for baghouse services. Everything went really smoothly and we are in compliance with EPA standards. And if things start to go wrong, we’ll just call you guys to take care of it.

    By Mac Process - Schenck Process group based in Kansas City, MISSOURI (USA).

  • Filter Operation Services

    Polyethylene, a dialectric plastic exhibits the property of generating appreciable electro- static charges under the influence of an airstream. As with many other plastics, friction such as that of an airstream will cause electrostatic charges to build up on the surface of the material. Since no source of electrical energy is required to create ...

    By Pliotron Company of America LLC based in Niagara Falls, NEW YORK (USA).

  • Service For Filter Plants

    Infastaub is your partner for dedusting solutions, provides you with spare and wearing parts, offers services and measures for the modernization of your filter system. We offer professional service aimed at long-term customer satisfaction. Together with you, we develop tailor-made dust extraction concepts and support you during implementation. You ...

    By Infastaub GmbH based in Bad Homburg v.d.H., GERMANY.

  • Baghouse / Dust Collector Inspection Services

    We help you identify needs & challenges. The experienced team at NFM provide full baghouse and dust collector inspection services. Backed by 45 years of experience, we help you identify any challenges and needs. Whether your equipment needs routine, preventative, or emergency maintenance services, our experienced crews can help you.

    By National Filter Media (NFM) based in Winchester, VIRGINIA (USA).

  • Dust Removal, Milling & Impregnation Services

    The refinement of activated carbon is always required for applications associated with especially high demands, be it air pollution control or in the chemical, pharmaceutical, food and household appliance industries. Precision dust removal, milling, impregnation and water-washing or acid-washing of activated carbons are therefore established ...

    By CarboTech AC GmbH based in Essen, GERMANY.

  • Filter Change Out Services

    Change-out Service to meet your specific demands – including expedite/emergency change-out needs. NFM’s experienced crew have years of experience installing air filter solutions in virtually all types of dust collectors in all industries. We provide industrial filter change-out services to meet your specific demands – including ...

    By National Filter Media (NFM) based in Winchester, VIRGINIA (USA).

  • Cartridge Filter Cleaning Services

    Ver-tech will clean and restore your cartridge filters to like new condition. Ver-tech inspects all cartridge filters for serviceability, holes and airflow. Ver-tech offers a cartridge filter balanced inventory program. In the event one of the cartridges you send in for cleaning is unserviceable, we will provide you with a replacement cartridge at ...

    By Ver-tech Air Quality based in Rockford, MINNESOTA (USA).

  • Excessive Pressure Drop Across Filter Bags

    The differential pressure gauge or manometer on your dust collector should read 6″ w.g. or less. Higher readings and/or steadily increasing readings will result in a reduction of the main air flow through the dust collector which may produce a potential process problem such as poor suction through the evacuation control system. In extreme ...

    By Destex Inc based in Albany, NEW YORK (USA). from Excessive Pressure Drop Across Filter Bags Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you