We couldn't find any filter bag services suppliers or service providers located in Oklahoma

Here is a list of services results with suppliers serving Oklahoma

Filter Bag services available in Oklahoma

  • Short Filter Bag Life

    This is often a complicated problem to diagnose, and we recommend that you call us for advice.

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Excessive Pressure Drop Across Filter Bags

    The differential pressure gauge or manometer on your dust collector should read 6″ w.g. or less. Higher readings and/or steadily increasing readings will result in a reduction of the main air flow through the dust collector which may produce a potential process problem such as poor suction through the evacuation control system. In extreme ...

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Bag Filter Services

    B3 Systems takes the worries out of your bag filter system. We have the experience, systems, tools capabilities to integrate new capabilities and functions into your existing system or completely upgrade the entire system.

    By B3 Systems, Inc. based in Raleigh, NORTH CAROLINA (USA).

  • Performance analysis

    Fabric studies and recommendations. Reverse air system troubleshooting. Pulsing system troubleshooting. Bag abrasion correction.

    By Air Advantage, Inc. based in Panama City Beach, FLORIDA (USA). from Fabric Filters Service line

  • Bag Testing

    ETS has established a complete, independent fabric-filter laboratory dedicated to fabric, dust and new/used bag testing. The laboratory has been serving industry for over 25 years, and has conducted thousands of bag analyses both for baghouse suppliers and users. Clients have used this service for new baghouse applications, new bag quality ...

    By ETS, Inc. based in Roanoke, VIRGINIA (USA).

  • Bags & Cages Services

    Filter bag technology: At Simatek, we work with the best technology in all our offerings. We have long-standing experience in filter bag technology for sanitary applications in the food and pharma industries. This includes Cleaning in Place (CIP) process filters where we meet strict requirements in design, material certification, regulations and ...

    By Simatek A/S based in Soroe, DENMARK.

  • Flat-Bag Testing Laboratory

    The availability of a plant mainly depends on the satisfying condition of the installed flat-bags with regard to; the gas flow rate to ensure the complete gas and particle collection at the extraction point and the residual particle content in the clean gas for the observance of the requested emission limit values in continuous operation.

    By LUEHR FILTER GmbH & Co. KG based in Stadthagen, GERMANY.

  • Filter Replacement Services

    With over 25 years of experience changing out filter bags, our full-time, industry trained service crews have the expertise and capabilities to perform filter changeouts on any type of dust collector or baghouse in service today. Regardless of the size of the project we can complete the work during an outage or while your plant is online and have ...

    By United Process Control, Inc. based in Hillsborough, NEW JERSEY (USA).

  • Consulting Services for Filter Aids

    Consulting Services; On-site & Filter start-up and Filter Aid Consultants. Consulting Services; On-site & Filter start-up and Filter Aid Consultants. Filtration Equipment: Design/ Build Turnkey Systems. EVOQUA Water Technologies Filter Press – JWI Filter Press / Siemens Water. Lenser Membrane & Gasketed Plates. Pressure Leaf ...

    By American Research Technologies, LLC based in Lake Wylie, NORTH CAROLINA (USA).

  • Dust / Baghouse Filter Cleaning Services

    Ver-tech uses a strict quality control process to insure your filters are clean and serviceable. Cleaned bags and filters are inspected for proper size, holes, and general serviceability. Filters are randomly checked for air flow. Unserviceable filters are discarded or returned to the customer. Unserviceable filters are marked and segregated, if ...

    By Ver-tech Air Quality based in Rockford, MINNESOTA (USA).

  • Complete Filter Change Outs Services

    A highly experienced team of professionals can arrange and manage complete filter change outs from 10 bags to 50,000.  We have instituted safety policies and procedures that ensure we can carry out this type of work with the utmost focus on keeping people safe.

    By Advancetex International based in Queensland, AUSTRALASIA.

  • Fabric Filter & Element World Markets

    Fabric Filters (often called baghouses) are utilized to purify the air discharge from industrial stacks. The textile or membrane bags which do the filtration are periodically replaced. Applications small flows such as welding and pharmaceutical drying to large flows such as from coal fired boilers. This report identifies and quantifies ...

    By The McIlvaine Company based in Nothfield, ILLINOIS (USA). from Air Pollution Control Service line

  • Fabric Filters Services

    Air Control Techniques, P.C. provides consulting service to industrial clients to optimize the performance of a wide variety of fabric filters including pulse jet, plenum pulse, reverse air (conventional), reverse air positive pressure, and specialized high temperature units.

    By Air Control Techniques, P.C. based in Cary, NORTH CAROLINA (USA). from Air Pollution Control Services Service line

  • Primary (Continuous) Dusting

    A continuous flow of dust out of the exhaust of the clean air plenum is considered a primary dusting problem. Other causes of this condition are as follows: Holes in the Filter Bags or Bags Incorrectly Installed – inspect the filter bag assemblies for holes, rips, tears, or excessive wear. Make sure that the filter bags were installed ...

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Environmental systems for air pollution control

    Years of experience from environmental solutions for district heating and power plants Project management and engineering for Emission control, filtering of flue gases Heat recovery systems Flue gas scrubber – condensation Bag house filter

    By MAB Powertec Oy based in Lempäälä, FINLAND.

  • Fitting and Installation Services

    Fitting filters is a dirty job, ideally you need someone who is experienced at this and can work quickly and cleanly. We are experienced in the fitting of all types of filters, from filter bags & sleeves in dust extraction systems, replacing air filters in air intake systems and replacing paint filters in spray-booths. We also re-fit filter ...

    By Scottex Precision Textiles Ltd based in Bury, UNITED KINGDOM.

  • Secondary (Intermittent) Dusting

    Puffs of dust that are noted in the exhaust of the clean air plenum after each cleaning pulse is a secondary dusting problem. This condition is normal with new filter bags, and should stop after the first several hours of operation.

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • On-site Service

    FilterCare on-site services offer around the clock specialised services relating to all aspects of our GUTSCHE porotex® range. Included in the list for your company’s needs is the removal and installation of filter bags, leakage testing, pre-coating, pressure loss measurements, onsite high pressure filter bag cleaning, maintenance of the ...

    By MGF Gutsche GmbH & Co. KG based in Fulda, GERMANY.

  • Spare Parts Services

    At ITK Envifront you can find all filter cassettes, bag filters and spare parts that belong to a modern filter plant. We have drawings and documentation preserved from deliveries since the 1960s. This means that we can go back to the original document when a spare part is to be produced. We often have better documentation about the cleaning plant ...

    By ITK Envifront AB based in Växjö, SWEDEN.

  • Emissions Control for Fuel Oil Combustion

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as Bag filters, are very maintenance demanding. Indeed, diesel and fuel oil fly ash can be quite sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when ...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL. from Emission Control & Air Dedusting Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you