fouling services available in Comoros

  • Premium

    Troubleshooting Services

    Reverse Osmosis. Membrane fouling. Ion exchange. Calcium scaling. Filtration.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Biofouling Expert Service

    With our team of some of the most experienced biologists in the world having implemented hundreds of Biofouling control systems across the globe we can offer an expert review of the fouling as observed on the fouling coupons. The service is provided based on photo images of the fouling coupons of the biovision monitors and data interpretation from ...

    By H2O Biofouling Solutions B.V. based in Bemmel, NETHERLANDS.

  • Premium

    Pre-Treatment for Desalination

    For desalination plants it is of great importance of the operation of the entire plant that good pre-treatment of water takes place before the salt is removed. For reverse osmosis (RO) desalination plants, satisfactory pre-treatment is essential for avoiding membrane fouling. Membrane fouling may result in reduced water ...

    By Filtralite - Leca Norge As based in Alnabru, NORWAY.

  • Premium

    Feed Water and Pre-Treatment Tests for Laboratory Service

    In order to optimise the operation of a membrane plant it's essential to fully understand the chemical nature of the feed water. From statistical analysis of the results of membrane autopsies we've carried out over the past ten years, we have concluded that more than 50% of membrane fouling and failure events result from inadequate pre-treatment. ...

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Technical Papers Services

    Operating Experiences with a New Organic Trap Resin,Optimizing Portable Exchange DI Plants,Predicting the Operating Capacity of Strong Anion,Production of Low TOC Resins Semi conductor,Removal of More (or Less) Magazine format,Removing Organics With IX Resin,Reversible Removal,Some like it hot,Sources of TOC in Dionized Water,Superfund Site ...

    By ResinTech, Inc. based in West Berlin, NEW JERSEY (USA).

  • Product Development and Manufactuiromg

    Getting a new chemical, pharmaceutical or food product to market isn’t easy. You may have to develop a whole new process and then build specialized equipment to handle it. This can add months to your time to market. Artisan’s Product Development & Manufacturing division can help you build process equipment to handle the most viscous, fouling, ...

    By Artisan Industries, Inc. based in Stoughton, MASSACHUSETTS (USA).

  • Cooling Water Chemicals Solutions

    ChemTreat takes the time to understand the exact needs of your cooling water system before recommending a cooling water chemical program. A full system audit, which includes operational history and inefficiencies, allows your field engineer to determine the potential for corrosion, fouling and scaling within your cooling system.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA). from Cooling Water Chemicals Solutions Service line

  • On-site Customer Support Services

    AMSA, Inc. provides direct customer support and on-site visits on a shared-cost basis. We provide metabolic activity and fouling survey in industrial water systems using ATP analysis.

    By AMSA, Inc. / Antimicrobial Specialists & Associates, Inc. based in Auburn, MICHIGAN (USA).

  • Retrofits & Upgrades Services

    System upgrades to meet new emissions or process requirements. Whether you’re currently using Verantis systems and environmental control equipment or another brand, Verantis can evaluate your existing equipment and recommend upgrades that can enhance system performance or capacity. Many of our scrubbing and thermal treatment systems are ...

    By Verantis Environmental Solutions Group based in Middleburg Hts, OHIO (USA).

  • Municipal Odor Control Services

    Monroe Environmental offers a variety of odor control equipment for municipal water and wastewater treatment facilities. Monroe can design and implement an odor control system that targets and eliminates foul odors such as H2S, NH3, VOCs, groundwater contaminants, and any organic gases resulting from:

    By Monroe Environmental Corporation based in Monroe, MICHIGAN (USA). from Municipal Odor Control Services Service line

  • Fog Waste Water Solutions

    Wherever food is prepared, FOG (Fat, Oils and Grease) will be a part of the waste that you will need to somehow dispose of. Because grease and fat float on water they coagulate on the roof and walls of your drain line, while sugar and starch settle on the bottom until it becomes blocked. Foul odors become prevalent, drain flies breed, grease traps ...

    By Environmental Biotech based in Bradenton,, FLORIDA (USA).

  • Performance Monitoring

    Compressor, turbine and pump performance degrades over time due to irreversible mechanical wear and recoverable loss due to fouling and changes in operating conditions. A typical plant may lose up to 10% efficiency over several years of operation, most of which could be recovered through maintenance activities and process fine tuning. If only ...

    By Brüel & Kjær Vibro GmbH based in Darmstadt, GERMANY.

  • AIG Tuning Services

    Periodic optimization of the ammonia-to-NOx distribution is helpful for reducing operations and maintenance (O&M) costs as well as ensuring the long-term optimal performance of an SCR catalyst system. Backed by our extensive field experience on over 800 SCR systems, Cormetech provides state-of-the-art tuning and optimization services to ...

    By Cormetech, Inc. based in Durham, NORTH CAROLINA (USA).

  • Grease Interceptor Maintenance

    Beneficial microorganisms augment the natural processes already at work in grease interceptors, helping to keep the interceptors operating efficiently. Maintaining grease interceptors is a necessity for smooth kitchen operations. Grease interceptor maintenance doesn't have to be a costly,time-consuming process. Novozymes' grease interceptor ...

    By Novozymes based in Bagsvaerd, DENMARK. from Grease Interceptor Maintenance Service line

  • Antifouling Coatings Services

    If antifouling coatings are part of your fouling management strategy, nets are treated as the final part of the process, and fully dried before despatch. Net polish, to assist with abrasion, can be applied either alone or in conjunction with antifoulant.

    By W&J Knox Ltd based in Ayrshire, UNITED KINGDOM.

  • Cleaning The Membranes

    To prevent the membranes from fouling it is strongly recommended to clean the membranes periodically. The most common techniques are: Running the diffusers with the maximum overload airflow (air bumping) for a short period of time. Inject formic acid into the airflow. Flush the whole system with acid or alkaline solution. Dewater the tank and blow ...

    By Jäger Umwelt-Technik GmbH based in Hannover, GERMANY. from Cleaning The Membranes Service line

  • Cooling Water Treatment Services

    The ongoing challenge of all industrial cooling water programs is to provide chemical programs that will maintain clean heat transfer surfaces. This means providing protection against corrosion, scale and biological fouling that will ensure continuous operation of equipment with minimal downtime. Rochester Midland offers sustainable programs like ...

    By Rochester Midland Corporation (RMC) based in Rochester, NEW YORK (USA).

  • Avoiding Pump Failures for Non-Fouling Solution

    False Measurements Due to Equipment Malfunction: In Newport News, Virginia, several restaurants were built in an area serviced by the same municipal wastewater lift stations. The introduction of heavy grease content to the wastewater caused the existing level measurement equipment to foul, and fail.

    By KELLER AG für Druckmesstechnik based in Winterthur, SWITZERLAND.

  • Maintenance Services

    Many marine schemes fail because they are impractical or uneconomic to maintain. In the Triton scheme, ease of maintenance has been one of the key drivers for the whole design concept. While in its operating position, access can be gained to the electrics and control rooms at the top of the spar buoys - see opposite.

    By TidalStream Ltd. based in Southam, UNITED KINGDOM.

  • Service and Maintenance

    Annual service prolongs the life of your instruments and ensures accuracy. We recommend you send instruments in for service and maintenance every 12-18 months. This small yearly investment can have a substantial impact on the lifespan of your equipment and protects your data readings from instrument drift and fouling.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you