Only show results in Virginia? Ok

Gas Flow Calibration services

  • Air and Gas Flow Calibration Services

    Young Calibration is a leading supplier of and air and gas flow calibration services to the automotive, medical, environmetal and process instrumentation industries. Recognising the high quality performance our customers require; a continual program of expansion directs our way ahead.

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services Service line

  • Gas Flow Calibration & Test Facility

    D-Flow has access to excellent calibration facilities at Luleå University of Technology. The air calibration and test facility has a flow range from 1 to 90 000 l/h with ± 0.15% accuracy. The facility is fully automated for long-term and repeated test cycles. The air flow calibration and test facility makes it possible for us to ...

    By D-Flow Technology AB based in LuleƄ, SWEDEN.

  • Premium

    Calibration Services

    LNI Swissgas SA has an ISO 17025 accreditated Laboratory for flow measurements and has a large number of analyzers to provide a calibration certificate as well as analytical checks.

    By LNI Swissgas SA based in Versoix, SWITZERLAND.

  • Premium

    Mass Flow Controller Calibration & Repair Services

    Sierra provides accurate calibration services for mass flow meters and controllers, insertion thermal flow meters, vortex and ultrasonic flow meters. We have a wide range of NIST-traceable primary standard assets including: closed loop gas flow calibration, piston & bell provers, water flow loop, and high-temperature wind tunnel. Fast ...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flow Dynamics - Flow Meter Calibration Services

    Among the world’s elite flow calibration facilities, the Badger Meter Flow Dynamics primary and secondary standard calibration laboratories, located in Scottsdale, AZ, calibrate most flow meters from any manufacturer. The Flow Dynamics primary standard calibration facility offers superior liquid and gas calibration uncertainties, as ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA).

  • Flow Meter Calibration Services

    SmartmeasurementTM is happy to announce that we have improved our flow calibration services.  We can provide fully-accredited flow meter calibration traceable to National Institute and Technology (NIST) for our own manufactured liquid and/or gas flow meters as well as other flow manufacturers.  Periodic recalibrations are often need to ...

    By SmartMeasurement based in Wauwatosa, WISCONSIN (USA).

  • Check of Calibration/ Re-Calibration at Site / in Ulm

    In general, gas flow meter of the COMBIMASS series are not subjected to wear and tear. It can be useful under some circumstances (e.g. installation in corrosive/abrasive gas media) or if the nature of the project requires from time to time some check (e.g. CDM, high requirements on accuracy, etc), calibration of the flow sensors can be checked ...

    By Binder Group GmbH based in Ulm, GERMANY.

  • Repair & Calibration Services

    At MKS we understand that establishing a consistent regular calibration program for your gas pressure and flow instrument is critical to ensuring repeatable processes within a tool, between tools in the same facility, between tools in duplicate facilities, and when transferring processes from R&D to production. Ensuring instrument calibrations ...

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • UKAS Calibration Services

    Chell’s BS/EN/ISO/IEC 17025 accredited Calibration Laboratory provides a comprehensive service for Vacuum, pneumatic Pressure and Gas Flow measuring, controlling and generating instrumentation. Our calibration standards have been developed to provide a service having some of the lowest uncertainties in their fields, providing our customers ...

    By Chell Instruments Ltd. based in North Walsham, UNITED KINGDOM.

  • TES Instrumentation Service and Calibration

    Thomson Environmental Systems (TES) have been supplying Air Quality and Process Control Instrumentation to the Australian and New Zealand market for over 12 years. TES invest heavily in providing high quality after sales technical support and service. TES employ dedicated service technicians and design engineers giving us the ability to support a ...

    By Thomson Environmental Systems Pty Ltd. based in Caringbah, AUSTRALIA.

  • Thoron Calibration Services

    The RAD7 is able to measure both radon (222-Rn) and thoron (220-Rn) concentrations simultaneously and independently. The standard radon calibration is performed with a precision of better than 1% and we guarantee the RAD7 absolute accuracy for radon to be better than 5%. However thoron has a very short half life (about one minute) so that the ...

    By Durridge Company, Inc. based in Billerica, MASSACHUSETTS (USA).

  • Production Monitoring

    Characterising fluid movement within the well can be the key to understanding and optimising well performance; Silixa’s intelligent Distributed Acoustic (iDAS) and Distributed Temperature Sensors (ULTIMA DTS) offer a means to efficiently gather production or injection profiles along the entire wellbore with minimal or no intervention.

    By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

  • Fracture Monitoring

    Typically the optical fibre cable will be placed on the outside of the production casing on a plug and perforate completion which requires a specific installation technique and oriented perforation solution to ensure the cable is preserved throughout the completion phase and beyond. The optical fibres provide an in-situ sensor array that makes it ...

    By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

  • UKAS On Site Calibration Service

    Chell provide a convenient & viable alternative to theneed to return measuring instruments to a calibrationlaboratory. Customers can benefit from theconvenience of having calibrations performed ontheir plant, dramatically reducing downtime. Onebenefit of this approach is that instruments arecalibrated in their working environment & often ...

    By Chell Instruments Ltd. based in North Walsham, UNITED KINGDOM.

  • Instrument Calibration & Service

    How does our comprehensive service offering differ from third-party repair and service providers? At Brooks, we utilize the same metrology standards, work instructions, equipment and custom software as our manufacturing processes used to produce your instrument when it was manufactured.

    By Brooks Instrument based in Hatfield, PENNSYLVANIA (USA).

  • Wet Gas Test Rigs

    NEL announces the completion of its new upgraded wet gas test and calibration facility to simulate the higher flowrates and pressures representative of today’s deep water fields.  The wet gas rig can now achieve pressures up to 65 bar and gas flow rates over 2000 m3 per hour.

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Flow Meter Verification Services

    Flowhire offers various sizes of portable clamp-on ultrasonic flow meters available for offshore flow meter verification and instrument calibration. They are designed to provide accurate flow measurement for the oil and gas, offshore and pipeline industries. Ultrasonic flow meters use transducers to transmit and/or receive ultrasonic waves in the ...

    By Flowhire Limited based in Sowerby Bridge, UNITED KINGDOM.

  • Custom Process & Flow Measurements

    Intek is your process flow partner. With thirty years in the flow measurement business, Intek has extensive experience adapting existing designs to specific applications, or creating new designs to solve particular problems. This innovative approach has resulted in flow related patents, as well as the development of units for use in manned space ...

    By Intek, Inc. based in Westerville, OHIO (USA).

  • Precision Flow Testing Services

    GCI has developed a multi-probe flow RATA program called Precision Flow© that includes the Electronic Flow measurement portions of Methods 2H and 2G.  GCI uses four probes mounted to the stack ports that allow several readings at each point with Delta P, Temperature and Angle averaged for each reading.  This provides greater ...

    By Grace Consulting, Inc. based in Wellington, OHIO (USA). from Testing Services Service line

  • Gas Analyzer Rental Service

    PACE equipment will meet or exceed your requirements for emissions monitoring. Rest assured that all equipment is reliable as well as serviceable. All gas analyzers are tested and calibrated before shipment. Rental gas analyzers include CAI (California Analytical), JUM, Servomex, Thermo Fisher, Rosemount, Beckman, Infrared Industries, and other ...

    By PACE Environmental based in Whitehall, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you