Only show results available in Virginia? Ok

Gas Flow Meter services

  • Flow Dynamics - Flow Meter Calibration Services

    Among the world’s elite flow calibration facilities, the Badger Meter Flow Dynamics primary and secondary standard calibration laboratories, located in Scottsdale, AZ, calibrate most flow meters from any manufacturer. The Flow Dynamics primary standard calibration facility offers superior liquid and gas calibration uncertainties, as ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA).

  • Meter Selection

    Our experience means that we can advise you on the most suitable metering technology available for different applications giving you confidence in flow meter selection.

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Flow Meter Calibration Services

    SmartmeasurementTM is happy to announce that we have improved our flow calibration services.  We can provide fully-accredited flow meter calibration traceable to National Institute and Technology (NIST) for our own manufactured liquid and/or gas flow meters as well as other flow manufacturers.  Periodic recalibrations are often need to ...

    By SmartMeasurement based in Wauwatosa, WISCONSIN (USA).

  • Gas Flow Calibration & Test Facility

    D-Flow has access to excellent calibration facilities at Luleå University of Technology. The air calibration and test facility has a flow range from 1 to 90 000 l/h with ± 0.15% accuracy. The facility is fully automated for long-term and repeated test cycles. The air flow calibration and test facility makes it possible for us to ...

    By D-Flow Technology AB based in LuleƄ, SWEDEN.

  • Audit & Allocation

    Independent, reliable auditing of oil and gas metering systems is essential to ensure that best practice is followed, credibility is maintained and the chances of mis-measurement or misallocation are minimised. A flow metering audit from NEL will help you maintain best practice by ensuring that acceptable equipment, processes, procedures, ...

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Production Monitoring

    Characterising fluid movement within the well can be the key to understanding and optimising well performance; Silixa’s intelligent Distributed Acoustic (iDAS) and Distributed Temperature Sensors (ULTIMA DTS) offer a means to efficiently gather production or injection profiles along the entire wellbore with minimal or no intervention.

    By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

  • Air and Gas Flow Calibration Services

    Young Calibration is a leading supplier of and air and gas flow calibration services to the automotive, medical, environmetal and process instrumentation industries. Recognising the high quality performance our customers require; a continual program of expansion directs our way ahead.

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services Service line

  • Research & Development

    Multiphase Flow Research & Development: NEL has been at the forefront in all stages of multiphase meter development.  The multiphase flow research and development work carried out by NEL over the last two decades has played a significant role in the development of multiphase metering technology. Through extensive Joint Industry Projects ...

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Fracture Monitoring

    Typically the optical fibre cable will be placed on the outside of the production casing on a plug and perforate completion which requires a specific installation technique and oriented perforation solution to ensure the cable is preserved throughout the completion phase and beyond. The optical fibres provide an in-situ sensor array that makes it ...

    By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

  • Premium

    Spare Parts Services

    AERZEN Original Spare Parts are tailormade for our Screw Compressors, Rotary Piston Blowers and Gas Meters. Our parts guarantee a maximum of safety regarding the product and your custom designed needs.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Original Aerzen Parts Service line

  • Multiphase Test Rigs

    NEL Multiphase Flow Facility: The National Standard multiphase flow measurement facility at NEL has been fundamental to developing knowledge and capability that has allowed industry to produce and measure oil, water and gas from marginal reserves in remote and inhospitable environments.

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Wet Gas Test Rigs

    NEL announces the completion of its new upgraded wet gas test and calibration facility to simulate the higher flowrates and pressures representative of today’s deep water fields.  The wet gas rig can now achieve pressures up to 65 bar and gas flow rates over 2000 m3 per hour.

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

  • Custom Process & Flow Measurements

    Intek is your process flow partner. With thirty years in the flow measurement business, Intek has extensive experience adapting existing designs to specific applications, or creating new designs to solve particular problems. This innovative approach has resulted in flow related patents, as well as the development of units for use in manned space ...

    By Intek, Inc. based in Westerville, OHIO (USA).

  • Soil Gas Sampling

    Johnson Probing uses Direct Push Technology (DPT) to collect soil gas samples in most soil lithologies to various depths. Our 5400 series Geoprobe unit is equipped with a Vacuum System Pump and Flow Meter. We utilize the Geoprobe Post Run Tubing (PRT) System with polyethylene tubing and expendable or retractable drive points. The PRT System is the ...

    By JOHNSON Probing, LLC based in Batavia, ILLINOIS (USA).

  • Premium

    Calibration Services

    LNI Swissgas SA has an ISO 17025 accreditated Laboratory for flow measurements and has a large number of analyzers to provide a calibration certificate as well as analytical checks.

    By LNI Swissgas SA based in Chatelaine-Geneva, SWITZERLAND.

  • Gas Analysis Services

    Online analysis is an important process parameter. For your plant to operate safely, for the desulphurization process to function properly and for a high return value of the used materials, the composition of the biogas in the different fermenters and containers has to be analyzed accurately.

    By Awite Bioenergie GmbH based in Langenbach, GERMANY.

  • Automation Services - Monitoring Services for Oil and Gas Production Facilities

    Origin Industries Ltd. provides the following services to enable our clients to discover solutions, make informed decisions and predict outcomes. Automation Engineering, SCADA Engineering, Project Management, Front End Engineering & Design Studies (FEED), Communications and Network Design & Auditing, Acceptance Testing & Commissioning, ...

    By Origin Industries Ltd based in Calgary, ALBERTA (CANADA).

  • Hydraulic Analysis

    Primary Flow Signal, Inc. (PFS) employs the industry’s largest full-time staff of engineers and technical experts in differential producer type flow metering to provide hydraulic analysis for a variety of systems, including those handling oil & gas, water, wastewater, and steam.

    By Primary Flow Signal, Inc. (PFS) based in Cranston, RHODE ISLAND (USA).

  • Field Service

    The Charles P. Crowley Company is proud to support our customers with factory-trained, full-time field service technicians. Field Service capabilities are provided for California, Nevada and Arizona. Emergency, pre-selected and periodic (monthly, quarterly or annual) service agreements are available for the following types of equipment: Chemical ...

    By Charles P. Crowley Company (CPC) based in Irwindale, CALIFORNIA (USA).

  • Check of Calibration/ Re-Calibration at Site / in Ulm

    In general, gas flow meter of the COMBIMASS series are not subjected to wear and tear. It can be useful under some circumstances (e.g. installation in corrosive/abrasive gas media) or if the nature of the project requires from time to time some check (e.g. CDM, high requirements on accuracy, etc), calibration of the flow sensors can be checked ...

    By Binder Group GmbH based in Ulm, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you