Only show results available in Connecticut? Ok

gate valve services

  • Power Plant Service

    The company applied for power plant valve, gate valve, in accordance with the sealing surface configuration can be divided into wedge type gate valve and parallel sluice gate valve gate, wedge gate valve gate can be divided into: single gate type, double disc and flexible disc; Parallel slide gate valve can be divided into single ram and double ...

    By Tianjin OTS Valve Manufacturing Co.,Ltd based in Tianjin, CHINA.

  • Hydraulic Steel Structures

    Within the field of Hydraulic Steel Structures, we provide the following services: Penstocks, gates, valves, Corrosion protection, Assessment of existing HSS, Transient analyses

    By ÅF-Consult AB based in Stockholm, SWEDEN. from Energy & Environment - Hydropower Service line

  • Steam Testing Station

    We are able to test safety valves and valves with following parameters:Maximum operataing pressure PS-200 bar, Maximum operating temperature TS-650 C deg.We are able to test:safety valves up to DN250,gate valves up to DN400,but after request we can test also bigger diameters.With presence of certifying unit such as UDT, TUV, etc.

    By Chemar Armatura Sp. z o.o. based in Kielce, POLAND.

  • Fluid Catalytic Cracking (FCC) Services

    Delta Controls is an international service and repair center for refurbishment, overhaul and modification of FCC slide valves, plug valves, ball valves, gate valves and butterfly valves. Including all controls together with associated pneumatic/hydraulic/electric actuators.

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Finite Element Analysis

    industrial Penstocks Ltd approached Simpact to assist in the design of a new large diameter Knife Gate Valve for the sewage industry. Four load cases were identified for analysis to ensure the valve design provides a robust solution to warrant trouble free operation over its life span. Through the use of our CAE tools, we were able to tune the ...

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

  • Testing Services

    Our Glendale, Arizona, pump test facility, is capable of handling test flows up to 14,000 gpm (3100 m3/h) with heads up to 1664 ft. (500m) and motors up to 500 HP (370 kW). Movement and set-up of equipment is accomplished with an overhead crane with lift capabilities up to 5 tons. The flow is controlled via motorized gate valves and discharged at ...

    By National Pump Company based in Glendale, ARIZONA (USA).

  • Utility Infrastructure Services

    C.S. & W. has extensive experience successfully overcoming logistic and scheduling challenges required of complex underground utility projects. Our project teams have installed underground utilities on a wide variety of projects requiring high levels of security and expertise including mine sites, street improvements, wastewater treatment ...

    By C. S. & W. Contractors, Inc. based in Phoenix, ARIZONA (USA).

  • Vent and flare loss monitoring

    Hydrocarbon losses to a flare system, from varied sources such as pressure relief valves, ball valves, gate- and control valves, represent both an economic loss and a source of emissions.These uncontrolled product emissions burnt via the flare typically represent an important product loss. As an alternative to installing expensive flare-gas ...

    By The Sniffers based in Balen, BELGIUM. from Energy savings Service line

  • Modernising Services

    If you feel like your processes are outdated and you are looking for more functional solutions don't hesitate to contact our customer service engineers who will work together with you to find better productivity and efficiency for your operation. Modernizations of your systems and equipment are executed by us with technical support from the design ...

    By BMH Technology Oy based in Rauma, FINLAND.


    We offer supporting cages for dust collectors, made with the automatic welding machine, guaranteeing the excellent accuracy and the quality. We make cages of diameters 115 – 195 mm, made of galvanized painted and stainless wires. Maximum wires quantity: 24, length of single part: 6500 mm.Cages can be trimmed with collars, final fittings or venturi ...

    By 4industry based in POLAND.

  • Design and Fabrication Services

    Our competence and capabilities allows SBIW to design, reverse engineer and fabricate turbine of any type and auxiliary equipment components. Typical applications are replacement, refurbishment and modification of: Runner, head cover, wicket gates, thrust and guide bearings, shift rings, stationary seals, rotating seals and shaft Seals. Pelton ...

    By SBIW Inc. based in San Ramon, CALIFORNIA (USA).

  • Value Repair & Reconditioning Service

    We offer total valve management with world class capabilities to repair and recondition various size ranges for all kind of valve. This includes: Isolation Valve – Gate, Globe, Check, Plug, Ball and Butterfly valves, High Pressure Valve, Pressure Relief Valves – Conventional, Balanced Bellows, Pilot Operated, Vacuum type, Control Valve ...


  • Pipe Work

    Our stocks of pipework and fittings are both vast and varied - here are some of the options readily available from our extensive stock.

    By Pump Supplies Ltd based in The Docks, UNITED KINGDOM.

  • Engineers Services

    Mainline Backflow Products has been exciting the engineering community since 1997. MBP's unique and fresh design functions have given a new approach to an age old problem: effective sewer back-up protection with a better installation and access process. Once you maneuver though our web site you will better understand why engineers specify our ...

    By Mainline Backflow Products (Can) Inc. based in Edmonton, ALBERTA (CANADA).

  • Vortex - Engineering Services

    Engineered Solutions for handling dry bulk have always been a part of Vortex. Our Application Engineers listen to the customer’s needs and match the right valve to material characteristics and application parameters. Because the combinations are nearly endless, a commodity valve or off the shelf valve will not be enough.

    By Salina Vortex Corporation based in Salina, KANSAS (USA).

  • Age Hardening

    Bluewater’s Age Hardening which is also called Precipitation Hardening is used to increase the tensile and yield strength of materials including most alloys of aluminum, magnesium, titanium, nickel and some stainless steel.  Age Hardening creates changes in physical and mechanical properties by producing fine particles of a ...

    By Bluewater Thermal Solutions based in Greenville, SOUTH CAROLINA (USA). from Heat Treating Services Service line

  • Spare Parts Services

    Cambi offers a stock of genuine spare parts from our workshop in the UK to support clients in maintaining a high availability of their THP. Cambi offers a stock of genuine spare parts from all equipment provided as part of the Cambi scope, including but not limited to our UK workshop, to support clients in maintaining a high availability of their ...

    By Cambi Group AS based in Asker, NORWAY. from Cambi Services Service line

  • Aftermarket Services

    Whether you need replacement valve parts or a major valve repair, you can rely on Pratt. At Henry Pratt Company, we understand valves and what it takes to repair them. When repairs or replacement parts are required, the best protection you can buy for your valves is the advice of a professional product representative to help you make informed ...

  • Pumping Stations Gate Development and Maintenance Services

    Development and maintenance of pumping stations: Development and maintenance of pumping stations. Offer a product available to municipalities, dam operators and manufacturers of hydro equipment, that exceeds quality standards while remaining affordable. Our steel and stainless steel wall gates are a welded assembly. They are easy to manufacture ...

    By Carbonneau Group based in Bromont, QUEBEC (CANADA).

  • Line Valve and Actuator Repair Services

    Our highly trained technicians have an average of 15 years of experience and can repair any valve from any manufacturer, both in the shop and in the field.

    By Allied Valve Inc. based in Riverdale, IOWA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you