Only show results available in Massachusetts? Ok

hazardous air pollutant emission services

  • Premium

    Dust Collection Solutions

    Dust poses serious risks to both worker health and your entire facility. Grinding and blasting, cutting and sanding, and working with composites, metal, or stone produce a wide range of potentially hazardous dust that can compromise product quality and settle into every crook and crevice of your valuable machinery. Duroair can safeguard your ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Non-Destructive Testing Solutions

    Non-Destructive MPI and UV Testing Made Simple. Detecting metal surface flaws is no easy task, especially when you’re using magnetic particle inspections (MPIs), ultraviolet light (UV), or liquid penetrant testing to locate potentially dangerous particles not visible to the human eye. These precise, non-destructive testing procedures require ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Boiler Maximum Achievable Control Technology (MACT) Solutions

    The recently released EPA final ruling addresses hazardous air pollutant emission standards for industrial, commercial and institutional boilers and process heaters (the Boiler Maximum Achievable Control Technology or 'Boiler MACT' rule) and commercial and industrial solid waste incineration units (the 'CISWI' rule). The final Boiler MACT ruling ...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Oil Mist Collection Solutions

    Capturing Oil Mist to Improve Health, Safety, and Efficiency. Oil mist particles, bacteria, and spores generated by metal cutting, grinding, and welding can settle on every piece of equipment on the shop floor, endangering machinery and risking slips and falls. And, you don’t need OSHA to remind you of the potential skin irritations, ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Metal Cutting Solutions

    Bring Safe, Clean Air to Each Metal Cutting Task. From laser and plasma cutting to grinding and sanding, working with metals can produce a toxic cloud of oil mist, fine particulate dust, and fumes that not only threaten your machinery and electronics, but endanger your most valuable assets – your employees. There’s also the risk of ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Hazard Identification and Modeling

    Trinity has performed hundreds of health effects impact studies for actual and potential releases of hazardous air pollutants. These studies have included emissions estimations, acute toxicity evaluations for comparison to threshold limit value-based concentration limits, cancer risk assessment modeling using the GEMS database, and ambient ...

    By Trinity Consultants based in Dallas, TEXAS (USA). from Industrial Risk Management Service line

  • Carbon & Environmental Impact Reduction

    Reducing carbon emissions, greenhouse gases, and the environmental impacts industries have on our planet while creating healthy workplaces for employees will be the focus for years to come. This makes it increasingly important that companies across industries take a proactive approach to environmental and carbon impact reduction and realize how it ...

    By Dixon Environmental based in Frazer, PENNSYLVANIA (USA).

  • NESHAP and NSPS Compliance

    NESHAP-NSPSTrinity tracks the ongoing development and promulgation of New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous Air Pollutants (NESHAP). NSPS apply to equipment in nearly every facility and are one of the first areas addressed in many permitting studies. With nearly four decades of experience in air ...

    By Trinity Consultants based in Dallas, TEXAS (USA). from Compliance Assistance Service line

  • NESHAP Stage I Vapor Balancing Services

    One of the most recent regulatory requirements for UST facilities is the EPA’s National Emission Standards for Hazardous Air Pollutants, better known as NESHAP, Subpart CCCCCC. This new regulation, which is intended to help minimize the fuel vapors released from a fueling facility, requires most operators to conduct regular Stage I Vapor ...

    By Tanknology Inc. based in Austin, TEXAS (USA). from Compliance Testing Service line

  • Expert Witness Services

    With the Supreme Court’s 2005 decision in Bates v. DowAgroScience LLC, the possibility of multi-million dollar damage claims against pesticide users and manufacturers has increased. The reality of high damage claims coupled with public fears over chemicals and chemical-based products like pesticides can lead to regular and costly legal ...

    By Bergeson & Campbell, P.C. based in Washington, DISTRICT OF COLUMBIA (USA).

  • Air Quality Resources Services

    Over the past 20 years, the increased regulatory emphasis on preserving the world’s air quality resources has resulted in the need for intelligent, cost-effective solutions to a number of different air quality drivers including greenhouse gases/climate change, emissions of hazardous air pollutants (HAPs) and new/revised National Ambient Air ...

    By O’Brien & Gere based in Syracuse,, NEW YORK (USA). from Environment Service line

  • Lead Paint Remediation Services

    Often, the primary source of lead exposure in older buildings is lead-based paint. In professional, educational and industrial settings, the employees, visitors and students may become at risk for lead exposure. This exposure can occur if lead becomes airborne during construction, renovation and routine maintenance work. Those who work in ...

    By Bristol Environmental, Inc. based in Bristol, PENNSYLVANIA (USA).

  • Environmental Performance Assessment Services

    Novinda’s comprehensive source emissions expertise and operational experience provides plant operators with an essential baseline measurement, customized for their operating system, and a detailed strategy for maintaining or achieving alignment with state and federal emissions compliance regulations. Offering a meaningful gap analysis, ...

    By Novinda Corp. based in Littleton, COLORADO (USA).

  • Air Emissions Testing & Monitoring Services

    Our emissions testing professionals analyze, evaluate, and monitor process & point source emissions from thousands of operations in various industries around the world. In addition to standard USEPA Reference Method testing, Mostardi Platt professionals will work with you to develop programs tailored specifically to your air emissions testing ...

    By Mostardi Platt Associates, Inc. based in Elmhurst, ILLINOIS (USA).

  • Hazardous Air Pollutants

    Hazardous air pollutants are air pollutants that are defined by the Federal Clean Air Act as being a threat or risk of cancer or other serious adverse health affects. MDEQ implements hazardous air pollutant (HAP) regulations that include maximum achievable control technology (MACT) standards and other National Emission Standards for Hazardous Air ...

    By Mississippi Department of Environmental Quality based in Jackson, MISSISSIPPI (USA).

  • Institutional and Healthcare

    The institutional and healthcare industry comprises many subsectors including School Boards, Universities & Colleges, Ambulatory Healthcare, Hospitals and Nursing Care Facilities. Many of the activities in the institutional and healthcare industry can result in waste and pollution generation (solid, hazardous, air and water emissions). In ...

    By AET Consultants Inc. based in Kitchener, ONTARIO (CANADA).

  • Air Emissions & Stack Testing

    INTEX’s Air Testing Division (formerly Scott Environmental Technologies) is a group of scientists, engineers and technicians with stack testing experience in a wide variety of industries including pharmaceutical and chemical manufacturing, surface coatings, adhesives and industrial/commercial boilers. We assist our clients in maintaining ...

    By INTEX Environmental Group, Inc. based in Pipersville, PENNSYLVANIA (USA).

  • Asbestos Inspections and Lead-based Paint Surveys

    EWI’s Environmental Due Diligence team includes licensed and accredited lead-based paint (LBP) and asbestos-containing material (ACM) inspectors qualified to perform building surveys and associated building material sampling. These services are offered in support of various client projects that require building renovation, demolition, and ...

    By Environmental Works, Inc. based in Springfield, MONTANA (USA). from Environmental Due Diligence Service line

  • Air Service

    The Air Service Team is a group of environmental engineering professionals with over 90 years of air pollution experience. All of our Air Service Team members have wide ranging contacts with industry and regulators at all levels. As a result, we stay in the forefront of the rapidly changing air pollution regulatory field. This allows us to help ...

    By Smith Management Group (SMG) based in Lexington, KENTUCKY (USA).

  • Asbestos Removal Services

    BEI fully understands the complexities and concerns surrounding asbestos contaminated sites and structures. Our applied understanding and experience has developed into a reputation that is unmatched within the environmental remediation industry. BEI’s management team and workforce have carefully, safely and discreetly removed asbestos from ...

    By Bristol Environmental, Inc. based in Bristol, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you