Hot Gas Services
-
based in UNITED KINGDOM
A ceramic hot gas filter – designed and installed by Renewable Engineering can reduce your Particulate Emission Limit Value to below 1 mg/Nm3. The filter is installed between the boiler or combustion process and the chimney, the flow through the filter is aided either by the existing induced draft fan or we can upgrade the ...
-
Manufactured by Filtersupport ApSbased in DENMARK
Hot flue gas produced by thermal treatment, incineration and gasification, is cleaned by reducing the temperature of the flue gas. Filtersupport will be able to recommend different cooling solutions, which works by allowing the flue gas to pass through a heat exchanger system. This can be a wet solution using Quench equipment or ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
At Anguil, we merge time-tested, standard products with innovative, custom-engineered solutions. We partner with you every step of the process to design, manufacture, and install systems that reduce your environmental footprint, lower operating costs, and ultimately, maximize return on investment. With over half of Anguil’s staff consisting of degreed engineers, we are uniquely capable of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Recovery (TER). Advances in the ceramic heat recovery media now allow for 97% TER. By upgrading to the latest generation of ceramic media, systems originally supplied at 95% TER can gain an additional 2% thermal energy recovery, which equates to a 40% reduction in natural gas ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
We Don’t Walk Away. Whether your project is still on the drawing board or has been on site for years, your air and water pollution control systems represent a significant investment and long-term commitment. Anguil offers a complete selection of post-installation Aftermarket services, allowing you to get the most from your investment over the entire life of the system. ...
-
Manufactured by Brofind Spabased in ITALY
(zeolites or activated carbon) which in turn are regenerated with a hot gas, which constitutes the concentrated emission. In this way it is possible to reduce considerably the dimensions and the operating costs of the plant for final treatment or further decrease the emission values of existing ...
-
Manufactured by Rath Filtration GmbHbased in AUSTRIA
A perfect product alone is not yet the solution. Rath Filtration’s expert team offers advice in the conceptual design, planning and dimensioning of hot gas filtration systems. Because a filter element is only really effective when all system components are compatible with each ...
-
Manufactured by Caldo Consultantsbased in UNITED KINGDOM
Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; ceramic filtration can be combined with other techniques to ensure that all of the controlled substances stay within ...
-
Manufactured by Céramiques Techniques Industrielles (CTI)based in FRANCE
For the environment or for your processes CTI offers solutions for treatment of gas: World leader in the production of inorganic membranes for liquid filtration, CTI is also internationally recognised for its expertise and technological know-how in the field of hot gas filtration, with the development and production of particulate filters, ...
-
based in CANADA
We have designed a CNG decompression station using a Pressure Reduction System (“PRS”) specific for cold and hot weather mobile gas depressurization. ...
-
based in USA
With more than 20 years of experience, OMI Environmental Solutions (OMIES) has provided the industry with safe and efficient tank cleaning services. Whether for hot work (gas-free) or product change, OMIES has the ability and expertise to complete the project on time and on budget. OMIES's extensive experience covers all facets of tank ...
-
Manufactured by Enertec Kraftwerke GmbHbased in GERMANY
From the integration of a CHP module in the customer system to the turnkey heating center including gas boiler, hot water storage and control for the operation of local heating networks while fulfilling all approval requirements, the assembly is usually completed within a few days. If desired, we take over the installation, gladly ...
-
Manufactured by Precision Custom Componentsbased in USA
PCC’s welding and engineering capability supports a wide range of welding processes, testing, procedure, development, training and custom equipment. Qualified in ASME Sections III, VIII, IX, as well as AWS, Tech Pub – 248, 278, 1688 & 1689, and also NAVSEA 250-1500-1, PCC can add significant value to your fabrication needs. See more details of our many capabilities ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
As a filtration specialist the Dahlman Filter Services division is always available to give advice to its customers regarding filtration principles. The various specialists within the company are able to assist with all existing issues relating to the filtration ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
As a total and independent supplier in filtration Dahlman Filter Services offers its customers a wide range of filtration systems and filter replacement parts in which quality and service are ...
-
Manufactured by Aalborg Energie Technik a/s (AET)based in DENMARK
Reduction of NOx in Flue Gas; At the combustion of all types of fuels occur, besides the heat energy, unwanted substances which through the flue gas reach the atmosphere and thereby cause environmental pollution. One of the main pollutants is NOX. Depending on the temperature conditions in the furnace room, it is possible to reduce the ...
-
based in USA
For nearly 60 years, Stratagraph has provided complete mud logging and pressure detection services to the oil and gas industry. Having accurate, up-to-date information available helps ensure optimal operation decisions can be made while protecting the wellbore and preserving a safe working environment. Targeting the specific needs for each ...
-
Manufactured by Envirocombustion Systems Limitedbased in UNITED KINGDOM
Here at Envirocombustion Systems, we pride ourselves on being combustion and air pollution control specialists. Our focus is to provide service support and spares to all types of industrial air pollution control equipment, implementing routine service contracts that involve a detailed inspection and service of your ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you