Only show results in Massachusetts? Ok

humidity testing services

  • Temperature & Humidity Testing Services and Equipment

    We have a wide range of accelerated aging test equipment to evaluate products under simulated service conditions. Our capabilities include programmable temperature testing, a sand test/dust test, a fluid immersion test, temperature - humidity testing, non-destructive testing, and spray testing.

  • Thermal Cycling Testing

    TSG has an extensive base of environmental chambers for thermal cycling testing. Chamber sizes range from small reach-ins to large walk-in styles. Temperature ranges from -40C to +125C are featured. Thermal shock and humidity testing capabilities are also available.

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Automotive Service line

  • Climatic Testing

    Sira has the facilities and experience necessary for conducting climatic (temperature and/or humidity) testing. We are able to supply input signals and measure outputs to verify that instruments operate correctly over a range of environmental conditions. Tests can be applied to almost any type of sample, from plastic bottles to instrumentation ...

    By Sira Certification based in Dartford, UNITED KINGDOM.

  • Quality Analysis Services

    Dimensional Tolerences. Coating Adhesion, Humidity and Abrasion Testing. Transmission and Reflection from UV to the FAR-IRSpherical Centering Error. Angular Measurements. Inspection per MIL-0-13830 & MIL-C-48497. Surface RMS & Peak to Valley Measurements.

    By Spectral Systems LLC based in Hopewell Junction, NEW JERSEY (USA).

  • Constructions Materials Testing Services

    MTC delivers quality analysis and state-of-the-art reporting and delivery systems. We know you cannot afford deviations in quality and you want to avoid schedule-imposed penalties. We provide the support you need to make timely, crucial and cost-effective decisions.CWI Steel InspectionNDT ExaminationsSpecial InspectionsPrecast InspectionsFloor ...

  • Environmental Conditioning

    One of the first test processes often required prior to conducting physical testing on the package, container, or packaging component being evaluated is Environmental Conditioning; this process brings the item to be tested into equilibrium with specific temperature and humidity conditions prior to testing.

    By Westpak Inc based in San Jose, CALIFORNIA (USA). from Package Testing Service line

  • Mineral Process Development & Testing

    RPC's Process and Environmental Technology Department offers a broad range of services to the mining sector including bioleaching, hydrometallurgy and pyrometallurgy. We have a well-equipped pilot plant and extensive experience in all aspects of extractive metallurgy. Our environmental services include characterization and testing of acid ...

    By RPC (Research and Productivity Council) based in Fredericton, NEW BRUNSWICK (CANADA).

  • Burn-In & Reliability Qualification Services

    Reliability qualification demonstrates the fitness of a microelectronic product for use in the field and helps our clients better understand the fundamental wear-out mechanisms, detect design marginality combined with parameter drift and determine failure rates due to latent manufacturing defects.

    By Evans Analytical Group® (EAG) based in Sunnyvale, CALIFORNIA (USA).

  • Military Testing Services

    ATS takes pride in its commitment to military testing which has become a viable segment within our scope of capabilities. We offer a wide range of testing within one facility and strive to maintain our “one-stop-shop” reputation. Whether it is electrical testing of flight instrumentation or thermal cycling of advanced combat helmets, ...

    By Applied Technical Services Inc (ATS) based in Marietta, GEORGIA (US) (USA).

  • Environmental Testing Services

    Complementing our electrical test capabilities are a suite of dynamic and climatic test services including: vibration, mechanical shock, temp/humidity, thermal shock, altitude, salt atmosphere and combined environment testing. In addition, we offer compliance testing for DOT & NEMA enclosures and 400Hz aircraft or shipboard connectors and ...

    By Precision Test Solutions Ltd. based in Orlando, NORTH AMERICA.

  • Environmental Testing

    Environmental testing is a process of subjecting a test specimen to various temperature and humidity conditions in order to determine the effect of these conditions on the test specimen. Often, this conditioning is conducted prior to other tests such as mechanical or package performance testing in order that the test specimen be exposed to a full ...

    By Westpak Inc based in San Jose, CALIFORNIA (USA). from Cold Chain Service line

  • Resource Assessments Services

    Get a firm grip on the diurnal, seasonal and inter-year variability of your renewable energy resource. Reduce the uncertainty of your resource data set by tasking natcon7 to help you select a resource assessment system that matches your financing prerequisites and your budget. A typical natcon7 solution includes: Data acquisition system ...

    By natcon7 GmbH based in Hamburg, GERMANY.

  • Climatic Testing Services

    Why is Climatic Testing required? Technical devices and products are often exposed to climatic and mechanical stresses. They must work smoothly despite cold, heat, wetness and bad weather.

    By TÜV SÜD based in Fareham, UNITED KINGDOM. from Testing - Environmental Testing Services Service line

  • In-house Calibration Services

    Hitek calibration services offer UKAS accredited calibration services from our calibration house in West Sussex whilst we also service neighbouring counties - Kent, Hampshire, Surrey, Berkshire and Essex. Calibration of your testing equipment and test meters is the best way to ensure that your equipment is providing accurate results ...

    By Hitek Calibration Services based in Horsham, UNITED KINGDOM. from Calibration Services Service line

  • Service Seminar

    41st Annual Environmental Test Equipment Service Seminar. The service seminar is an intensive 3 day technical learning conference held every May at Hope College in Holland, Michigan. Seminar classes are tailored for environmental test equipment operators and maintenance technicians. Classes are instructed by Thermotron engineers, designers, ...

    By Thermotron Industries based in Holland, MICHIGAN (USA).

  • Reliability Testing Services

    Particle Technology Ltd houses two of the largest commercial sand and dust testing facilities in Europe. The requirements of all of the major specifications for dust penetration and erosion by sand can be met for both 'swirling' and 'driving' conditions and we have a full Ingress Protection (IP) facility, with the capability of incorporating both ...

    By Particle Technology Limited based in Hatton, UNITED KINGDOM. from Reliability Testing Service line

  • Corrosion Protection Service

    Corrosion protection has always been very important for our company and we have a lot of knowledge within our organisation. We own a large fleet of equipment (see our equipment list) and are capable of handling large-scale projects.

    By M&R Integrated Services Ltd based in Efferun Delta State, NIGERIA.

  • Customer Service

    Floralife postharvest products provide enhanced benefit when flowers are properly cared for and handled.  Floralife offers numerous types of services to ensure proper care and handling results in higher customer satisfaction and profits throughout the distribution chain.

    By Floralife based in Walterboro, SOUTH CAROLINA (USA).

  • Hazmat Conditioning Test

    Environmental conditioning is a process of subjecting a test specimen to various temperature and humidity conditions in order to determine the effect of these conditions on the test specimen. Often this conditioning is conducted prior to other tests such as mechanical or package performance testing in order that the test specimen be exposed to a ...

    By Westpak Inc based in San Jose, CALIFORNIA (USA). from Hazardous Materials Service line

  • Microbiological Air Quality Services

    Microbiological monitoring of airborne bacterial and fungal levels gives invaluable information regarding the indoor environment. Microbiological testing combined with tests for carbon dioxide, temperature and humidity give insight into the adequacy and cleanliness of fresh air supply to office areas. This includes looking at air conditioning ...

    By Cavendish Laboratories Ltd. based in Chelmsford, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you