Only show results in Virginia? Ok

hydraulic modeling services

  • Premium

    Stream Gauging Services

    GOES offers stream gauging services including site selection, data collection, calibration and rating curve development, discharge measurements. Results are used for stream gauging, velocity mapping, hydraulic modeling environmental compliance and flow studies. We have performed hundreds of Acoustic Doppler current profiles (ADCP) measurements.

    By General Oceanics Inc. based in Miami, FLORIDA (USA).

  • Premium

    Oil Cooler Testing Services

    Calorimetric testing for engine oil, transmission, hydraulic and squirt jet coolers, either water cooled or air blast models can be accommodated on all of the calorimetric wind tunnels, covering flow rates up to 100 litres per minute. Coolers can be tested on a controlled specification transmission fluid or a high performance engine motor oil or ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Oil Cooler Testing Services Service line

  • Water Resources Analysis & Engineering Services

    R2 has strong engineering expertise in hydraulic, sediment transport, and operations modeling, especially as it relates to spawning gravel quality and stability, channel restoration, and fish passage (upstream and downstream). R2's technical experts have performed a variety of hydrologic and hydraulic studies, including the design of both open ...

    By R2 Resource Consultants, Inc. based in Redmond, WASHINGTON (USA).

  • Hydraulic Modeling Services

    Hydraulic modeling is a tool used to simulate collection systems and evaluate conveyance of flow throughout a sewer network. RJN is experienced using hydraulic models to analyze sanitary, stormwater, and combined sewer systems for a wide range of scenarios, including present base flows, future flows, storm events, and post-improvement ...

    By RJN Group, Inc. based in Wheaton, ILLINOIS (USA). from Hydraulic Modeling Services Service line

  • Consulting Services

    Hydroworks has industry leading capabilities in the following areas: Computational Fluid Dynamics (CFD) as a tool for optimising turbine efficiency and cavitation performance. Mechanical design using the latest solid modelling software and Finite Element Analysis (FEA). Hydraulic transient (water-hammer) modelling, e.g. FIR reserves response and ...

    By HydroWorks Ltd. based in Christchurch, NEW ZEALAND.

  • Water and Wastewater Services

    The environmental engineers of Pare Corporation have been engaged by water suppliers, wastewater managers, and individual clients throughout New England for our expertise in potable water supply and wastewater management. PARE has remained on the cutting edge of emerging technology in the waterworks industry, including the development and ...

    By Pare Corporation based in Foxboro, MASSACHUSETTS (USA).

  • Well Planning & Engineering Services

    Scientific Drilling International (SDI) is dedicated to making the well planning efforts of our customers a success every time. One way we do that is to participate in well planning meetings where we provide suggestions and opinions based on our vast experience and knowledge. Respecting your needs and combining our directional drilling know-how ...

    By Scientific Drilling International (SDI) based in Houston, TEXAS (USA).

  • Hydrology and Water Resources Services

    Team members offer a wide scope of water resources planning and engineering services. These services include: Integrated Watershed Planning; Hydrologic & Hydraulic Modeling; Water Resources Systems Simulations; Real-time Flood Forecasting; Flood Damage Assessments; Floodplain Mapping; Shoreline Studies; Natural Channel Design.

    By Corbu Consulting Inc. based in Toronto, ONTARIO (CANADA).

  • Numerical and Conceptual Modelling

    Development of numerical models. Hydraulic modelling of surface water bodies (1D, 2D & 3D). Hydro-morphologic modelling. Precipitation-runoff modelling. Habitat modelling. Sediment transport modelling (1D, 2D).

    By Hydrophil iC based in Vienna, AUSTRIA.

  • BMP Design Services

    ERD has extensive experience and capabilities in the areas of hydraulic modeling and design for stormwater treatment systems. Personnel at ERD have studied and designed every type of stormwater treatment facility currently used in the State of Florida, including retention ponds, detention ponds, detention with filtration ponds, grassed swales, ...

    By Environmental Research and Design, Inc. (ERD) based in Orlando, FLORIDA (USA).

  • Hydraulic and Hydrologic River Modelling Services

    In hydraulic and hydrologic river modelling, numerical computation techniques are frequently used to better understand the behaviour of river systems in terms of discharge, water levels and floods. IMDC is mastering a wide range of different models to study these problems and to use these models to elaborate measures to prevent flood damages.

  • Hydraulic Analysis and Modeling

    Hydraulic models illustrate the effects of changing demand and climactic conditions on water distribution and wastewater collection systems – predicting pressures and identifying bottlenecks – and demonstrate the effectiveness of proposed solutions. By testing different alternatives and using the existing system to full advantage, ...

    By Hazen and Sawyer, P.C. based in New York, NEW YORK (USA).

  • Surface Flow Modelling Services

    Vatnaskil has a strong background in surface water hydraulics and has provided consulting services in the field for over two decades. Our specialists are trained to solve problems regarding flow in rivers, lake circulation, tidal flow and overland floods. Vatnaskil has developed Aquasea, a finite-element numerical model used to solve surface water ...

    By Vatnaskil Consulting Engineers based in 108 Reykjavik, ICELAND.

  • Pump Station Hydraulic Design Services

    NHC provides hydraulic analysis and design recommendations for operating pump station sumps and wet wells. Pump stations that operate with unsuitable approach flow hydraulics can suffer damage from cavitation, vibration, and bearing wear, and may be unable to meet design requirements. Focused analysis using physical and CFD modeling provides key ...

    By Northwest Hydraulic Consultants (NHS) based in North Vancouver, BRITISH COLUMBIA (CANADA).

  • Civil Engineering Services

    Roadway and Parking Lot Design and Investigation. Embankment Stabilization. Storm Water Analysis and Design. Erosion and Sediment Control. Third Party Review of Development Plans and PADEP Permits. NPDES MS4 Municipal Storm Water. Hydraulic Modeling - HECRAS, HEC2, Hydraflow. Hydrology Modeling - HydroCAD. PADEP General and Joint Permits. Box ...

    By Whittlemore & Haigh Engineering Inc. based in Sinking Spring, PENNSYLVANIA (USA).

  • Hydraulics Studies Services

    The design of various hydraulic structures and/or analysis of existing systems is required during various project activities. Watercom Engineering has assisted in many such aspects, including the calibration of hydraulic and hydrologic models based on flow monitoring results.

    By Watercom Engineering based in Toronto, ONTARIO (CANADA). from Hydraulics Studies Services Service line

  • Flood Management Services

    Flooding is on the rise as storms get more intense, with greater damage and more road closings on the horizon. CEI's Certified Floodplain Managers (CFMs) are here to help. Our CFMs have a working knowledge of flood studies and maps, National Flood Insurance Program rules and regulations, regulatory standards, ordinance administration, hazard ...

    By Comprehensive Environmental Inc. (CEI) based in Marlborough, MASSACHUSETTS (USA).

  • Water Engineering

    From contracts ranging in the tens of millions of dollars to that of Engineer of Record for small municipalities, Entech’s water services team treats each project as a number one priority. Overseeing the feasibility, design, and construction of water systems facilities, including associated SCADA and instrumentation systems, ...

    By Entech Engineering Inc based in Reading, PENNSYLVANIA (USA).

  • Model Construction, Calibration, Sensitivity Analysis, and Application

    Following the development of the conceptual model, the numerical model is systematically constructed, then calibration and sensitivity analyses of the relevant hydraulic parameters are performed. Once it is justified that the model satisfactorily represents the ground-water system of interest and that it is a reliable, predictive tool, it is ...

    By Nicklin Earth & Water based in Bozeman, MONTANA (USA).

  • Hydraulic Models

    Our managing director has specialist experience in the design, construction, and operation of physical hydraulic models.

    By Lymington Technical Services Ltd based in Southampton, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you