laboratory testing services in Washington

  • Laboratory Testing Service

    Shannon & Wilson operates several full-service laboratories.  Our in-house, soils and construction-materials laboratories are staffed and equipped to test soil, rock, asphalt, and concrete.  Data provided by these laboratories assist engineers during project design and help determine specification conformance during project ...

    By Shannon & Wilson, Inc. based in Seattle, WASHINGTON (USA).

  • Testing

    We have our own plastics testing laboratory for FRP and Thermoplastics. Testing is used for control of our own fabrication as well as a service to outside clients on a fee basis. We offer the following: Mechanical Testing: tensile, Flexural Strength, Flexural Modulus, Strain Gauging, Glass Contents Burnouts, Chemical Resistance Testing, Flame ...

    By Fabricated Plastics Limited Office in Bellingham, WASHINGTON (USA).

  • Ecotoxicology Laboratory

    EA’s state-of-the-art Ecotoxicology Laboratory is nationally certified and widely recognized for its depth of services and consistent quality. This laboratory provides maximum flexibility for customizing ecotoxicology testing programs to meet your needs, while assuring that all regulatory requirements are satisfied. Our aquatic culture ...

    By EA Engineering, Science and Technology, Inc Office in WASHINGTON (USA).

  • Mobile Laboratories Services

    Our advanced mobile testing laboratories are outfitted with the latest equipment and technologies, which allow us to provide a combination of real-time results for numerous pollutants as well as all the traditional “wet” testing.

    By Golden Specialty, Inc. Office in Bellingham, WASHINGTON (USA). from Mobile Laboratories Services Service line

  • eDNA Laboratory Services

    Smith-Root is exclusively partnered with Precision Biomonitoring—a spin-off from the Biodiversity Institute at the University of Guelph (home of the Barcode of Life Project)—to offer our customers laboratory analysis for their environmental DNA (eDNA) samples. While we also offer rapid, onsite qPCR results through our Biomeme platform, ...

    By Smith-Root based in Vancouver, WASHINGTON (USA).

  • Geotechnical Testing

    KEMRON maintains a materials testing laboratory for physical and geotechnical testing of a wide range of material types, including soil, sludge and sediment.  In addition to traditional materials, we test hazardous and radioactive materials such as sludges, process wastes, tarry and oily materials, and other low-solids or contaminated ...

    By KEMRON Environmental Services, Inc. Office in Vaughn, WASHINGTON (USA).

  • Sanitation Testing Service

    Test & certify your products to applicable certification and NSF/ANSI sanitation standards with CSA Group. Our international network of offices and laboratories offer you local services and guidance from experienced technical representatives who will oversee your project from start to finish.

    By CSA Group Office in Redmond, WASHINGTON (USA). from Sanitation Testing Service Service line

  • Onsite Mine and Process Support Laboratories

    ALS Mine Site design, build and operate mine and port site laboratories for mining and metallurgical process plant support. ALS Mine Site delivers the full range of ALS Minerals Division Testing capabilities (Geochemistry, Metallurgy and Inspection) with signature ALS Quality, Services and Deliverables at mine sites globally - irrespective of ...

    By ALS Environmental Office in Everett, WASHINGTON (USA). from Onsite Mine and Process Support Laboratories Service line

  • Radioactive Sealed Source Leak Testing Services

    Dade Moeller’s Radioanalytical Laboratory provides Leak Test Kits at no charge to clients for the performance of required Radioactive Sealed Source Leak Testing. Radioactive Sealed Source Leak Tests should be conducted at the frequency specified in the source’s respective Sealed Source Device (SSD) Registration Certificate. Not all ...

    By Dade Moeller & Associates, Inc. based in Richland, WASHINGTON (USA). from Radioactive Sealed Source Leak Testing Services Service line

  • Electronics Services

    At ALS Electronics our laboratories have the resources to deliver reliable and timely analytical solutions for all of your electronics testing needs. We specialize in micro-contaminant and RoHS analysis, offering tailored analytical packages that are specific to client requirements and needs. Our laboratories are staffed with technical and ...

    By ALS Environmental Office in Everett, WASHINGTON (USA). from Electronics Services Service line

  • Bottled Water Service

    Bottlers around the world have turned to Edge Analytical Laboratories for certified laboratory work. Our long-standing involvement in the industry gives you peace of mind. All bottlers are required by the FDA (Code of Federal Regulations (CFR) parts 129, 165) to test their finished products and source waters annually. Municipal sources are exempt.

    By Edge Analytical based in Burlington, WASHINGTON (USA).

  • IECEx Certification Services

    CSA Group’s highly trained technical experts will work with you to help obtain the approvals you need under the International Electrotechnical Commission Explosive Scheme (IECEx) for electrical equipment used in hazardous locations around the world. As a recognized IECEx Body and Testing Laboratory, we can help you streamline the process by ...

    By CSA Group Office in Redmond, WASHINGTON (USA). from IECEx Certification Services Service line

  • Solid Waste Services

    Assessment of process waste (residues), treatment and disposition alternatives. Evaluation of opportunities to recycle/reuse or minimize waste generation. Preparation of laboratory/bench test protocols. Solid waste residue treatment system design to meet disposal requirements. Solid waste permit preparation support. Waste waste residue generation ...

    By Process Engineering Associates, LLC Office in Richland, WASHINGTON (USA). from Solid Waste Services Service line

  • Method Development

    Nautilus offers a rare combination of experience and depth in the development and validation of test methods. Few other consulting firms can demonstrate similar qualifications through publications in the peer-reviewed literature, as well as participation in technical advisory committees and inter-laboratory validations. Thus, Nautilus is in a ...

    By Nautilus Environmental Office in Tacoma, WASHINGTON (USA). from Method Development Service line

  • Environmental Services

    At ALS Environmental, we provide a full range of environmental analytical testing services, specializing in the analysis of soil, sediment, water (raw, waste, drinking, catchment, recycled, saline, product), leachates, dust, air (indoor, stack, ambient), gas, biota, industrial hygiene, and radiochemistry. Analytical laboratory testing services for ...

    By ALS Environmental Office in Everett, WASHINGTON (USA). from Environmental Services Service line

  • Water & Wastewater and Groundwater Services

    Assessment of process inputs/feeds. Assessment/inventory of recycle/reuse and substitution opportunities. Evaluate process modifications to enhance performance. Regulatory assessment to summarize current and future requirements. Process Water or Wastewater treatment system design. Groundwater treatment system design. Wastewater permit preparation ...

    By Process Engineering Associates, LLC Office in Richland, WASHINGTON (USA). from Water & Wastewater and Groundwater Services Service line

  • Treatability Studies and Technology Evaluation

    KEMRON’s Treatability Laboratory evaluates processes for the treatment of hazardous and low-level radioactive wastes. Our research and development personnel draw upon direct experience with full-scale treatment processes to ensure that laboratory conditions accurately simulate full-scale operating conditions. As an independent treatability ...

    By KEMRON Environmental Services, Inc. Office in Vaughn, WASHINGTON (USA).

  • Soils - Biosolids Service

    Engineers, Waste Disposal Operators, Contractors, and Agriculturists use Edge Analytical Laboratories when testing their soil, Soils: Microorganisms, Metals, Herbicides, Pesticides, Physical Properties, TPH, Biosolids: Send us your sludge and biosolids samples for analysis. Our program includes the full 503 rule, inorganics, organics, micro, and ...

    By Edge Analytical based in Burlington, WASHINGTON (USA).

  • Geotechnical and Geological Services

    Shannon & Wilson was founded in 1954 as a geotechnical engineering firm. We offer a complete staff of pro­fessional geotechnical engineers, geologists, technicians, and support personnel. We are adept at developing project scope and planning exploration programs, directing field drilling and sampling operations, completing laboratory ...

    By Shannon & Wilson, Inc. based in Seattle, WASHINGTON (USA).

  • Metallurgy Services

    ALS Metallurgy is the market leader in bankable metallurgical testwork services for mineral process flowsheet development and optimisation. The group combines the expertise of world renowned Metallurgical testwork experts – Ammtec and G&T Metallurgical. ALS Metallurgy offers extensive bench scale, large scale pilot plant facilities and ...

    By ALS Environmental Office in Everett, WASHINGTON (USA). from Metallurgy Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you