material testing services in Virginia

  • Construction Materials Testing Services

    Construction Materials Testing (CMT) describes several different types of services, but it primarily involves testing structural materials used to build a new project from the ground up, materials and components used to construct a new addition, or new components being added to an existing facility. These include earthwork, shallow and deep ...

    By ECS Corporate Services, LLC based in Chantilly, VIRGINIA (USA). from Construction Materials Testing Services Service line

  • Materials & Forensics Testing

    SanAir provides a full range of Transmission and Scanning Electron Microscopy services with fast response time for your required needs. SanAir's facility includes the finest electron optics and preparation equipment providing you with the highest quality. Only the most recent and accepted protocols are followed, insuring you of up-to-date results. ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Food Microbiology

    The staff at Aerobiology can provide analytical testing for your raw materials and finished food products. We offer testing for a broad range of food pathogens, such as Salmonella, E. coli, Staphylococcus aureus and Listeria. In addition to evaluating the microbial bioburden we offer product performance tests such as shelf life studies, aW (water ...

    By Aerobiology Laboratory Associates, Inc. based in Dulles, VIRGINIA (USA).

  • Geotechnical Testing

    KEMRON maintains a materials testing laboratory for physical and geotechnical testing of a wide range of material types, including soil, sludge and sediment.  In addition to traditional materials, we test hazardous and radioactive materials such as sludges, process wastes, tarry and oily materials, and other low-solids or contaminated ...

    By KEMRON Environmental Services, Inc. based in Vienna, VIRGINIA (USA).

  • Mold Testing

    Mold testing protocol, media selection and laboratory analysis utilized are project dependant. Mold testing involving air samples, bulk materials analysis, culturette swab, tape lift, vacuum and inner-wall mold testing may be submitted for non-viable or viable mold analysis. Mold tests collected during your mold inspection are submitted to an ...

    By ENView Inspections Protocols & Solutions based in Fairfax, VIRGINIA (USA).

  • Product Testing And Validation

    Aerobiology Laboratory provides Product Testing and Validation for your finished or raw product in accordance with ASTM, JIS, AATCC, USP, AOAC and EPA methods. Testing methods provide information on performance, antimicrobial activity, growth properties , and product effectiveness. The staff at Aerobiology is experienced in developing protocol ...

    By Aerobiology Laboratory Associates, Inc. based in Dulles, VIRGINIA (USA).

  • Laboratory Testing Services

    Our in-house laboratories measure the physical properties and engineering behavior of soil, rock, and building construction materials. This capability allows our professional staff to develop timely and reliable information supporting project design and construction.

    By Schnabel Engineering, Inc. based in Glen Allen, VIRGINIA (USA). from Laboratory Testing Services Service line

  • Asbestos Testing Services

    Asbestos under a microscopeSanAir is a full-service laboratory offering asbestos analysis in Phase Contrast Microscopy (PCM), Polarized Light Microscopy (PLM), and Transmission Electron Microscopy (TEM). Our state-of-the-art Asbestos Laboratory provides quality analytical results with rapid turn around times within three hours. Our polarized light ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Code Compliance Consulting Services

    ECS has served the greater metropolitan Washington, DC area for more than 25 years providing geotechnical engineering, environmental consulting, construction materials testing and observations, and facilities engineering services.  ECS is a certified Third Party Plan Review Agency for the District of Columbia Department of Consumer and ...

    By ECS Corporate Services, LLC based in Chantilly, VIRGINIA (USA). from Code Compliance Consulting Services Service line

  • Plan Review Services

    ECS has served the metropolitan Washington, DC area for more than 25 years providing geotechnical engineering, environmental consulting, construction materials testing and observations, facilities engineering services, and more recently code compliance consulting services. ECS is approved to provide Third Party Plan Review services for the ...

    By ECS Corporate Services, LLC based in Chantilly, VIRGINIA (USA). from Plan Review Services Service line

  • Third Party Inspection Services

    ECS has served the greater metropolitan Washington, DC area for more than 25 years providing geotechnical engineering, environmental consulting, construction materials testing and observations, and facilities engineering services. ECS provides both Special Inspections (i.e., IBC Chapter 17) and Third Party Inspections (MEP, Fire, Architectural) as ...

    By ECS Corporate Services, LLC based in Chantilly, VIRGINIA (USA). from Third Party Inspection Services Service line

  • Asbestos Analysis: EPA 1000 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 1000 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Fairfax, VIRGINIA (USA). from Asbestos Analysis: EPA 1000 Point Count Service line

  • Asbestos Analysis: EPA 200 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 200 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Fairfax, VIRGINIA (USA). from Asbestos Analysis: EPA 200 Point Count Service line

  • Asbestos Analysis: EPA 400 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 400 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Fairfax, VIRGINIA (USA). from Asbestos Analysis: EPA 400 Point Count Service line

  • Microbiology Identification Services

    SanAir operates a state-of-the-art microbiological analysis laboratory, based outside of Richmond, Virginia. This facility is equipped to analyze viable and non-viable air, bulk, and direct surface samples. We offer a complete line of analytical methods and lab testing for the determination of mold and bacteria from bioaerosol, surface, and bulk ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Asbestos Analysis

    Aerobiology Laboratory offers testing for asbestos containing materials at our Virginia and Colorado locations. Both labs are accredited by NVLAP for PLM analysis (EPA 600/R-93/116) on building materials, soil, microvac samples, vermiculite and tape and Point Count (EPA 400/1000). We offer 2 hour TAT, same day, 24 hours and routine TAT. The Denver ...

    By Aerobiology Laboratory Associates, Inc. based in Dulles, VIRGINIA (USA). from Asbestos Analysis Service line

  • Environmental Allergen Analysis

    Aerobiology Laboratory offers environmental allergen analysis services which covers dust mites, cat and dog allergens, cockroach, urinary mouse and rat proteins and molds. We can also test for pollen concentrations, and elevated levels of other non-biological components of air that may illicit an allergenic response such as feathers, fiberglass, ...

    By Aerobiology Laboratory Associates, Inc. based in Dulles, VIRGINIA (USA). from Environmental Allergen Analysis Service line

  • Indoor Air Quality

    All of us face a variety of risks to our health as we go about our day-to-day lives. Molds are microscopic organisms that live on plant or animal matter. They aid in the break down of dead material and recycle nutrients in the environment. Extensive mold contamination may cause health problems. AmeriSci Bio-Chem is the country's leader for indoor ...

    By AmeriSci Group based in Midlothian, VIRGINIA (USA).

  • Asbestos Analysis: EPA Method 600/R-93/116

    Asbestos analysis includes testing of bulk building materials for asbestos by performing a visual estimation using the EPA Method 600/R-93/116. This asbestos analysis method is the most widely used method for estimating asbestos is bulk building materials and works well for most sample types. However, it might require a more detailed method like ...

    By EMLab P&K Office in Fairfax, VIRGINIA (USA). from Asbestos Analysis: EPA Method 600/R-93/116 Service line

  • Environmental Site Assessments

    Applied Environmental, Inc. conducts environmental site assessments (ESAs) to evaluate risk and potential liability associated with developed and undeveloped parcels of real estate in accordance with the American Society of Testing and Materials (ASTM). Our field personnel have conducted over 1,000 ESAs for commercial and industrial buildings and ...

    By Applied Environmental Inc. based in Reston, VIRGINIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you