material testing services in Washington

  • Testing Services

    Whether conducting compliance monitoring in the workplace or sampling to detect the source of a contaminant in the production process, RJ Lee Group can design the sampling plan, undertake the monitoring and collect and analyze the samples. Our experts are well-informed and current in standardized methodologies mandated by government standards such ...

    By RJ Lee Group, Inc. Office in Pasco, WASHINGTON (USA).

  • Geotechnical Testing

    KEMRON maintains a materials testing laboratory for physical and geotechnical testing of a wide range of material types, including soil, sludge and sediment.  In addition to traditional materials, we test hazardous and radioactive materials such as sludges, process wastes, tarry and oily materials, and other low-solids or contaminated ...

    By KEMRON Environmental Services, Inc. Office in Vaughn, WASHINGTON (USA).

  • Thermal Properties Testing

    This service specializes in determining thermal resistivity (ρ), thermal conductivity, thermal diffusivity, and specific heat of challenging solid, granular, and liquid materials.

    By METER Group, Inc. based in Pullman, WASHINGTON (USA).

  • Laboratory Testing Service

    Shannon & Wilson operates several full-service laboratories.  Our in-house, soils and construction-materials laboratories are staffed and equipped to test soil, rock, asphalt, and concrete.  Data provided by these laboratories assist engineers during project design and help determine specification conformance during project ...

    By Shannon & Wilson, Inc. based in Seattle, WASHINGTON (USA).

  • Lab Testing Services

    FKC offers no cost dewatering evaluations to potential customers. Lab testing of samples helps to determine polymer requirements, potential screw press performance, screw press sizing, screw press materials requirements and other important factors. After lab testing and an initial proposal, in many cases it is beneficial to conduct an on-site ...

    By FKC Co., Ltd. based in Port Angeles, WASHINGTON (USA).

  • Developmental Testing Services

    Many companies turn to General Plastics for developmental and engineering testing at any ­– or every – stage prior to production. We can cost-effectively test a single or small number of products through multiple iterations prior to expensive certification testing. For example, you may need to determine if your material meets the ...

    By General Plastics Manufacturing Co. based in Tacoma, WASHINGTON (USA).

  • Sediment & Dredged Material Evaluations Service

    Nautilus has extensive experience developing and conducting assessments of freshwater, estuarine, and marine sediments and dredged materials. Testing has been performed in support of a diverse array of projects across the United States, Canada, and throughout the Pacific Rim, ranging in scope from small-scale local assessments to an intensive ...

    By Nautilus Environmental Office in Tacoma, WASHINGTON (USA). from Sediment & Dredged Material Evaluations Service Service line

  • Special Inspection and Testing Services

    GeoEngineers has provided special inspection and construction materials testing services since 1999 in eastern Washington and northern Idaho. These services are utilized within all of our market sectors, serving a wide variety of transportation, education, medical, industrial, commercial and government clients.

    By Geo-Engineers based in Seattle, WASHINGTON (USA).

  • Physical Property Testing Services

    Rely on General Plastics’ experience and dedicated testing facilities for certified material and physical property testing. We confirm physical property or performance characteristics for safety, strength and impact resistance, and many other qualities. Expect fast turnaround from receipt of your material or design specifications, even if we ...

    By General Plastics Manufacturing Co. based in Tacoma, WASHINGTON (USA).

  • Pilot Plants - Design & Testing Support Services

    Many clients come to us wanting chemical engineering process design assistance after they have done some level of due diligence to confirm that their process technology should work in real life. Sometimes the available information will include well executed pilot plant trial data, process heat and materials balance information, and all the ...

    By Process Engineering Associates, LLC Office in Richland, WASHINGTON (USA). from Pilot Plants - Design & Testing Support Services Service line

  • Asbestos Analysis: EPA 1000 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 1000 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: EPA 1000 Point Count Service line

  • Asbestos Analysis: EPA 400 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 400 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: EPA 400 Point Count Service line

  • Asbestos Analysis: EPA 200 Point Count

    Asbestos analysis includes testing of bulk building materials for asbestos by performing 200 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: EPA 200 Point Count Service line

  • Pharmaceutical Services

    At ALS our Pharmaceutical Division is a provider of testing services to the Pharmaceutical and Healthcare industries in Australia, Europe and Asia. Committed to exceeding customer expectations we are able to provide high quality solutions across a range products, including human and veterinary products, intermediates and raw materials. Testing is ...

    By ALS Environmental Office in Everett, WASHINGTON (USA).

  • Asbestos, Lead, Mold, Radon, & PCB Abatement Service

    EBI Consulting provides testing, design and abatement services for asbestos-containing building materials, lead, mold, radon and PCBs. Our nationwide team provides support for projects ranging from telecommunications installations projects to real estate acquisitions and property development and rehabilitation projects.

    By EBI Consulting Office in WASHINGTON (USA). from Asbestos, Lead, Mold, Radon, & PCB Abatement Service Service line

  • Environmental Health & Safety

    Whether testing to support product MSDS or label requirements, detecting contamination in particulate or chemicals in vapor, or examining raw material or regulated industrial waste, RJ Lee Group materials experts work with industry clients in a mutual concern for workers’ health and safety. Many production and manufacturing industries face ...

    By RJ Lee Group, Inc. Office in Pasco, WASHINGTON (USA).

  • Asbestos Analysis: EPA Method 600/R-93/116

    Asbestos analysis includes testing of bulk building materials for asbestos by performing a visual estimation using the EPA Method 600/R-93/116. This asbestos analysis method is the most widely used method for estimating asbestos is bulk building materials and works well for most sample types. However, it might require a more detailed method like ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: EPA Method 600/R-93/116 Service line

  • Asbestos Analysis: Airborne Fiber Count (NIOSH 7400)

    Asbestos analysis includes testing of air sample for asbestos and other fibers by PCM. It is used primarily for estimating asbestos concentrations in air. It is used to show compliance with limits set by NIOSH, OSHA, and other regulatory agencies. The method does not differentiate between asbestos and other fibers and can also be used to estimate ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: Airborne Fiber Count (NIOSH 7400) Service line

  • Asbestos Analysis: Gravimetric Point Count

    Asbestos analysis includes a detailed and very labor-intensive testing of bulk building materials for its organic components, inorganic acid-soluble and insoluble components and asbestos concentration based on 400 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos and other components in ...

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Asbestos Analysis: Gravimetric Point Count Service line

  • Geotechnical and Geological Services

    Shannon & Wilson was founded in 1954 as a geotechnical engineering firm. We offer a complete staff of pro­fessional geotechnical engineers, geologists, technicians, and support personnel. We are adept at developing project scope and planning exploration programs, directing field drilling and sampling operations, completing laboratory ...

    By Shannon & Wilson, Inc. based in Seattle, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you