Only show results available in Virginia? Ok

Measure Wind Speed services

  • Anemometer Calibration Laboratory Services

    Estia Consulting & Engineering SA owns a cup anemometer calibration laboratory. The laboratory is accredited according to ISO17025:2005. It is fully equipped and performs calibrations for all types of cup anemometers. The calibrations are conducted in the closed test section wind tunnel which has been constructed by the company. The ...

    By Estia Consulting & Engineering S.A. based in Thermi- Thessaloniki, GREECE. from Wind Service line

  • Wind Measurements Services

    Key benchmark of a solid economic forecast for a potential wind farm site is the wind speed. In addition to external data sources (meteorological stations, reanalysis data, etc.) we run own wind measurements on project sites.

    By SoWiTec Group based in Sonnenbuehl, GERMANY. from Wind Measurements and Surveys Service line

  • Remote Sensing Services

    Remote sensing devices such as Galion Lidar offer wind farm developers powerful new options for assessing the wind resource at proposed or operational wind farm sites. They are a compact, portable, robust alternative to a traditional meteorological mast, which can be installed on a temporary and economic basis, with minimal impact and no ...

    By SgurrEnergy Ltd. based in Glasgow, UNITED KINGDOM. from Onshore Wind Service line

  • Noise impact assessments (NIA)

    Noise impact assessments (NIA) are an essential part of the planning process for renewable energy developments and our expert noise team has the capability to conduct assessments at all stages of the project lifecycle. The team is experienced in acting as due diligence assessor for banks and lending institutions who have noise considerations as ...

    By SgurrEnergy Ltd. based in Glasgow, UNITED KINGDOM. from Onshore Wind Service line

  • Meteorological Mast Services

    SgurrEnergy can support you through every stage of your wind resource assessment from initial site visits through to mast and instrumentation supply and installation to data recovery, reporting and decommissioning.

    By SgurrEnergy Ltd. based in Glasgow, UNITED KINGDOM. from Onshore Wind Service line

  • Anemometer Calibration

    Calibrated anemometers are essential for accurate wind speed and power curve measurements, and each one must be individually calibrated prior to a measurement campaign. As an accredited service, DEWI offers calibration to the MEASNET standard. Wind vane testing is also advisable, and can be performed by our experts.

    By DEWI GmbH - Deutsches Windenergie Institut based in Wilhelmshaven, GERMANY. from Services for Wind Farm Stakeholders Service line

  • Anemometer Calibrations Services

    With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Wind Tunnel Centre Service line

  • Wind Monitoring

    At the moment, if you want to erect a sizeable wind turbine, you generally have to put up a wind data mast first. This can be anything from 30m to 50m high, with anemometers on top to measure wind speeds at the height from the ground your turbine will operate at. An anemometer is a device used to measure wind speed and is a simple first step to ...

    By VG Energy based in Galston, UNITED KINGDOM.

  • Wind Campaign Services

    Finding and selecting the correct site for development is critical for a wind project success and profitability. KONA has extensive developer experience entering into new markets to find the best resource locations. As the resource is the most important criteria our experience is invaluable for you to find the right site. We study the ...

    By Shamrock Communications Ltd t/a KONA based in Meath, IRELAND.

  • Wind Tunnel Calibrations Services

    With our CSIRO designed wind tunnel situated at our Melbourne head office, we are the only NATA / ISO 17025 accredited laboratory in Australia that can calibrate all types of anemometers.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Site Assessment Service

    Wind Measurement, Energy Yield Assessment, Wind Farm Micrositing. Reliable predictions of the energy yield of wind farms are only possible on the basis of accurate near-site wind speed measurements. The critical aspects are selection of where the tower is to be placed, selection and calibration of anemometers, the height of the met mast and the ...

    By DEWI GmbH - Deutsches Windenergie Institut based in Wilhelmshaven, GERMANY.

  • Anemometer Calibration

    The use of wind tunnel-calibrated anemometers is necessary in order to identify the wind resource at planned wind farm sites. Deutsche WindGuard offers anemometer and wind vane calibration and classification services using two out of four company-owned wind tunnels.

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Site Assessment Service line

  • Ports and Harbours

    The movement of shipping in and out of ports and harbours always demands attention to detail, and the effects of the surface wind can, at times, produce dramatic results. Accurate display and knowledge of the wind speed, direction, gusts and variability can add significantly to the safety of vessels and their crews, as well as to the confidence of ...

    By Met Engineering Limited based in Manchester, UNITED KINGDOM.

  • Noise Propagation

    'Wind Turbines are noisy' – that bias is often heard during discussions about wind energy. Residents living in close proximity to wind farms often feel molested by the generated noise. Subsequently, propagation of noise immissions at noise receptor points at a designated site are part of the approval process prior to the erection of wind ...

    By Deutsche WindGuard GmbH based in Varel, GERMANY. from Site Assessment Service line

  • Environment & Laboratory Services

    We supply the following environmental / health & safety products for the detection and analysis of air, noise, dust, heat, gases and meteorological (weather) measurements: Sound Level Meters, Real Time Acoustic Analysers and Noise Dosimeters. Aerosol Monitor for real time dust measurement. Personal Air Sampling Pumps and Accessories for dust, ...

    By Data-Loop Ltd. based in Dorking, UNITED KINGDOM.

  • Air Velocity Calibration and Anemometer Calibration

    Air velocity calibration and anemometer calibration services are undertaken in the laboratories' universal wind tunnel, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated.  The facility can offer independent, UKAS accredited air velocity calibration for ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services Service line

  • Environmental Monitoring Services

    For all who struggle with the problem of traffic noise, we offer automatic monitoring station. In contrast to other noise measurement systems, we deliver solution to the long-term monitoring with flexible expansion capabilities that guarantee savings in time and resources. Station ENVIRO 151 is designed for continuous and long-term record of the ...

    By Far Data Ltd based in Cracow, POLAND.

  • Climate Stations and Management Solutions

    FlowWorks provides individuals with responsibility for climate stations with the tools to manage and analyze the numerous measurements including temperature, relative humidity, wind speed/direction, solar radiation, rainfall and snow totals that a typical climate station produces.

    By FlowWorks Inc. based in Everett, WASHINGTON (USA).

  • Custom Designs Services

    Do you have a special application that requires a wind velocity measurement, but the off-the-shelf ultrasonic anemometers don't physically fit your application?  Call the Applied Technologies, Inc. factory, we have no problem adapting and tailoring our ultrasonic technology to your application.

    By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA).

  • Premium

    Ambient Air Quality Monitoring Services

    Shell Engineering and Associates, Inc., specializes in ambient air quality monitoring services. As opposed to dispersion modeling’s  reliance on mathematical predictions,  ambient air monitoring actually measures for level of air quality at a specific location over a given time period.  The results of ambient air quality ...

    By Shell Engineering & Associates, Inc. based in Columbia, MISSOURI (USA). from Air Monitoring Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you