Only show results available in Virginia? Ok

Mechanical Balance services

  • Dynamic Balancing for Improved Operation

    Dynamic balancing is standard practice for reducing bearing load and running noise. Dynamic balancing after a repair can increase the lifetime and efficiency of your rotating equipment.

    By Sulzer Management Ltd based in Winterthur, SWITZERLAND. from General Mechanical Services Service line

  • Electrical Balance of Plant and Ancillaries Services

    Sulzer provides an extensive range of balance of plant (BOP) services for electro-mechanical rotating equipment such as motors, blowers and other kinds of equipment. Use our BOP services either on a planned or an emergency basis to maximize the reliability of your operations.

    By Sulzer Management Ltd based in Winterthur, SWITZERLAND. from Electro-Mechanical Services - Equipment Supported Service line

  • High-Speed and At-Speed Balancing Services

    Do you need balancing services for turbine, compressor and generator rotors up to 125,000 lbs (62.5 tons) at low speed and up to 50,000 lbs (25 tons) at full operational speed? Contact Sulzer for high-speed or at-speed balancing by our experienced technicians and engineers.

    By Sulzer Ltd. based in Winterthur, SWITZERLAND. from Electro-Mechanical Services - Engineering and Technical Support Service line

  • Pumping Station Maintenance Services

    A dedicated specialist workshop facility providing a complete range of pumping station maintenance, overhaul and repair services for pumps and associated pumping equipment.

    By Integrated Water Services Ltd. (IWS) based in Lichfield, UNITED KINGDOM. from Mechanical and Electrical Service line

  • Pump Efficiency Testing Services

    The provision of on-site pump efficiency testing and diagnosis of pumping plant and associated control equipment leading to pump repair and pump refurbishment.Detailed reporting of modifications and replacement works to extend the operating life of a facility and to enhance the efficiency of the equipment.

    By Integrated Water Services Ltd. (IWS) based in Lichfield, UNITED KINGDOM. from Mechanical and Electrical Service line

  • Balancing Services

    Dany Lessard has been involved with balancing more than 100 hydrogenerator units. His experience and expertise on that field help him to deal with more complicated cases, which occur from time to time. “It is not necessary to have a Masters’ degree in Mechanical Engineering on vibrations to perform the balancing of a hydrogenerator, ...

    By Hydro Expertise DL Inc. based in Dorval, QUEBEC (CANADA).

  • Mechanical Engineering

    Cooling Water System Analysis and Design, Pumps and Valves Modifications, Feedwater Heaters Analysis and Replacements, System Flow Modeling/CFD, Condenser Analysis and Modifications, Compressed Air System Analysis and Design, Diesel Generators Evaluations and Modifications, Cooling Towers Evaluations and Modifications, Steam Cycle Heat Balance ...

    By Enercon Services Inc based in Tulsa, OKLAHOMA (USA). from Power Generation Service line

  • Rotor Balancing Services

    Imbalance is created when a machine’s center of rotation differs from the center of gravity. The offset is most often a result of the customer’s production process. Products adhere to or break off of the rotor, which distorts the balance. Over time, the imbalance deteriorates other mechanical elements, such as bearings or other static ...

    By Vibration Specialty Corporation (VSC) based in Philadelphia, PENNSYLVANIA (USA).

  • Mechanical Engineering

    Our mechanical engineering experience stems from the locomotive and automotive industry, which enable us to offer design solutions of great variety of machines and mechanisms. We can you take your product from concept to manufacturing.

    By Siviko based in Sofia, BULGARIA.

  • Balanced Ecosystems & Budgets

    AquaBio's Watershed Restoration division offers economical watershed restoration of lake, river, lagoon, or other water bodies by means of “biomimicry,” & the latest bio-remedial science to create balanced ecosystems while preserving precious resources. We offer our clients lab & field-tested natural microbial blends for ...

    By AquaBio Environmental Technologies, Inc. based in Hawthorne, CALIFORNIA (USA).

  • Mechanical/Electrical/Plumbing Services

    CPH has recently added a new dimension in its multi-disciplined services with the addition of Dennis Matula, P.E., LEED-AP. Dennis provides over 38 years of expertise in mechanical, electrical, plumbing, fire protection, technology, energy and sustainable engineering services.

    By CPH Engineers, Inc. based in Sanford, FLORIDA (USA).

  • Clean Development Mechanism Carbon Trading Service

    The Kyoto Protocol (KP) was signed in 1997 to tackle climate change by reducing global emissions of the greenhouse gases (GHGs). The principle of KP is that wherever in the World GHGs are emitted, the impact on the climate will be same. As per the KP, developed countries (called as Annex I countries) have emission reduction targets to achieve in ...

    By Spectro Analytical Labs Limited based in New Delhi, INDIA. from Environmental Services Service line

  • Mechanical Biological Waste Treatment (MBT) Services

    MBT is a tried and tested process offering an alternative to landfill which is both more environmentally sound and more sustainable. MBT maximises the extraction of recyclate and other products (including refuse-derived fuel (RDF)) and ensures that material to landfill is minimised as well as biologically stabilised. ORA have extensive experience ...

    By Organic Resource Agency Ltd. based in Worcestershire, UNITED KINGDOM.

  • Premium

    Original Aerzen Special Oil

    Oil is not always ”Oil“! With decades of experience we know that 72% of all bearing problems are directly related to improper lubrication either due to contaminated oil, rapid ageing, or unsuitable quality for use in high speed machines. Be pro-active, ensure you use a lubricant that is designed for the high mechanical loading, varying ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Original Aerzen Parts Service line

  • Allocation Services

    Monitoring the measurement balance of your system is critical and when balance problems arise, our allocation team is your partner in identifying and resolving the problems.

    By Southern Petroleum Laboratories, Inc. based in Houston, TEXAS (USA). from Other Service line

  • Slag Treatment Installations Services

    For each design engineering is required for both the mechanical design and the control. Boasting many years of experience, the engineering department of Recco takes care of these designs. For each installation to be able to function, it is dependent on the customer-specific requirements and environmental-technical parameters. The mechanical ...

    By Recco Non Ferro Metals B.V. based in Emmeloord, NETHERLANDS.

  • Curing Methods

    The curing profile of each liner utilizes a delicate balance of resin catalyst level, curing temperature and time of exposure to maximize the installed physical properties.

    By Inliner Technologies, LLC based in Paoli, INDIANA (USA).

  • Micro Tunnelling Services

    Microtunneling is a trenchless construction method used to install pipelines beneath highways, railroads, runways, harbours, rivers, and environmentally sensitive areas. Microtunneling is defined as a remotely-controlled, guided, pipe-jacking operation that provides continuous support to the excavation face by applying mechanical or fluid pressure ...

    By Target Trenchless based in Al-Seef,, KUWAIT.

  • Facility Design Consulting

    ECS engineers provide complete facility design services that begin with simple facility drawings for initial sales presentations and planning, to final mechanical and electrical submittal drawings. Our services include process design, facility sizing, calculations for air handling requirements, mass/balance analysis, moisture management, odor ...

    By Engineered Compost Systems (ECS) based in Seattle, WASHINGTON (USA).

  • Water Resource Management & Engineering

    Our specialist skills in water system design and resource management, water balance modelling, terrain modelling and engineered landscape design facilitate informed and systematic evaluation of project issues and the development of carefully tailored, effective management solutions.

    By Umwelt (Australia) Pty Limited based in Toronto, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you