We couldn't find any metals in water services suppliers or service providers located in Mississippi

Here is a list of services results with suppliers serving Mississippi

metals in water services available in Mississippi

  • Industrial Waste Stream Compliance

    Companies must routinely test for metals, organics and biological prior to discharge of used water to meet local city regulations.  Whether grab or 24-hour composites, Armstrong will collect and analyze your waste stream samples to meet permitting requirements.  Identify your analytical requirements and e-mail them to us for an immediate ...

    By Armstrong Forensic Laboratory, Inc. based in Arlington, TEXAS (USA).

  • Drilling for Storage Tank Cathodic Protection

    Clean Harbors Drilling for Storage Tank Cathodic Protection involves directional drilling under large storage tanks at refineries to allow for the installation of cathodic protection. Cathodic protection techniques test and control the corrosion of a metal surface by making it work as a cathode of an electrochemical cell. This is achieved by ...

    By Clean Harbors based in Norwell, MA, MASSACHUSETTS (USA). from Drilling for Storage Tank Cathodic Protection Service line

  • Risk Assessments/Regulatory Closure Evaluations

    CEA has conducted human health risk assessments at over 100 disposal sites located throughout the Commonwealth including gasoline services stations, commercial/industrial properties, private residences, condominium complexes, public buildings and a former rifle and skeet shooting range. Projects sites have included oil and/or hazardous material ...

    By Corporate Environmental Advisors, Inc. based in West Boylston, MASSACHUSETTS (USA).

  • Elemental Analysis Services

    Galbraith has the capability to test a wide variety of sample types to detect and quantify most elements listed in the Periodic Table. Approximately 1000 different procedures are used in the analysis of samples, which include organic, inorganic, metal, paper and pulp, coal, water and waste. To provide clients with the most accurate data possible, ...

    By Galbraith Laboratories Inc. based in Knoxville, TENNESSEE (USA). from Elemental Analysis Services Service line

  • Lead Services

    Lead is a toxic heavy metal that was used for many years in products found in and around homes and buildings. In the past, lead was also used regularly in fuel, paint, ceramics, caulk, pipes, and solder among other things. Lead can also be emitted into the air from industrial sources and leaded aviation gasoline, and lead can enter drinking water ...

    By VOETS, LLC based in New York,, NEW YORK (USA). from Lead Services Service line

  • Electronic Utility Locating Services

    Conventional Pipe and Cable locators are an important tool used in most utility designation studies. The locators can be used in either a passive or active mode. The most common use for the passive mode is to find cables and conduits carrying live power (50-60 Hz) and communication cables (29-33Hz) signals. In the active mode, a current is ...

    By GeoView, Inc. based in St. Petersburg, FLORIDA (USA). from Electronic Utility Locating Services Service line

  • Mining Services

    Mine closure often involves long-term water management issues.  NWC has been involved in the design of a number of treatment associated with old mine works.  These applications are quite diverse, and range from wetlands designed to remediate Acid Mine Drainage (AMD) from old coal works, to sulfate-reducing wetlands to remove heavy metals ...

    By Naturally Wallace Consulting based in Vadnais Heights, MASSACHUSETTS (USA).

  • Pipeline Systems & Fabrication

    Bell Environmental has the expertise, facilities and technology to produce reliable, high performance pipeline systems to meet diverse requirements. Our “in house” mechanical and fabrication facilities enable us to provide a high quality end product in a timely manner. Bell Environmental can offer: Design and construct water and ...

    By Bell Environmental based in Melbourne, AUSTRALIA.

  • Acid Rock Drainage Services

    Acid rock drainage and metal leaching (ARD / ML) has become increasingly important with regards to waste material management.  Acid rock drainage (ARD) occurs when sulphide rich material is exposed to air and water through construction of mines, roadways, etc. The material becomes oxidized resulting in the formation of acidic metal rich ...

    By Lorax Environmental Services Ltd. based in Vancouver, BRITISH COLUMBIA (CANADA). from Acid Rock Drainage Services Service line

  • Innovation

    Non-metallic components are technologically superior to conventional materials such as steel. The weight of special non-metallics, their design, durability, energy consumption, ease of handling, and maintenance are all make them a good choice for use in water and wastewater technology.

    By Probig GmbH based in Vöcklamarkt, AUSTRIA.

  • Quality

    Modern water and wastewater technology will play a vital role in the industry of the future. By choosing special non-metallics you are opting for an up-to-the-minute solution which has critical advantages over any conventional material.

    By Probig GmbH based in Vöcklamarkt, AUSTRIA.

  • Wastewater

    Pretreatment System Design. Chemical Reduction / Optimization. Metals Pretreatment System. NPDES Permitting. Engineering Reports. Conveyance System Capacity Analysis. Water Re-Use Systems. Feasibility / Pilot Studies.

    By Aquarius Environmental based in Portland, OREGON (USA).

  • Incubator Decontaminations Services

    DRS customizes each decontamination specific for the incubator model, DRS Laboratories' “Incubator 4-Type-Decon” is used, which includes, Autoclaving of metal removable metal components, Chlorine Dioxide gas decontamination of incubator interior, Surface decontamination of gaskets, water lines, and other semi-porous materials, ...

    By DRS Laboratories, Inc. based in Lehigh Valley, PENNSYLVANIA (USA).

  • Continuous Metal Heat Treating Service

    Mesh and cast link belt furnaces, each capable of processing over 4,000 pounds per hour. Computer controlled loading, processing, and tracking systems. Consistent Quality Results. Rapid Turnaround of Large Quantities. Automatic Carbon control - Carburizing, Carbonitriding, and Neutral Hardening. Oil, Polymer, Caustic, and Water quench capability

    By PAULO based in St. Louis, MISSOURI (USA). from Continuous Metal Heat Treating Service Service line

  • Laser & Water Jet Cutting Services

    Baghouse & Industrial Sheet Metal Services, Inc. uses “State of the Art” Laser & 5-Axis Water Jet Cutting processes to assure precision quality of all of our fabrications with a major reduction in labor intensive Deburring and Quality Control issues related to Turret Punching and Plasma Cutting. We offer full time Laser and ...

    By Baghouse & Industrial Sheet Metal Services Inc. based in Corona, CALIFORNIA (USA).

  • Pipes location

    Thanks to the use of forefront technologies and continue update courses, our technician are able to find whatever type of pipes (plastic or of metal pipes). We measure pipes since a depth of 6m. We can locate: -Water pipes -Drain pipes -Electric cables -Telephone cables.

    By Huberg S.a.s. based in Bolzano, ITALY.

  • Wastewater Product & Services

    Aargus services industry and government with wastewater specialists to provide the right advice, equipment, products and chemicals to meet specific requirements in treating, managing and monitoring water. Industries of relevant experience include: food, building and construction, automotive, petroleum, cosmetics, chemical, paper, manufacturing, ...

    By Aargus based in Drummoyne, AUSTRALIA.

  • Nanofiltration

    Recovery of valuable compounds (i.e. cip cleaning agents). Drinking water production (i.e. decarbonisation). Recycling of acid cleaning solutions. Removal of heavy metals.

    By Beroplan GmbH Membran- und Prozesstechnik based in St. Ingbert, GERMANY. from Nanofiltration Service line

  • Highly Toxic Metal Lead

    Lead is a highly toxic metal found in products including paint, ceramics, pipes, solders, gasoline, batteries and cosmetics. Since 1980, federal and state regulatory standards have helped to minimize or eliminate the amount of lead in consumer products and occupational settings. Today, the most common sources of lead exposure in the United States ...

    By RDS Environmental based in Broomfield, COLORADO (USA). from Highly Toxic Metal Lead Service line

  • Pools & Water Treatment Services

    Reliable management of pH and alkalinity plays a key role in water quality. ARM & HAMMER products are known for quality performance, helping make pool water safer to swim in, drinking water safer to ingest, and for assisting in cleanup and remediation of wastewater. Our Alkalinity First sodium bicarbonate handles easily, doesn’t dust, ...

    By Church & Dwight, Inc. based in Princeton, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you