Only show results in Connecticut? Ok

NESHAP services

  • NESHAP and NSPS Compliance

    NESHAP-NSPSTrinity tracks the ongoing development and promulgation of New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous Air Pollutants (NESHAP). NSPS apply to equipment in nearly every facility and are one of the first areas addressed in many permitting studies. With nearly ...

    By Trinity Consultants based in Dallas, TEXAS (USA). from Compliance Assistance Service line

  • RICE NESHAP Compliance

    Air (NESHAP) ...

    By Cummins Inc. - Cummins Emission Solutions based in Columbus, INDIANA (USA).

  • NESHAP Stage I Vapor Balancing Services

    One of the most recent regulatory requirements for UST facilities is the EPA’s National Emission Standards for Hazardous Air Pollutants, better known as NESHAP, Subpart CCCCCC. This new regulation, which is intended to help minimize the fuel vapors released from a fueling facility, requires most ...

    By Tanknology Inc. based in Austin, TEXAS (USA). from Compliance Testing Service line

  • Premium

    Dust Collection Solutions

    Dust poses serious risks to both worker health and your entire facility. Grinding and blasting, cutting and sanding, and working with composites, metal, or stone produce a wide range of potentially hazardous dust that can compromise product quality and settle into every crook and crevice of your valuable machinery. Duroair can safeguard your employees and operations from dust exposure and help ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Painting & Coating Solutions

    Whether your focus is aesthetics quality control or corrosion protection, surface-prep dust can wreak havoc on your coating and painting processes. Add the impact of conventional industrial spray booths on intermittent applications and material handling, and you have a recipe for the bottom-line ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Non-Destructive Testing Solutions

    Non-Destructive MPI and UV Testing Made Simple. Detecting metal surface flaws is no easy task, especially when you’re using magnetic particle inspections (MPIs), ultraviolet light (UV), or liquid penetrant testing to locate potentially dangerous particles not visible to the human eye. These precise, non-destructive testing procedures require a space that is large enough to work around ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Oil Mist Collection Solutions

    Capturing Oil Mist to Improve Health, Safety, and Efficiency. Oil mist particles, bacteria, and spores generated by metal cutting, grinding, and welding can settle on every piece of equipment on the shop floor, endangering machinery and risking slips and falls. And, you don’t need OSHA to remind you of the potential skin irritations, respiratory dangers, and cancer risks associated with a ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Metal Cutting Solutions

    Bring Safe, Clean Air to Each Metal Cutting Task. From laser and plasma cutting to grinding and sanding, working with metals can produce a toxic cloud of oil mist, fine particulate dust, and fumes that not only threaten your machinery and electronics, but endanger your most valuable assets – your employees. There’s also the risk of fines if your facility doesn’t walk the ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Clean Room Solutions

    Ensuring quality control while balancing long-term construction with short-term cutting, welding, or surface prep and spraying tasks is an ongoing logistical challenge. Navigating these cellular workflows is critical for aerospace OEMs, ship and boat manufacturers, and for operations conducting prototyping and R&D. How do you cost-effectively isolate manufacturing processes to keep damaging ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Asbestos Abatement (Removal)

    Performed to NESHAP / OSHA / MDEQ / EPA Standards Oversight, removal, transportation and ...

    By KIRBY ENVIRONMENTAL based in REXFORD, MONTANA (USA).

  • Regulatory Compliance Services

    Benefit from our experience and our solid relationship with the regulatory community. We specialize in regulatory applicability determinations and development of compliance tools and strategies for minor, synthetic minor, Title V, NSPS, and NESHAP-applicable sources. We'll identify your regulatory ...

    By Mountain Air Consulting, LLC based in Denver, COLORADO (USA).

  • Management Planner

    Performed to NESHAP / OSHA / MDEQ / EPA Standards AHERA / EPA compliance. Required for schools and recommended for commercial ...

    By KIRBY ENVIRONMENTAL based in REXFORD, MONTANA (USA).

  • Project Design

    Performed to NESHAP / OSHA / MDEQ / EPA Standards Permit compliance, engineering controls, analysis, etc. Required for permitted ...

    By KIRBY ENVIRONMENTAL based in REXFORD, MONTANA (USA).

  • Air Including Clean Air Act

    Emissions Inventory: Review and Completion, Permitting: Evaluation, Completion, Negotiation, Control Technologies, NESHAPs (HAPS): Evaluation, Controls, Early Reduction, Risk Management Plans, RACT: Assessments, Exemptions and Proposals, Natural Minor and Synthetic Minor Permits, Title V: Exemptions, ...

    By Environmental Strategy Consultants, Inc. based in Philadelphia, PENNSYLVANIA (USA).

  • Testing & Evaluation Services

    A vital diagnostic tool, stack testing can expose an array of real and potential air pollution control issues. In the new and stricter regulatory environment (e.g. Utility MATS, ICI Boiler NESHAP, Portland Cement Kiln NESHAP, etc.), Novinda’s skilled staff of engineers and air quality specialists, all with ...

    By Novinda Corp. based in Littleton, COLORADO (USA).

  • Asbestos Analysis

    Bulk Sample Analysis of Building Materials by Polarized Light Microscopy (PLM). Air Filter Analysis for Fiber Concentration by Phase Contrast Microscopy (PCM). Air Filter, Bulk Material and Water Analysis by Transmission Electron Microscopy (TEM). OSHA PEL Compliance by TEM. Point Counting for NESHAP Compliance ...

    By STAT Analysis Corporation based in Chicago, ILLINOIS (USA). from Analytical Capabilities Service line

  • Regulatory Compliance Permitting Services

    , Synthetic Minor, NESHAPs, NSPS, PSD, NSR, BACT ...

    By Blackshare Environmental Solutions based in Tulsa, OKLAHOMA (USA). from Regulatory Compliance Services Service line

  • Air Emissions Compliance

    and forest products, metals production and fabrication, plating and coating operations; and many others. We can provide the expertise required to meet state and federal rules including the recent US EPA area-source NESHAPs, Boiler MACT, RICE MACT; and 'residual risk' rule revisions to existing NESHAP/MACT standards. We ...

    By Cardinal Environmental based in Sheboygan, WISCONSIN (USA).

  • Asbestos/Hazardous Material Inspections Services

    Thorough inspections of buildings and facilities are completed by at least one Michigan Accredited Asbestos Inspector. Global completes on-site inspections which follow AHERA, MIOSHA, and NESHAP regulations along with the specific requirements of the client. Global provides all personnel, equipment, and ...

    By Global Environmental Engineering based in Traverse City, MICHIGAN (USA).

  • Air Quality Services

    TCEQ Air Quality Permits, Title V Operating Permits, Emissions Inventories, BACT Analyses, Atmospheric Dispersion Modeling, NSPS, NESHAPS, and MACT Compliance, TCEQ Regulatory Compliance, TCEQ Standard Permits, Permits-by-Rule, and ...

    By Green Environmental Consulting based in TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you