Oil-In-Water Testing services available in Oklahoma

  • Premium

    Pilot Test with WesTech

    Piloting is a great way to study the treatability of raw water, determine operating parameters, and optimize an efficient full-scale process design. With WesTech’s variety of pilot plants available, we can help you test a single process or a complete multi-step process.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Sigma Test & Research Centre - Concrete Testing Services

    Concrete Testing, Design mix, Ultrasonic Survey, Chloride Content, Chloride Permeability, Chloride Ponding, Cube Compressive Strength, Depth of Carbonation, Drying Shrinkage/ wetting Expansion, Flexural Strength,Porosity, Sulphate Content, Water Absorption, Water penetration, Pile Integrity Test (PIT), Ad Mixture

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • Sigma Test & Research Centre - Refractory Materials Testing

    Refractory Testing,Creep Test, Permanent Linear Change, Pyrometric Cone Equivalent, Refractories Under Load, Abrasion Test, Air permeability Test, Petrographic analysis by Optical Microscopy, Acid Resistance Test, Thermal Conductivity, Particle Size, Water absorption, Apparent Porosity, Cold Crushing Strength, Bulk Density,Modulus of Rupture, ...

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • Sigma Test & Research Centre - Aggregate Testing Services

    Aggregate Testing, 10% Fine Value, Alkali Aggregate Reactivity, Chloride Content, Clay Lumps and friable Particles, Clay Slit and Dust passing/ Sieve, Compaction Fraction, Crushing Value, Drying Shrinkage, Flakiness and Elongation Index, Impact Value, Lightweight Pieces,Los Angle Abrasion, Organic Impurities Effect on Mortar Strength, Organic ...

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • Sigma Test & Research Centre - Brick Testing Services

    Brick Testing, Apparent Porosity and Density, Water Absorption, Permanent Linear Change, Abrasion Resistance, Creep Test, Modulus of Rapture, Fly ash/Lime Brick

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • Sigma Test & Research Centre - Granite/Marble Testing Services

    Granite/Marble Testing ServicesWater absorption: Test Method: IS: 1124-1974, IS: 13030-1991, ASTM C 97-2009Mohs Hardness: Test Method: IS: 13630 (P-13) 2006Modulus Rapture: Test Method: IS: ASTM C 99-2009, IS: 1578 (P-5)1993Dimension Testing: Test Method: IS: 1130-1969, IS: 3316-1974, IS: 14223 (P-1) 1995, IS: 3622-1977, ASTM C 625, 616, 629, ...

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • DYNAFLOW, INC. INTRODUCES ITS EXPANDED SPECIALIZED MATERIALS TESTING SERVICES TO INCLUDE THE TESTING OF COATINGS AND COMPOSITE MATERIALS

    DYNAFLOW, INC. has expanded its range of specialized materials testing services to include testing of composite materials and coatings. DYNAFLOW has been conducting new testing methods specific to elastomers, composite materials, and thin coatings. To augment its capabilities to test the resistance of materials to cavitation and liquid impact, a ...

    By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from Testing Service line

  • Chemical And Microbiology Laboratories On-Site Analysis Services

    Dynaflow has chemical and microbiology laboratories on-site. Analytical chemistry capabilities include trace organic analysis of water and air using gas chromatography (GC/FID and GC/PID) and mass spectroscopy (GC/MS with EI/CI/NCI). Several water quality analyses are also available including, pH, Total Organic Carbon (TOC), Chemical Oxygen Demand ...

    By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from Testing Service line

  • Premium

    Water & Wastewater Testing Services

    We provide our customers with the most up to date knowledge and technologies for effective biological wastewater treatment. Environmental compliance which is cost effective and combined with expert planning and rapid response can save your company millions of dollars in product costs and legal liability.

    By Microbe Inotech Laboratories, Inc based in St. Louis, MISSOURI (USA). from Environmental Services Service line

  • Drinking Water Testing

    Optimisation and functional analysis of water treatment. Technical advice for water distribution companies. Accredited sampling and analyses e.g. Pesticides. Efficient evaluation. Reporting. Planning of construction and refurbishment of waterworks. Legionalla check.

    By Eurofins Scientific based in Kraainem, BELGIUM. from Environment Testing - Water Testing Service line

  • Tests

    Master meters are tested, using a Pitometer rodmeter, to validate production statistics and calibration data. The master meter tests are conducted by inserting a Pitometer rodmeter in series with the meter and comparing the rate of flow indicated by the Pitometer rodmeter with the rate of flow indicated by the master meter.

    By ADS Environmental Services based in Huntsville, ALABAMA (USA). from Water Services Service line

  • Premium

    Food Safety & Testing Services

    The MiL, Inc. routinely performs rapid microbial identifications, confirmations and tracts contaminant sources of all pathogenic, indicator, and spoilage organisms using the latest techonologies such as GC-FAME, Biolog®, Ribotyping, and 16S rRNA base pair sequencing. Our computerized identification databases have over 3,500 microorganisms ...

    By Microbe Inotech Laboratories, Inc based in St. Louis, MISSOURI (USA).

  • Premium

    Pilot Plants Testing Services

    Pilot testing enables our customers to verify the best feasibility of the proposed separation processes by Lenntech water treatment. In addition, innovative solutions and new developments and designs can be optimized to supply our customers with the best and most cost-effective solution to their separated wishes. Lenntech can also build customer ...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Feed Water and Pre-Treatment Tests for Laboratory Service

    In order to optimise the operation of a membrane plant it's essential to fully understand the chemical nature of the feed water. From statistical analysis of the results of membrane autopsies we've carried out over the past ten years, we have concluded that more than 50% of membrane fouling and failure events result from inadequate pre-treatment. ...

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Air and Water Field Testing Services

    Air and water field testing, conducted on installed windows and curtain walls, is intended to help ensure the quality of installation, the performance of installed products, and verify compliance with architect and industry specifications. It also identifies the source of water damage and leakage problems in the field through forensic ...

    By UL LLC based in Camas, ILLINOIS (USA). from Testing Services Service line

  • iATL - Water and Other Aqueous Samples

    The analysis of Water and Other Aqueous samples for asbestos content continues to mature. This growth is evidenced by recent method developments by EPA. Investigations of asbestos in drinking water are conducted when water supply pipes are disturbed or replaced. Municipal utilities serving certain populations are required to test this analyte. ...

    By International Asbestos Testing Laboratories (iATL) based in Mt. Laurel, NEW JERSEY (USA). from Asbestos Testing Service line

  • Air and Water Field Testing Services

    Air and water field testing, conducted on installed windows and curtain walls, is intended to help ensure the quality of installation, the performance of installed products, and verify compliance with architect and industry specifications. It also identifies the source of water damage and leakage problems in the field through forensic ...

    By UL Environment based in Marietta, GEORGIA (US) (USA). from Testing Services Service line

  • Air, Water and Structural Mock-up Testing Services

    Architects, contractors, consultants and building owners require performance testing of exterior wall system mock-ups to evaluate air and water resistance and structural integrity. UL works closely with all our customers to assess design, workmanship and material selection prior to job site construction. By testing preconstruction mock-ups, we are ...

    By UL Environment based in Marietta, GEORGIA (US) (USA). from Testing Services Service line

  • Legionella Testing

    Outbreaks of Legionnaires' disease receive significant media attention especially when a large number of people become ill or die. In contrast to highly publicized outbreaks, single infections with Legionella bacteria often go unnoticed. According to the Centers for Disease Control and Prevention (CDC), between 8,000 and 18,000 people are ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Legionella Water Testing Service line

  • Food & Beverage Sensory Testing Services

    St. Croix Sensory provides sensory testing services to the food and beverage industry, including categories such as: retail/grocery, restaurant and food service, ingredient suppliers, flavor companies, municipal and bottled water, pharmaceutical, and alcoholic beverages.

    By St. Croix Sensory, Inc. based in Stillwater, MINNESOTA (USA). from Testing Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you