Oxidizers services in Europe

  • Premium

    Spare and Replacement Parts for Oxidizers

    Having the necessary spare parts readily available is a prerequisite for minimizing the cost and inconvenience of system shutdowns. At Anguil, we have put a lot of effort into developing replacement part plans to support oxidizers built by us as well as other manufacturers. We take inventory of your oxidizer needs and recommend what spare parts ...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM. from Oxidizer Aftermarket Services Service line

  • Premium

    Oxidizer Retrofits and Upgrades Services

    Abatement system selection and the final design are based on emission constituents, concentrations and airflow.  Rarely will these process conditions remain unchanged for the life of an oxidizer, possibly resulting in shutdowns, a decrease of DRE (Destruction Removal Efficiency), and increase in ...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM. from Oxidizer Aftermarket Services Service line

  • Premium

    Preventive Maintenance and Oxidizer Evaluations Services

    Did you know that some air permits require oxidizer operators to have scheduled maintenance programs for their systems in order to remain in compliance with regulations? The Anguil PME is a thorough audit of a system's operation, covering multiple days and an extensive checklist. Upon completion, customers receive a detailed report with ...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM. from Oxidizer Aftermarket Services Service line

  • Premium

    General Oxidizer Service & Maintenance

    Anguil has more than three decades of experience supplying the full range of oxidizer technologies and servicing thousands of oxidizers of all makes and models. In today's volatile market there are not many competitors that can make that claim. Indeed, quite a few of our service customers own oxidizers from manufacturers that just are not around ...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM. from Oxidizer Aftermarket Services Service line

  • Premium

    Structured Media Care Program Services

    Structured media beds can often be plugged by inorganics or particulate that is difficult to remove with a bake-out, vacuuming, or basic flush. To help maintain the peak performance of regenerative thermal oxidizers and regenerative catalytic oxidizers, B&W MEGTEC offers a high-volume chemical cleaning system solution that can help restore ...

    By Babcock & Wilcox MEGTEC LLC Office in Lisses, FRANCE.

  • Nitrogen Oxides (NOx) Emission

    Nitrogen oxides emission is influenced by the molecules of the ECOBIK‘s additives in two ways: The concentration reduction in burned gases, due to large reductions of excess air needed, added to the reduction of fuel’s specific consumption; the possible generation in combustion, in the high-temperature zone where the thermal NOx would ...

    By KUBIK Prod Com SRL based in Bucharest - 2, ROMANIA. from Emissions Service line

  • Catalytic Oxidation Services

    The oxidation of the pollutants takes place using a catalyst, which greatly reduces the activation energy required for the completion of the reaction. The plant can be equipped with a conventional heat recovery section (recuperative catalytic oxidation) or regenerative type (with the use of ceramic materials), optimizing in this way the energy ...

    By BROFIND SPA based in Milano, ITALY.

  • Oxidant Demand and Cost Estimation

    FMC will perform oxidant demand and cost estimation using your site parameters for KlozurTM Persulfate, KlozurTM CR and PermeOx tm Plus.

    By PeroxyChem (formerly FMC Corporation) Distributor in GERMANY.

  • Sulfur Oxides (SOx)

    Sulfur oxides are generated in combustion, especially SO2.  Part of these oxides arrives at SO3, in variable proportions depending on each fuel compositions and the intrinsic performance of firing system. In the burned gases, SO3 meets the necessary conditions to change into sulfuric acid: water molecules, necessary catalysts (V2O5 or Fe2O3) ...

    By KUBIK Prod Com SRL based in Bucharest - 2, ROMANIA. from Emissions Service line

  • Advanced Oxidation Process (AOP)

    Advanced oxidation processes (AOPs) are defined as processes which involve in situ generation of highly potent chemical oxidants such as hydroxyl radicals in sufficient and optimum quantities to significantly enhance the oxidation and destruction of a wide range or organic pollutants in contaminated water and air.

    By ESCO International (EI) based in Glan Conwy, UNITED KINGDOM.

  • Chemical Oxidation Services

    Oxidation processes can be used to transform organic contaminants into less toxic and less mobile forms, with complete reactions producing carbon dioxide and water. They are referred to as 'redox reactions',  as the oxidising agent gains electrons (reduced valence state-reduction) while the contaminant loses electrons (increased valence ...

    By Heijmans Blackwell Remediation Ltd based in Essex, UNITED KINGDOM. from In-situ Processes Service line

  • Chemical - In-itu Chemical Oxidation

    Verhoeve Environment & Water is market leader within in-situ chemical oxidation (ISCO) in the Netherlands and Belgium. We have some 10 years experience in chemical technologies for remediation of soils and water treatment. These techniques are particularly suitable for obtaining high decontamination yields in a relatively short period of time ...

    By Verhoeve Milieu & Water based in Dordrecht, NETHERLANDS.

  • Thermal Oxidation Installation Services

    The thermal oxidation allows the transformation of pollutants into secondary products with a reduced environmental impact through the completion of the following reaction:  COV + O2 = CO2 + Energy Activation + H2O + heat. The reaction must take place under suitable temperature conditions, turbulence and residence time in a combustion chamber; ...

    By BROFIND SPA based in Milano, ITALY.

  • Waste Oxide Agglomeration

    Significant economic savings can be generated by micro-pelletizing waste oxides, through the raw material replacement and elimination of landfill charges. Micro-pelletized steel mill by-products can be directly inserted into the sintering process, as a substitute for low-grade iron ore or scrap. In conjunction with direct savings, ...

    By Harsco Metals & Minerals based in Leatherhead, UNITED KINGDOM. from Resource Recovery Solutions Service line

  • Oil Services: Applying Advanced Oxidation

    Whether for permanent or temporary applications, CatalySystems can provide a solution from its range of AOP water treatment systems. Either stand-alone or in combination with pre-treatment solutions, our advanced designs offer improved energy-savings and reduce water consumption and disposal costs.

    By CatalySystems Ltd. based in Middlesbrough, UNITED KINGDOM.

  • Disinfection and Cleaning Air Strippers and Oxidators

    Mechanical deacidification systems, like air strippers and oxidators, have to be cleaned and disinfected regularly because of the frequency of strong iron and manganese deposits.

    By Mösslein GmbH based in Lohr am Main, GERMANY. from Hygiene Services Service line

  • Regenerative Thermal Oxidation Installation Services

    In the regenerative thermal oxidation plants the heat recovery takes place by using ceramic materials able to accumulate and lose heat quickly , depending on the direction of crossing of the gases that pass through them. We propose solutions to 2 rooms, 2 rooms with compensation, 3 bedrooms, 5 rooms or more depending on the efficiency of abatement ...

    By BROFIND SPA based in Milano, ITALY.

  • Resource Recovery Solutions For Waste Oxides

    Many integrated steelmakers recycle their particulate by-products to the sinter plant. However, because of the low volume and poor handling characteristics of the materials, this often results in variations in the composition and homogeneity of the sinter bed with implications for sinter plant productivity.

    By Harsco Metals & Minerals based in Leatherhead, UNITED KINGDOM. from Resource Recovery Solutions Service line

  • KlozurTM Persulfate Soil Oxidant Demand (SOD) testing

    FMC can perform KlozurTM persulfate soil oxidant demand (SOD) testing for your soils and groundwater at our laboratories in Tonawanda, NY.

    By PeroxyChem (formerly FMC Corporation) Distributor in GERMANY.

  • SOx Sulfur oxides · air pollution · consultants

    SOx Sulfur oxides - especially sulphur dioxide, a chemical compound with the formula SO2. SO2 is produced by volcanoes and in various industrial processes. Since coal and petroleum often contain sulphur compounds, their combustion generates sulfur dioxide. Further oxidation of SO2, usually in the presence of a catalyst such as NO2, forms H2SO4, ...

    By Canarina Environmental Software based in Canary Islands, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you