Only show results in Michigan? Ok

part cleaning services

  • Premium

    Fischer Edelstahl - Wastewater Treatment

    Fischer Edelstahl GmbH, a company based in Achern in Germany, has a hall for washing machine parts and transport equipment soiled with various substances, including cooling lubricant emulsions. The assembly cleaning process, which involves a high-pressure cleaner, a part washing machine and floor cleaning machines, produces approximately 3 m³ ...

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY. from Service line

  • Premium

    Repair Services

    Repairs are essential too. If performed swiftly and correctly, they cause no inconvenience. We are able and willing to do this for you. However, only cleaned parts can be repaired. The parts affected by this and the factors to be taken into account can be found in our Guideline Repair . In addition, safety data sheets relating to the ...

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Training Services

    We can offer you specific training packages. The highest level of reliability for all TOMRA sorting technology can be achieved via  trained customer staff and regular technical inspection by our service engineers. In particular, this partnership ensures that your equipment is always adjusted to the highest level of performance.

    By TOMRA Sorting GmbH based in Asker, NORWAY. from Service & Support Service line

  • Premium

    Repairs Services

    In our newly-equipped and designed repair center, we offer repairs of AERZEN Positive Displacement Blowers, Screw Compressors and Gas Meters as well as external blower and compressor stages. No matter whether you ask for the repair of an AERZEN stage or an external stage you in person can effect assembly and disassembly of the stages as well as ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Field Service Service line

  • Premium


    From the most complicated data highway interfaces to the simplest open vent, L&J Technologies is the single source for your tank service needs. For more than thirty years, L&J Technologies technical service specialists have repaired computer systems, electronic gauges, conservation vents, and other tank fittings.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA).

  • Third Party Services

    Our award-winning Field Service team, by servicing your sub-fab equipment and utilizing our extensive knowledge base, accomplishes this in the following technology segments: Vacuum Pumps Point of Use Abatement Cabinets Chillers RF Power Supplies Mass Flow Controllers Specialty process kit parts cleaning

    By Ebara Technologies Inc based in Sacramento, CALIFORNIA (USA).

  • Grease Trap Cleaning

    If you have ever asked how to clean a grease trap, you are in the right place. Grease traps must be cleaned every 4-6 weeks. An unmaintained grease trap does not stop any grease waste from entering the sanitary sewer or septic system. Grease blockages cam ruin a restaurant in minutes from back-ups. Sanitizing a restaurant from a grease backup will ...

    By Goslyn Ontario - Grease Recovery Devices based in Aurora, ONTARIO (CANADA).

  • Value Added Services

    CAD & Solidworks Design, Reverse Engineering, AutoFrettage- 140,000 PSI, Cleaning, Part Labeling, Pin stamping, Packaging.

    By Dynamic Tube Inc. (DTI) based in Maquoketa, IOWA (USA).

  • Inspections, Maintenance and Modifications Services

    Depending on the task, work is performed on-site or the valve is dismounted professionally and sent to the Adams factory using an appropriate transportation method. When performing inspections, parts are cleaned, tested (e.g. tear audit, ultrasound test), repaired, prepared or replaced. The scope of repair and preparation work is discussed and ...

    By ADAMS Schweiz AG based in Serneus, SWITZERLAND.

  • Service Center

    We are underway for our customers every day, around the world. The service work we perform provides us with a continual stream of new knowledge and experiences that culminates in valuable improvements and enables us to permanently optimize our range of services. These services include precise installation work, in-house or on-site trouble ...

    By Kelvion Holding GmbH based in Bochum, GERMANY.

  • Parts and Equipment Cleaning

    Our Parts and equipment cleaning capability employs two types of equipment, the first is ultra high pressure (UHP) water jet and the second a fluidized bed. These two methodologies are well proven and are presently employed in the cleaning of storage tanks and parts, many of these are automotive manufacturers. In the fluidized bed, parts are ...

    By BYL Environmental Services Co., Ltd. based in Langsuan Road Lumpini,, THAILAND.

  • Thermal Cleaning Services

    Before technical parts made from metal can be recovered by being remelted, in a lot of cases the dirt they carry needs to be removed first. Here too, you can rely on the services provided by the Thermo-Clean Group. Before technical parts can be melted after decommissioning, they first need to be thermally cleaned. This includes parts in high-grade ...

    By Thermo Clean Group based in Ghislenghien, BELGIUM.

  • Spare Parts Services

    Customer satisfaction has top priority at Nilfisk. To eliminate downtime, fast delivery of spare parts is necessary. Availability and fast delivery of spare parts result in more cleaning time, more facilities cleaned and a good customer experience.

    By Nilfisk Advance based in Broendby, DENMARK.

  • Low Maintenance Services

    The design and construction of the Baramy solutions result in Low Maintenance costs for the end user. This is made possible due to there being no moving parts and that the traps can be cleaned only when needed, not on a predefined schedule.

    By Baramy based in Katoomba, AUSTRALIA.

  • Rubber Removal Services

    Thermo-Clean is also in the business of removing rubber – including PU, butyl, etc. – from contaminated parts. These parts include anything from ventilator wheels and pipelines to shock absorbers. We have all the appropriate installations to handle the thermal cleaning of parts up to ten metres in length. Even if the protective rubber ...

    By Thermo Clean Group based in Ghislenghien, BELGIUM.

  • Risk Management

    As part of the Clean Air Act Amendments of 1990, the Congress directed the EPA to develop a list of at least 100 substances that, if released, could cause catastrophic effects to the public. On June 20, 1996, the EPA issued its final ruling as a part of 40 CFR, Part 68. The list includes some 70 to 100 chemicals, plus substances that are flammable ...

    By Health Consultants Inc based in Houston, TEXAS (USA).

  • Spare Parts & Accessories for Industrial Cleaning Trucks

    Our PowerUP customer support, the industries highest rated customer support program, is dedicated to making sure you always have exactly what you need. Vac-Con's over $5 million in parts inventory and our part tracking software ensures that we have all the parts you need when you need them. When we say real time we back it up with a 24/7 real ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Cryogenic Cleaning Services

    Our company is constantly involved in technology research and now we can offer an innovative cleaning service based on the practical application of cryogenics. It is a sandblasting system that uses compressed air and carbon dioxide (dry ice) pellets instead of sand and other abrasive elements. This system has many advantages, including the ...

    By Nuove Tecnologie Applicate based in Caselle Torinese, ITALY.

  • Warranty Services

    Wherever your generator sets are, our worldwide service agents and distributors can at all time provide you with the most prompt, professional, technical consultancy and services. Correct operation in accordance with operating manual, operators should also need to conduct regular inspection, adjustment and cleaning of all parts for smooth running ...

    By Tide Power Technology Co., Ltd. based in Fuzhou, CHINA.

  • Laser Cutting

    Laser cutting has been an integral part of metal fabrication at Astro for the past 20 years. We laser cut stainless steel and mild steel for OEM's, food processing equipment, auger flighting, and more. Laser cutting quickly produces quality metal parts that have a smooth and clean edge from metal sheet stock.

    By Astro Engineering & Manufacturing Inc. based in Hanover, MINNESOTA (USA). from Architectural Metals & Railings Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you