particle monitoring Services

Particulate matter (PM) is the term for a mixture of solid particles and liquid droplets found in the air. Particle contamination includes a number of measurement ranges corresponding to particle fractions including TSP particles, PM-10 breathable particles, "coarse particles" in diameters larger ...

By Environmental Resources Management (EnviroManager) Ltd. based in Yavne, ISRAEL.

Premium

Cleanroom Contamination Control Professional Services

PMS does not leave you alone and support you during the first use and the implementation of its solution. Our team of experts can help you, ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Cleanroom Contamination Control Advisors - Advisory Services Service line

Premium

Remote Services for the New Normal

The New Normal requires New Ways of Working. Particle Measuring Systems’ contamination control advisors can still assist you with many services and partner with you to get them done remotely, including: Environmental Monitoring Risk Assessment. Environmental Monitoring trend analysis. Cleaning and ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Cleanroom Contamination Control Advisors - Advisory Services Service line

Premium

SoundPLAN - Room Acoustics

Calculation of room acoustic parameters according to a sound particle model. Room acoustic descriptors (STI, EDT and measurement paths) according to VDI 2569 or ISO ...

By SoundPLAN GmbH based in Backnang, GERMANY. from Acoustics in Buildings Services Service line

Premium

Cleanroom Environmental Monitoring Systems Project Management Services

From system design to installation, commissioning and validation, Particle Measuring Systems (PMS) can guide you through a cleanroom environmental monitoring systems project from conception to completion. You can rely on our experience managing fully integrated systems worldwide serving both life ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Services and Support Service line

Premium

Service Repair and Calibration

Our service technicians are well trained to calibrate your PMS instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is performed—anywhere in the ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Services and Support Service line

Premium

Facility Monitoring Solutions

monitoring of particle counters and microbial air sampler metadata. State-of-the-art features, and custom tayolored ...

By Climet Instruments Company based in Redlands, CALIFORNIA (USA). from Climet Services Service line

Surveillance And Maintenance Services

Inspection/diagnosis, workover, well restoration. Monitoring of exploitation parameters. Physico-chemistry, particle monitoring, microbiology. Chemical ...

By GPC Instrumentation Process based in Roissy Cdg Cedex, FRANCE.

Indoor Air Quality Assessments

In addition to our proactive IAQ assessments, Hygieneering’s expert IAQ Group offers solutions to address your IAQ concerns, including: Mold & Moisture Investigations. Odor Assessments. Sick Building Issues. Flood Related Biological Testing. Airborne Particle Monitoring/Testing. Allergen ...

By Hygieneering, Inc. based in Willowbrook, ILLINOIS (USA). from Indoor Air Quality Service line

CD Formulation - Particle Size Analysis

monitoring is essential for the entire drug development and manufacturing process. Particle Size AnalysisFig.1 Particle morphology (Shekunov B Y, et al. 2007). CD Formulation can provide you with comprehensive particle size analysis services of active ingredients and excipients, and our scientists will help you to ...

By CD Formulation based in NEW YORK (USA).

Environmental Compliance Monitoring Services

Triboelectric particulate matter measurement technology is proven to be the most reliable and cost effective, and sometime the only practical technology for particle flow monitoring, and it is the USEPA-recommended particulate matter emissions monitoring ...

By Auburn Systems, LLC based in Danvers, MASSACHUSETTS (USA).

CD Formulation - Powder Flowability Test

Powder Flowability Test: In tablet production, there are many processes that require powder flow and characterizing the flow is important to ensure ease of handling. CD Formulation has many flow characterization techniques to measure the flow of powders and particles. ...

By CD Formulation based in NEW YORK (USA).

Airborne INP Counter

We are collaborating with the highly experienced research team at Colorado State University to develop an airborne version of our Continuous Flow Diffusion Chamber for measurement of ice nucleaing particles. The work has been supported by a NASA Phase I SBIR. Our initial development efforts focused on ...

By Handix Scientific LLC based in Boulder, COLORADO (USA). from In Development Service line

Remanufacturing Services

Komatsu is committed to offering factory remanufactured components which provide quality and reliability, combined with exceptional value. Using new and innovative technologies, we are committed to reducing the owning and operating (O&O) costs of your Komatsu machine by delivering high-quality and competitively priced remanufactured products. To meet this commitment, Komatsu has developed a ...

By Komatsu America Corp. based in Rolling Meadows, ILLINOIS (USA).

Onsite Services

Our Particles Plus® onsite technical and calibration services are available for field certification of critical environment particle counter and facility monitoring systems. This includes calibration and servicing of portable, handheld and remote particle counters. All certification is done in accordance with ...

By Particles Plus, Inc. based in Stoughton, MASSACHUSETTS (USA).

RubiX - Consulting Services

Our Team of experts in Air Analytics, from gas to odors, from nuisances to wellness, from laboratory to fields is at your service. We have more than 100 man years of experience in Air monitoring, experience in gas sensors, VOC & Odors, Particles analysis and Nuisances monitoring and we can help you in ...

By RubiX S & I SAS based in Toulouse, FRANCE.

Geographical Information Services (GIS)

the monitoring of sites at risk, and the management and the censuring of water resources, to the analysis and the publication on the web of discrete data gathered directly from the land, for example, the presence of polluted substances, the level of noise or of micro-dust particles picked-up by the monitoring centres ...

By S.I.A. Società Italiana per l’Ambiente S.r.l. based in Rome, ITALY.

Particle Counter Calibration Services

The Particles Plus Calibration & Service Department is dedicated to providing customers the highest quality service with meticulous attention to detail. We maintain a complete calibration lab for particle counters, air quality monitors, and temperature and humidity sensors. Calibrations are performed to ...

By Particles Plus, Inc. based in Stoughton, MASSACHUSETTS (USA).

Comminution

Welcome to the information page for comminution technology at the Fraunhofer Institute for Chemical Technology in Pfinztal-Berghausen. The fine comminution and classification of materials for initial experiments or small batches, particle-size analysis and further bulk and material ...

By Fraunhofer-Institut für Chemische Technologie ICT based in Pfinztal, GERMANY.

Services

Spectrum of Services that we Offer: We are more than just a Product Manufacturing & Exporting Company. We also offer services related to Air Filtration to businesses. Total Filter management. DOP Validation at Site. Manufacturing Facilities. Particle Count of Critical Applications. Monitoring & ...

By Global Filtration Clean Technology India Pvt. Ltd. based in Bangalore, INDIA.