Only show results in Connecticut? Ok

plastic waste services

  • Premium

    Municipal Solid Waste (MSW) Recycling Services

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Washing & Packaging

    After smashing, plastic wastes are cleaned 2-3 times at a minimum to eliminate the impurities and enhance the whiteness of final products. They are then packed in squares to produce plastics grains.

    By Guanwei Recycling Corp. based in Florham Park, NEW JERSEY (USA).

  • Raw Material Classification

    A major advantage Guanwei has over international competitors is labor cost in a labor intensive process. Guanwei currently employs around 500 workshop workers and over 150 are plastic classification veterans. Non-LDPE plastic wastes are sorted out first, representing about 8% of total raw material quantity.

    By Guanwei Recycling Corp. based in Florham Park, NEW JERSEY (USA).

  • Plastic Wood

    Plastic wood is generally wood profiles or plywood made of recycled plastic 'or virgin' and sawdust material 'or biomass' depending the quality required for the final product. There is the possibility in using mixed plastic waste or recycled plastic waste of a single product.

    By Plastic and Tires Recycling Consultants / Hikmat International Recycling FZE based in Ras Al Khaimah, UNITED ARAB EMIRATES.

  • Plastics Waste Combustion Energy Recovery

    Energy recovery refers to operations that aim to use the released energy obtained during the com-bustion of plastics waste. This energy can be used to produce heat and/or electricity for domestic or industrial use. This process should be applied to the plastic waste of bad quality which is not beneficial from an environmental and economical ...

    By European Plastics Recyclers based in Brussel, BELGIUM.

  • AQSIQ waste plastic application

    Waste plastics AQSIQ Certificate application for exporting to ChinaHi Everyone, This is Justin Xu from China Recycling Inspection Service Co.,ltd.Today i will explain how to export AQSIQ certificate for waste plastics.When we talked about waste plastics, it refers to PET,PP,PVC,LDPE,HDPE,ABS,PE,PVC etc.There are so many kinds for waste plastics, ...

    By China Recycling Inspection Service Co.,Ltd based in HangZhou, CHINA.

  • Chemical Recycling

    Chemical recycling (feedstock recycling) refers to operations that aim to chemically degrade the collected plastics waste into its monomers or other basic chemicals. The output may be reused for polymerisation into new plastics, for production of other chemicals or as an alternative fuel.Several technologies have been or are being developed by ...

    By European Plastics Recyclers based in Brussel, BELGIUM.

  • Plastics Waste Management

    Originally, plastics recycling grew alongside the plastics industry, with companies initially concen-trating on the reprocessing of production and the processing of scraps. But over the years, the re-cycling of post-consumer plastics gradually took off, with important growth being recorded in the last decade. This industry, therefore, plays a ...

    By European Plastics Recyclers based in Brussel, BELGIUM.

  • AQSIQ - how to get aqsiq registration

    how to get aqsiq registrationChina AQSIQ Certificate application Knowledge and waste plastic importers list SellingDear All, Here is Justin from China Recycling Inspection Service Co.,LtdDoes AQSIQ have any special requirements for the pictures and plans provided by application enterprise?The requirements as follow: site image file (video or ...

    By China Recycling Inspection Service Co.,Ltd based in HangZhou, CHINA.

  • Electro Plastic Waste Minimization

    To keep the soak bath consistently clean by removing oil & sludge continuously while extending bath life to more than 18 months. Since oil removal is total defects are reduced by more than 80%, You can make a poor coating perform with excellent pretreatment, but..... You can't make an excellent coating perform with poor pretreatment, More than ...

    By Enviro Energy Systems based in Vananthurai, INDIA.

  • Plastic AQSIq - export Ldpe plastic to China Aqsiq application

    export Ldpe plastic to China Aqsiq applicationAs we all know, Waste and scrap Plastic overseas suppliers have to get AQSIQ Certificate, then can export waste plastic(PET/PE/PVC/HDPE/LDPE/ABS/PA/PP etc) to China.Suppliers should use your AQSIQ license to do CCIC pre shipment inspection, only your scrap plastic meet China GB16487.12 standards,it can ...

    By China Recycling Inspection Service Co.,Ltd based in HangZhou, CHINA.

  • Recycling Service

    Is plastic waste recycling profitable business? The problem of plastic waste utilization increases each year. A vast number of domestic solid wastes are plastic wastes. Our country is short of recycling plants. Existed enterprises work in two or three shifts but still are not successful. Plastic recycling is done as by large plants so and by small ...

    By Nazarov Systems Recycling Equipment based in Sochi, RUSSIA.

  • Plastic Recycling Services

    Plastic/Pure Water Sachet Recycling Technology: This Technology present the best form of managing Plastic waste products (PP, PE & PET etc) including pure water sachets that typified the entire Nigerian landscape into pelletised plastic resin which is used in several application for the production new plastic products like shopping bags, waste ...

    By Richbol Environmental Services Ltd. based in Ikeja, NIGERIA.

  • Grinding (Shredding)

    Our recycling facilities enable us to handle plastic waste of all forms and sizes from post production, post industrial and post consumer use. Where sorted materials are size reduced in to small pieces using high capacity crushers that are able to crush lumps up to 125cm diameter.

    By Middle East Waste Management Limited (MWM Ltd.) based in Jeddah, SAUDI ARABIA.

  • Plastic Recycling Services

    Are you a business with commercial plastic waste (e.g. baled plastic film or rigid plastic crates), production scraps or redundant stock? Recycling in Action Ltd are established UK traders of waste recyclable materials. Our main expertise is in the handling of baled LDPE film and various rigid plastics such as HDPE, PS, PP and ABS.

    By Comply Direct Ltd based in Skipton, UNITED KINGDOM. from Materials Service line

  • Confidential Plastics Waste Recycling Services

    This highly confidential service effectively manages the disposal of sensitive items such as obsolete or damaged stock or counterfeit goods, for example. At Luxus we know that the security of these items is critical to prevent them finding their way to unscrupulous dealers who may wish to reuse or sell these items.

    By Luxus Ltd based in Louth, UNITED KINGDOM. from Recycling Services Service line

  • Biodegradability Services

    The challenge: reinvent the lifecycle of plastics. The “natural” process of degradation for fossil hard plastic matter takes between 200 and 400 years. At best, plastic waste is incinerated, even buried in landfills in certain countries with all the environmental consequences that it implies. Add to that the gradual depletion of fossil ...

    By CARBIOS based in Paris, ITALY. from Bioprocesses Service line

  • Packaging Waste Recycling Services

    Our ‘closed loop’ recycling service provides a solution for logistics companies that want to responsibly manage their waste packaging plastics problem. We can either purchase the old plastics packaging waste from you or we can re-engineer the material to the highest standards for remanufacture by you back into the same product.

    By Luxus Ltd based in Louth, UNITED KINGDOM. from Recycling Services Service line

  • Systems Integration Services

    Polymer Recovery Systems not only provides specific plastic waste processing components to customers in the recycling business, we also provide the technology and equipment to allow these components to function together as one system. From a single control panel, a customer may operate a complete system and perform a variety of tasks – from ...

    By Polymer Recovery Systems, Inc. (PRSI) based in Eau Claire, WISCONSIN (USA).

  • Waste Plastic

    We offer solutions for both post-industrial and post-consumer waste plastic streams. We deal with mainly in scrap plastics, regrind and pellets.

    By Cellpap B.V. based in Haarlem, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you