Only show results in Virginia? Ok

produced water test services

  • Premium

    Pilot Test with WesTech

    Piloting is a great way to study the treatability of raw water, determine operating parameters, and optimize an efficient full-scale process design. With WesTech's variety of pilot plants available, we can help you test a single process or a complete multi-step process.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    In-House Environmental Services & Emissions Testing Services

    Measurement of emissions is necessary to ensure compliance with facility construction and operating permits as well as the underlying regulatory requirements. It can also be carried out for performance set-up purposes or to produce baseline or evaluation data. We are a recognized leader in providing state-of-the-art testing services for emissions ...

    By AEREON based in Austin, TEXAS (USA).

  • Produced Water Treatment Services

    A continuous, reliable and robust source of water is essential to maximizing the production of non-conventional oil & gas extraction. The challenges of this industry are significant – safety, remoteness, extremes of temperature and weather and high operational costs due to difficult logistics amongst other factors. IDE’s solutions ...

    By IDE Technologies based in Kadima, ISRAEL. from Produced Water Treatment Services Service line

  • Drinking water testing

    The recommended guideline maximum of 500 mg/L is based on taste. Generally water with less than 500 mg/L is regarded as good quality water but values of up to 1000 mg/L can be tolerated. Corrosion may also become a problem with high TDS levels. There are no health effects associated with high TDS but the components which make up the TDS may cause ...

    By MPL Health Safety Environment based in AUSTRALIA.

  • MFD Produced Water Treatment Services

    This is the cutting-edge technology for the treatment of oilfield produced waters. The Micro-encapsulating Flocculating Dispersion or MFD is a non-toxic, food grade chemical that encapsulates the oils, fats and suspended solids in water. Tests conducted in the oilfields in Canada and United States indicate that MFD can reduce hydrocarbons in ...

    By ERIN Consulting Ltd. based in Regina, SASKATCHEWAN (CANADA).

  • Aquatic Testing/Chemical Testing/ Storm water Testing Service

    The scientists at Pacific EcoRisk are knowledgeable and experienced in the performance of the entire spectrum of aquatic testing, including acute and chronic toxicity tests, and have performed literally thousands of aquatic toxicity tests using freshwater, estuarine and marine species. This testing has been performed in support of client NPDES ...

    By Pacific EcoRisk based in Fairfield, CALIFORNIA (USA). from Aquatic Testing/Chemical Testing/ Storm water Testing Service Service line

  • Approval & Test

    Various modules and fibers, IMT produces are certified by different institutes. Our products have a full approval in the core markets of Germany and Russia and comply with regulations on drinking water treatment in the various regions.

    By Innovative Membrane Technologies Solutions B.V. (IMT ) based in Zeewolde, NETHERLANDS.

  • Water Testing Laboratory Services

    The water testing laboratory services available at Chemtech Environmental are applicable to our FIVE day standard turnaround, with the option of faster results from the water testing lab at a premium. You are assured of quality and validity by using our accredited water testing laboratory to UKAS ISO17025.

    By Chemtech Environmental Ltd based in Consett, UNITED KINGDOM.

  • Water Interdependency Stress Tests

    In a world that can no longer take ample, secured and not contaminated supplies of water for granted, we need to take into account: Water volume: flood occurrence, water scarcity, upstream storage, etc. Water quality: temperature, contamination, etc. Water infrastructures: finance, management, safety, etc. Water//Security nexus. Water//Energy ...

    By Prana Sustainable Water based in Gland, SWITZERLAND.

  • Analytical Testing

    Adirondack's analytical service chemists and materials scientists have over 28 years experience in analyzing organic and inorganic compounds taken from a wide variety of media, including air, soil, wastewater, groundwater, hazardous waste and drinking water. Our laboratory is capable of providing EPA Contract Laboratory Protocol (CLP) and ...

    By Adirondack Environmental Services Inc. based in Albany, NEW YORK (USA).

  • Testing Services

    Unlike field testing, researchers using Ohmsett's facilities are able to control test conditions. Our large test tank enables can accommodate full-size equipment. Therefore, testing at Ohmsett produces more accurate and reliable results while avoiding the need for scale models. And, unlike tests that use popcorn, oranges, or other biodegradable ...

    By OHMSETT based in Leonardo, NEW JERSEY (USA).

  • Laboratory Tests

    At the Hamburg location, ULTRAWAVES has set up its own laboratory to satisfy specific requirements of its customers. As a result, we are able to provide you with reliable information on the effect of our high-power ultrasound systems on aqueous suspensions (e.g. biomass, sludge) or other feasible applications in industry. This usually requires a ...

    By Ultrawaves Wasser & Umwelttechnologien GmbH based in Hamburg, GERMANY.

  • Production Fluid Testing Services

    Gas sampling. Condensate sampling. LPG sampling. NGL sampling. Oil sampling. Produced water sampling.

    By Nor-Alta Environmental Services based in Edmonton, ALBERTA (CANADA).

  • Multiphase Test Rigs

    NEL Multiphase Flow Facility: The National Standard multiphase flow measurement facility at NEL has been fundamental to developing knowledge and capability that has allowed industry to produce and measure oil, water and gas from marginal reserves in remote and inhospitable environments.

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase Test Rigs Service line

  • Tightness Test Services

    As counting accuracy of the actual water meter is fundamental (every drop is important) it must be regularly checked for functionality, safety working as well as watertight integrity. The manufacturing process of MFB foresees for all the produced water meter bodies, where required, a test of 100% tightness in order to guarantee the ...

    By MFB di Bonomi Eliseo & C. snc based in Lumezzane, ITALY.

  • Bituminous Materials Testing

    Bituminous road surfacing materials are produced by mixing mineral aggregate with a bitumen binder in predetermined quantities and within defined temperature ranges. Other materials are sometimes added to the mixture, including fibres, polymers and pigments to produce specific performance characteristics.

    By ACS Environmental Testing Ltd. based in Poole, UNITED KINGDOM.

  • Water Reuse

    Hydroitalia – Colsen provides wastewater treatment applications to purify water produced from different industrial processes, in order to reach the required final quality standard for the discharge or its reuse. The definition of the correct wastewater treatment solution depends on the input process water specification and the final ...

    By Hydroitalia - Colsen Srl based in Medicina, ITALY. from Water Reuse Service line

  • Pilot Testing Services

    Veolia Water Technologies has the capability to validate performance and optimize design by pilot testing many of our proprietary processes. Our mobile pilot treatment units are brought to the site and operated by experienced personnel under a range of conditions to ensure the best technological solution for specific water ...

    By Veolia Water Technologies North America based in Plainfield, ILLINOIS (USA).

  • Test Lab Services

    The first question that we are often asked is why a laboratory. The answer is quite simple — so we can do things properly. With an international customer base and the knowledge that all water sources are different, it is imperative that we have data on water before recommending products.

    By Dime Water based in Vista, CALIFORNIA (USA).

  • Cleanliness Testing Services

    Contamination removal from components used in automotive, aerospace, hydraulics and production systems is becoming increasingly important as suppliers, producers and end users look for better reliability and longer warranty periods. Particle Technology can provide either the equipment or the analysis service you require for the determination of ...

    By Particle Technology Limited based in Hatton, UNITED KINGDOM. from Cleanliness Testing Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you