Only show results available in Virginia? Ok

Roughness Measurement services

  • Screening Services

    The first step of each wind energy project is the regional wind potential study to identify suitable sites. Free available sources such as wind atlases, meteorological stations data and reanalysis data as well as our own measurements and wind measurements undertaken by third parties are evaluated in this project phase. In addition, surface ...

    By SoWiTec Group based in Sonnenbuehl, GERMANY. from Wind Measurements and Surveys Service line

  • Measurements Services

    Any optimisation work on industrial operations generally starts with an evaluation of the current situation and ends with a similar evaluation of the improved mode of operation. This often includes special measurements to deliver the necessary information on the equipment and systems, the process and the products. We offer a large variety of ...

    By VDEh-Betriebsforschungsinstitut GmbH based in Düsseldorf, GERMANY.

  • Premium

    On-Site Pyrometer Maintenance Solutions

    Your brand-new pyrometers are precisely calibrated at the factory, which is documented with a corresponding certificate. Like every high-precision measuring instrument, pyrometers should be checked on a regular basis to ensure accurate long term measurement results.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

  • SMHI - Erosion Of Riverbanks and Bottom Sediment

    SMHI's expertise in water dynamics identifies erosion areas in watercourses, lakes and along the coast, with the help of advanced numerical models or rough calculations, all based on the client's needs and requirements regarding accuracy.

    By SMHI International Consulting Services based in Norrköping, SWEDEN. from Environment Service line

  • Erosion Control

    FAST-TEK develops erosion control plans and implements erosion mitigation measures, as by evaluating existing surface water drainage, mapping of vegetation, development, rock outcrops and surface soils. Techniques include stormwater and sediment detention basins, as well as increasing the roughness coefficient on existing drainage systems to ...

    By FAST-TEK Engineering Support Services based in Pt. Richmond, CALIFORNIA (USA).

  • Real Time PCR

    Real-time PCR is an extremely sensitive and reproducible method to measure levels of gene expression in an organism. Indirectly, the expression of particular genes may be assessed with microarray technology, which can provide a rough measure of the cellular concentration of different messenger RNAs; often thousands at a time. While the name of ...

    By EcoArray, Inc based in Alachua, FLORIDA (USA).

  • Treatability Studies Services

    Chitosan is an amazing polymer, that has the ability to flocculate most suspended sediments from various types of water. When you send a water or a sediment sample to Dungeness Environmental, we will evaluate the ability of our products to work in your situation. With water samples, we take measurements for conductivity, pH, and turbidity. After ...

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

  • ROV Insurance (AUV)

    ROV insurance covers your specialized machines in a rough environment. A remotely operated underwater vehicle, commonly referred to as an ROV, is a tethered underwater vehicle. ROV insurance covers this specialized crafts.  They are common in deep water industries such as offshore hydrocarbon extraction, commercial diving contractors, ...

    By John W. Fisk Company based in New Orleans, LOUISIANA (USA). from Marine Coverages Service line

  • Engineering Service

    Development processes for individual actuator systems are often preceded by rough sketches. As a matter of fact, these first outlines are the product of intensive communication and exchange between you, the customer, and ourselves. Your specific requirements are already intertwined with our expertise and many years of experience. At this phase, we ...

    By AUMA Riester GmbH & Co. KG based in Muellheim, GERMANY.

  • Test Procedures and Documentation Services

    Various testing procedures are executed directly in-house and documented according to your requirements.

    By Sommer & Strassburger GmbH & Co. KG based in Bretten - Gölshausen, GERMANY.

  • Technical Assistance

    We also provide engineering services such as 2D Drawing, 3D Modeling, Rapid Prototyping, Tool and Fixture Designing. CALMET’s end-to-end processes are very extensive. Experienced engineering professionals achieve the desired technical design, while our foundries handle molding, coring, melting & refining, heat treatments, quenching, ...

    By Calmet based in Wilmington, DELAWARE (USA).

  • Dimensional Calibration Services

    Exova METECH provides traceable and accredited calibration of dimensional measuring equipment and instruments. We are vendor independent and able to support all manufacturers and instrument types.

    By Exova Group plc based in Burlington, ONTARIO (CANADA). from Calibration Services Service line

  • Dynamic Balancing Services

    When unbalance has been identified with the help of FFT vibration analyzer, then the correction is straightforward. Weight has to be either added or removed from the rotating equipment. Unbalance is measured and reported in two ways. One is a measure of the effect of the vibration and the other is a measure of the heavy spot. The vibration measure ...

    By Onyx Dynamic Balancing Services based in New Delhi, INDIA.

  • Well Logging & Geophysical Survey Dept

    Technology Experts Company has undertaken massive groundwater assessment, monitoring, natural radiation measurement and mitigation. One of the main frameworks of the groundwater and underlying strata assessment is the geophysical well logging field acquisition- with ten borehole sondes measuring over thirty parameters, including the visual ...

    By Technology Experts Co. based in Riyadh, SAUDI ARABIA.

  • Pharmaceutical & Medical Devices

    Atlanta-based MVA Scientific Consultants provides analytical testing services to the pharmaceutical and medical device industries. We have a reputation for high quality services and data integrity and we will stand behind our work in the event of litigation.

    By MVA Scientific Consultants based in Duluth, GEORGIA (US) (USA).

  • Materials Laboratory Services

    The VGB Materials Laboratory now has over 30 years’ experience in the field of damage analysis and condition assessment of power plant components, and in practically oriented research and development in the field of materials technology. We perform the associated work both on site with our customers and in our state of the art in-house ...

    By VGB PowerTech e. V. based in Essen, GERMANY. from Technical Services Service line

  • Clean Room Treatment Services

    Stainless steel components and tubes used sensitive pharmaceutical areas and in high purity gas systems require extreme clean surface conditions. The fully automatic monitoring of pressure level, temperature, moisture and particle assures highest production quality.

    By HENKEL Beiz- und Elektropoliertechnik GmbH & Co. KG based in Waidhofen/Thaya, GERMANY.

  • Repairs and Calibration Services

    Simply ship us your broken gages to attention: “Repair Department”. Let us respond with a free estimate of repair versus a discounted price for new. A2LA ISO 17025 Calibration to NIST of repaired gage also is available upon request. (Please make note with you gage shipment if this is required).

    By Willrich Precision Instrument Company, Inc based in Cresskill, NEW JERSEY (USA).

  • Wafer Reclaim Services

    SVM provides all levels of wafer reclaim from a technically advanced low particle, super flat reclaim to the simplest strip and polish producing handling grade wafers with a clear polished surface.   Wafers which flow through SVM advanced reclaim programs successfully characterize 45nm particles and site flatness at 0.13um.

    By Silicon Valley Microelectronics, Inc. (SVM) based in Santa Clara, CALIFORNIA (USA). from Wafer Services Service line

  • Mechanical Polishing Services

    Mechanical polishing is the smoothing of a surface using mechanical tools and abrasives. Mechanical polishing is performed in steps with progressively finer abrasives until a desired smoothness is achieved. The precision polishing process removes material and plastically deforms the surface while it alters the macroscopic and microscopic surface ...

    By Harrison Electropolishing L.P. based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you