Only show results in Virginia? Ok

Sample Preparation Instrumentation services

  • Preparation Of Powder Sample

    Set up of an analytical programme or verification of instrument calibration software can be handled professionally and with confidence in analytical results by means of internationally accepted Certified Reference Materials. However, the costs of some 20 CRMs as control samples to cover a wider range of different materials is relatively high. The ...

    By LGC Standards GmbH based in Wesel, GERMANY.

  • Metallurgical Sample Preparation Services

    Before sample preparation begins, samples are placed in order of priority. Samples are then jaw and cone crushed to approximately 10 mesh. Sample is then split down to about 250g and ring pulverized to 140 mesh. The rejected portion of sample is returned to the original sample bag, saved and returned to the client. Barren rock is run through the ...

    By American Analytical Services, Inc. based in Osburn, IDAHO (USA).

  • Sample Protocol & Receiving Services

    American Analytical Services, Inc. has a standard operating procedure (SOP) for all aspects of sample drop off, drying and preparation, digestion, instrument analysis, quality control assurance and computerized data reporting.Beginning with the prearranged schedule for sample shipments, AAS will insure a representative will be present to receive ...

    By American Analytical Services, Inc. based in Osburn, IDAHO (USA).

  • Air Quality Sampling Services

    Facilitating Compliance And Maximizing Performance Demonstrating compliance with air permit requirements could mean the difference in key operational efficiencies. NTH Consultants brings thorough knowledge of stack sampling protocols and permitting strategies that can facilitate compliance and maximize your facility’s performance.

    By NTH Consultants, LTD. based in Cleveland, OHIO (USA). from Environmental Services Service line

  • Engineered Services

    PPM specialises in the integration of instrumentation, building pre-assembled wallboards and walk-in analyser kiosks. Duty and standby pumping systems, sample preparation, data transfer, collection and display can all be provided by a single company.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Soil Laboratory Testing Services

    Sample preparation; Tuninetti’s hydraulic jack for undisturbed samples, max press. 250 bar. Controls’ electric agitator. Controls’ damp room. granulometric and physical properties.

    By GD TEST srl based in Torino, ITALY. from Equipments Services Service line

  • Soil Laboratory Testing Services

    Sample preparation; Tuninetti’s hydraulic jack for undisturbed samples, max press. 250 bar. Controls’ electric agitator. Controls’ damp room. granulometric and physical properties.

    By GD TEST srl based in Torino, ITALY. from Equipments Services Service line

  • Laboratories Services

    The Materials Testing Department is housed in RESPEC's corporate headquarters located in Rapid City, South Dakota. More than one-third of the 30,000-square-foot headquarters building has been designed especially for rock testing, sample handling, and storage. Three laboratories comprise the department and are supported by separate shop facilities ...

    By RESPEC based in Rapid City, SOUTH DAKOTA (USA). from Mining & Energy Service line

  • Environmental Air Analysis

    If you need to know what’s in the air, indoors or out, this solution provides rapid and accurate analysis of VOCs in air samples. Whole air can be sampled directly into the instrument, or can be sampled from bags or canisters. Analysis is performed by a Voice Series instrument, which can be lab-based or vehicle mounted. We provide turnkey ...

    By Syft Technologies Ltd based in Christchurch, NEW ZEALAND.

  • Premium

    Spectroquant- Analytical Quality Assurance

    Today analytical quality assurance (AQA) is a decisive factor in wastewater analysis. Only quality assurance measures that check your processes from start to finish ensure that your findings ultimately count as secure, reproducible, reliable and recognized analytical results. Our Spectroquant® analysis system and the components that make up ...

    By Merck based in Darmstadt, GERMANY.

  • Feasibility Studies

    Because Ocean Optics has over 1200 products from which to choose the right product configuration for your application, we wish to alleviate any concern over optimizing the perfect system and protecting your instrumentation investment by offering feasibility studies services. With this new service, our Applications Scientists will run your samples ...

    By Ocean Optics - a Halma Company based in Dunedin, FLORIDA (USA).

  • Services

    Sample Collection and Treatability Studies. Feasibility Studies and Report Preparation. On-Site D. A. F. Pilot Plant Demonstration for actual wastewater. Environmental Impact ssessment Studies. Consultancy in all related pollution problems. Turnkey Project involving following: Detailed Design of the scheme, equipments. Total Engineering Activities ...

    By Nirmal Engineers based in Mumbai, INDIA.

  • Light Obscuration Photozone Services

    Light Obscuration, also referred to as Photozone and Single Particle Optical Sensing (SPOS), is an analytical technique of high resolution capable of detecting a small percentage of outliers. It can also be used to obtain an overall size distribution, when operated with proper technique. An important consideration when choosing Light Obscuration ...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA). from Particle Size Distribution Analyses Service line

  • Laboratory Support

    MVA Scientific Consultants specializes in non-routine and customized analytical testing services. Our testing services typically help clients answer: Where did the contamination come from? What is this unknown material? What is the root cause for this product failure? What is the composition of this product? We understand that many laboratories ...

    By MVA Scientific Consultants based in Duluth, GEORGIA (US) (USA).

  • Analytical Services

    Polymer Char offers a wide range of Analytical Services for Polyolefin samples in its Laboratories in Valencia. Polymer Char’s Laboratories are a global reference in the Polyolefin Characterization field since the most complete range of instruments and techniques for microstructural characterization are available; Molar Mass by high ...

    By Polymer Characterization, S.A based in Valencia, SPAIN.

  • Technology Experts Laboratories Services

    Technology Experts Labs offer distinguished services in the fields of Radiation and Chemical analysis for different kinds of samples. Our labs are equipped with advanced instruments and devices to perform the required tests from well known International Companies such as: Canberra Industries Inc, (USA) which is specialized in production and ...

    By Technology Experts Co. based in Riyadh, SAUDI ARABIA.

  • Heavy Metals Analysis

    On-site heavy metals analysis is accomplished using a technique called X-ray Fluorescence (XRF). There are a number of XRF instruments available but QROS uses XRF analysers from Oxford Instruments. X-ray Fluorescence (XRF) instruments work by exposing a sample to be measured to a beam of X-rays.  The atoms of the sample absorb some of this ...

    By QROS Limited based in Hayling Island, Portmouth, UNITED KINGDOM.

  • Field Analyses Services

    The mobile equipment for on field analyses of matrices investigated in the environmental projects (mainly soils, and secondly water) is constituted by analytical instrumentation and sampling equipment hosted in van vehicles. They can operate autonomously also in areas not connected to the electric network thanks to power generators.

    By Theolab SpA based in Volpiano, ITALY.

  • Quality Control Procedures Services

    Calibration of instrumentation is done daily before analysis is carried out and then checked with control standards. Analytical working standards are those made from approved stock standards traceable to the National Bureau of Standards (NIST) and purchased from a reputable vendor. A logbook will be kept detailing the preparation of these ...

    By American Analytical Services, Inc. based in Osburn, IDAHO (USA).

  • Industrial Hygiene - OSHA Compliance Monitoring Services

    AET's Industrial Hygienists will assist your staff to develop a comprehensive monitoring program tailored to fit your needs.  If worker exposure is an issue, AET will provide your staff with personal monitors to determine the level of exposure in the work place.  AET can also provide electronic direct reading instrumentation to determine ...

    By Accredited Environmental Technologies, Inc. based in Media, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you