Only show results in Connecticut? Ok

sampling liner services

  • Dual Tube Technology

    Our Dual Tube Sampling System is an efficient method of collecting soil cores with the added benefit of a cased borehole. Dual tube sampling uses two sets of probe rods to collect continuous soil cores or discrete samples. One set of rods is driven into the ground as an outer casing. These rods receive the driving force from the hammer and provide ...

    By Millennium Environmental based in Anaheim, CALIFORNIA (USA).

  • Geotechnical Logging and Sampling

    Geotechnical work is carried out in accordance with the customer's specifications and typically includes sampling and testing in accordance with the current guidance in BS5930, or a bespoke method to suit specific circumstances. Delta-Simons Drilling team has adopted field quality procedures for corrected SPTs, and taking relevant undisturbed ...

    By Delta-Simons Environmental Consultants Ltd based in Lincoln, UNITED KINGDOM.

  • Mine Tailings Sampling Service

    Our crews use the Pionjar 120 System to sample mine tailings and sediments using AQ or BQ-sized sampling tools. Unconsolidated tailings, sediments, and sludges can be retrieved in a clear lexan liner for easy sample logging, storage and transport.

    By Sonic Soil Sampling Inc. based in Concord, ONTARIO (CANADA).

  • Drilling Waste Management Services

    Landspray While Drilling (LWD). Disposal on Forested Public Lands (DFPL). Sump Suitability Assessments. Sump Liner Installation. Drilling Waste Sampling, Analyses, and Directive 050 Disposal Plan Generation. Mix-Bury-Cover Supervision. Landspread Supervision. Pump-off Disposal (Clear Fluids Disposal). Toxic Sump Treatment. Advanced Drilling Fluids ...

    By Nor-Alta Environmental Services based in Edmonton, ALBERTA (CANADA).

  • Manufacturing Services

    Applied Felts is a 100% vertically integrated liner manufacturer, which guarantees that every phase of manufacturing – from the purchase of raw fiber to the coating and development of our liners – is done in one location, giving us impeccable precision and control over the quality products we make. Our innovative liners are subjected ...

    By Applied Felts Inc. based in Martinsville, VIRGINIA (USA).

  • Percussive Drilling

    Percussive Drilling is a cost effective, simple and largely spoil free method of conducting shallow Geo-Environmental site investigations in unconsolidated ground. It is particularly suited to limited access contaminated sites where flushing and spoil disposal might prove contentious.

    By Ecologia based in Sittingbourne, UNITED KINGDOM. from Drilling Services Service line

  • Window and Windowless Sampling

    Percussive window or windowless sampling involves driving cylindrical steel tubes into the ground using a high frequency percussive hammer. Usually the hammer is driven by a hydraulic power pack, but electric and pneumatic hammers are also available to suit particular site conditions. The drilling rig is normally track or crawler mounted and some ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Sediment Vibracoring Services

    Aqua Survey owns and operates more than ten heavy duty vibracoring systems. Vibracoring is considered to be the most cost effective technology to collect large numbers of sediment cores efficiently and with little distortion to the actual core. Three or four inch diameter cores can be collected continuously to a depth of about 40 feet.

    By Aqua Survey, Inc. based in Flemington, NEW JERSEY (USA). from Sediment Sampling Service line

  • DPT Services

    Our DPT services are based on our fleet of DPT rigs consisting of genuine Geoprobe 6610DT and 6620DT track mounted rigs. These rigs are equipped with state of the art hammers, liner extruders, auger motors, and a full compliment of sampling tools.

    By Bear Environmental Services, Inc. based in Juliette, GEORGIA (US) (USA).

  • Rotary Core Drilling

    The rotary drilling technique is normally used for forming a deep observation borehole or for obtaining representative samples of rock which could not be recovered using conventional light cable percussion drilling methods. Powered rotary cutting tools use a cutter head on the end of a shaft, which is driven into the ground as it rotates. The ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Horizontal-Directional Sampling for Environmental and Geotechnical Studies

    Horizontal Directional Drilling (HDD) provides a viable means to collect environmental samples from locations that are inaccessible to vertical drill rigs, direct-push methods, or sonic methods, due to surface infrastructure or natural barriers. Using directional drilling techniques, DTD can collect samples from locations that are hundreds of ...

    By Directed Technologies Drilling Incorporated (DTD) based in Bremerton, WASHINGTON (USA).

  • Phase 2 Investigation

    Ground investigation involves the inspection of soils and rock layers by the excavation or trial pits and/or the drilling of boreholes.  Different techniques are applicable to different geology and site conditions.  The soils and rocks encountered are inspected by a supervising Geo-Environmental Consultant to provide a detailed ...

    By BRD Environmental Ltd based in Banbury, UNITED KINGDOM. from Site Investigation Service line

  • Geotechnical Capabilities

    Ecologia are pleased to offer our clients a comprehensive range of in-situ geotechnical testing and field sampling techniques, conducted using our fleet of in-house drilling rigs and ancillary equipment. We understand that good data and quality samples are essential in the production of an accurate site model. All of our drilling staff are trained ...

    By Ecologia based in Sittingbourne, UNITED KINGDOM. from Drilling Services Service line

  • Rotary Drilling

    Rotary Drilling is the backbone technique of intrusive SI work, the extractive minerals industry and civil engineering.

    By Ecologia based in Sittingbourne, UNITED KINGDOM. from Drilling Services Service line

  • Continuous Core Soil Sampling

    Johnson Probing uses two primary Direct Push Technology (DPT) sampling methods that allow for the collection of continuous soil samples: Macro-Core Sampler – This sampler is used primarily for continuous core and discrete depth soil sampling. The sampler consists of a cylindrical steel tube that is 4-5 feet in length and 2 inches (OD) in ...

    By JOHNSON Probing, LLC based in Batavia, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you