sampling service services in Quebec

  • Stack Sampling Services

    Consulair has extensive experience regarding source emissions testing. Whether it is for environmental compliance audits or technical assessments of systems and processes, Consulair can provide testing for the following parameters:

    By Consulair based in Quebec, QUEBEC (CANADA).

  • Olfactometry / Odour Sampling Services

    For nearly 20 years, Odotech is offering olfactometry services to evaluate one or more odour sources. Each of Odotech's subsidiary in Canada, France and Chile has its own olfactometer and technicians trained to sample odours at industrial site such as wastewater treatment plants, composting sites, food processing factories, hog farms and many ...

    By Odotech - an Envirosuite Company based in Montreal, QUEBEC (CANADA).

  • Audit, Maintenance And Calibration Of Gas Sampling Equipment Services

    Consulair offers audit, maintenance and calibration services for gas analysers, high volume samplers and mass particle analysers such as the TEOM 1400A, Partisol and Dichotomous.

    By Consulair based in Quebec, QUEBEC (CANADA).

  • Diagnosis Services

    Based on the elements detected in the audit, Odotech’s experts can perform a diagnosis of atmospheric contaminants from the samples collected on site. For odours, emissions are identified from samples taken directly at the source. Sampling of odours must use a recognized method adapted to the type of source involved. The experts then must ...

    By Odotech - an Envirosuite Company based in Montreal, QUEBEC (CANADA).

  • Laboratory Services

    Poseidon’s laboratory services are available for testing customers’ water samples in order to determine the feasibility of the application and to simulate the expected results of full scale Poseidon equipment.

    By Poseidon Inc based in Outremont, QUEBEC (CANADA).

  • Air Quality, Noise and Vibration Characterization Service

    The increase in atmospheric emissions from industrial and human sources has led to ever-increasing atmospheric pollutant levels. SNC-Lavalin Inc., Environment Division (SLE) has maintained a close working relationship with the public and the industrial sectors, helping it to acquire sound expertise in air quality. For the past 20 years, SLE has ...

    By SNC-Lavalin based in Montreal, QUEBEC (CANADA). from Air Quality, Noise and Vibration Characterization Service Service line

  • Lab Testing Service

    Fully equipped lab allows rapid sludge sample results. The sludge characteristics and its dewatering potential are evaluated in our laboratory by qualified technicians.

    By Fournier Industries Inc. based in Thetford Mines, QUEBEC (CANADA).

  • Ecological Services and Permitting

    FRANZ ENVIRONMENTAL INC. provides Ecological Services and Permitting Support to developers of Brownfields and Greenfields, mining companies, municipalities, provincial and federal agencies and industrial clients. FRANZ’s ecologists and biologists are qualified in wetland evaluation, ecological land classification (ELC), fisheries assessment ...

    By Franz Environmental Inc. Office in Longueuil, QUEBEC (CANADA).

  • Unequalled Customer Service

    Highly-qualified employees to answer any question you may have regarding the chemical or physical treatment of your waste.Each customer is paired with a Senior Account Manager and a Customer Service Representative.Pick-up of your samples by our Senior Account Manager.Transportation of your waste by road or rail from your plant to Stablex by our ...

    By Stablex Canada inc. based in Blainville, QUEBEC (CANADA).

  • State-Of-The-Art Treatment Process Service

    All wastes are chemically pre-treated and stabilized to produce a non-leachable concrete-like material.Acceptance of a wide range of inorganic wastes and contaminated soils with permissible organic content.Thorough sampling of incoming waste.Full-service on-site laboratory.Specialized processing of hard-to-treat materials, such as cyanides, ...

    By Stablex Canada inc. based in Blainville, QUEBEC (CANADA).

  • Media Core Sampling Services

    A core sample is a physical measurement of the depth of each layer of media in your system to determine media depletion, if any, resulting from ordinary backwash cycles, water chemistry, and/or water quality.

    By Filtronics, Incorporated Distributor in St.-Urbain Premier, QUEBEC (CANADA).

  • Media Sampling & Analysis Services

    Bacterial Enumeration, Microbial Specification, Nutrient Profile, Salts & Minerals, Particle Size & Distribution, Surface Area.

    By Biorem Technologies Inc. Distributor in QUEBEC (CANADA).

  • Calibration Services

    In order to achieve quantitative measurement output (mg/m3) from PCME sensors and to ensure optimum performance from PCME's Particulate Monitoring Systems, it is necessary that the unit is calibrated against the results from the standard reference method (SRM), via isokinetic sampling.

    By PCME Ltd - part of the Environnement S.A Group Distributor in Montreal, QUEBEC (CANADA). from Calibration Services Service line

  • Alarm Setting Services

    Alarm Setting Services are for plant operators using Dust Gross Filter Failure Detectors. To ensure these instruments deliver maximum benefit, it is important that the alarms are configured to the optimum level for the process-specific conditions. PCME offer two categories of Alarm Setting Service for Dust Gross Filter Failure Detectors: Alarm ...

    By PCME Ltd - part of the Environnement S.A Group Distributor in Montreal, QUEBEC (CANADA). from Alarm Setting Services Service line

  • Annual Calibration Services

    PCME has extensive experience assisting operators to meet their compliance monitoring requirements, where understanding that calibration is not simply an isokinetic test is the key to success. Two categories of service are offered for the calibration of Particulate Measurement Systems: Annual Calibration Assist (which does not include isokinetic ...

    By PCME Ltd - part of the Environnement S.A Group Distributor in Montreal, QUEBEC (CANADA). from Annual Calibration Services Service line

  • System Design Services

    SSI is a full service diffuser manufacturer and technical partner. We have significant technical capabilities including 2D and 3D drafting, biological simulation with Biowin™ software, CFD mixing simulation, FEM analysis of severe duty applications, Seismic calculations, buoyancy calculations, heat transfer calculations, and benchmarking. We ...

    By SSI Aeration, Inc. Distributor in Saint-Lambert, QUEBEC (CANADA). from System Design Services Service line

  • Cleanroom Monitoring Services

    A common approach to controlling contamination in high technology manufacturing cleanrooms is the continuous monitoring of particles. Either dedicated, discrete, “real-time” particle counters or a multi-port pneumatic manifold system to sample multiple locations throughout the cleanroom can be used to accomplish this goal.

    By Lighthouse Worldwide Solutions Distributor in St. Laurent, QUEBEC (CANADA). from Cleanroom Monitoring Services Service line

  • Filter Weighing Services

    In addition to supplying consumables and accessories for sampler use, Airmetrics offers a 47mm Filter Weighing Service to complement use of the MiniVol TAS and other types of air sampling equipment. We carry three types of filters (Fiber Film, Pure Quartz, and Pure Teflon; others may be special ordered).

    By Airmetrics Distributor in Montreal, QUEBEC (CANADA).

  • Pilot Study Services

    Filtronics “full scale” pilot units provide long term, real time field tests to collect data and document the treatability of the water source. In addition, the pilot test will verify the chemical oxidation demand, determine the chemical feed rates, electrical operating costs, and document the removal efficiencies. All tested water ...

    By Filtronics, Incorporated Distributor in St.-Urbain Premier, QUEBEC (CANADA).

  • Biological Processes & Testing Services

    Media Sampling & Analyses. Biotrickling Filter Biofilm Health. PH Levels. Salt/Mineral Buildup b Metabolites. Gas/Liquid Interface & Distribution. Oxygen Transfer. Conductivity.

    By Biorem Technologies Inc. Distributor in QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you