Only show results in Connecticut? Ok

site investigation services

  • Premium

    Virtual Lab Testing Services

    All of Itasca’s geomechanical software simulates standard laboratory tests using servo-controlled, periodic, and other boundary conditions, for model calibration, design purposes, or fundamental research. Best of all, such virtual tests are completely non-destructive, repeatable, randomizable, and fully examinable.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Engineering - Site Characterization and Investigation Service line

  • Premium

    Synthetic Rock Mass Services

    Obtaining accurate rock mass strengths requires an understanding of the intact rock and joint properties of each geotechnical unit and the in-situ stress state. To estimate rock mass strengths, Itasca uses the full gamut of engineering approaches, including analytical, empirical, and numerical modeling approaches.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Engineering - Site Characterization and Investigation Service line

  • Premium

    Laboratory Testing Services

    Numerical modeling relies on relevant, correct, and accurate data to describe the behavior of soil, rock, and construction materials. To this end, Itasca regularly works with trusted, accredited university and private laboratories. Itasca can validate test protocols, review test results, and specify materials properties. In addition, Itasca ...

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Engineering - Site Characterization and Investigation Service line

  • Premium

    Acoustic Emissions Services

    Itasca acoustic emissions technology along with its seismic processing software InSite-Lab has been used in research laboratories for a wide range of scientific studies. Some specific example applications include the following.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Engineering - Site Characterization and Investigation Service line

  • Dynamic Probing

    Dynamic probing involves driving a cylindrical sacrificial or fixed cone into the ground using a high frequency percussive hammer. The diameter and angle of the cone will depend upon the chosen method. For example the heavy or super heavy dynamic probe has an angle of 90 degrees. The cone is attached to a 1m section steel rod with a nominal ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Plate Loading Test

    Plate load tests are used to make a determination of the vertical deformation and strength characteristics of soil and can allow an estimate of ultimate bearing capacity, shear strength and modulus of sub-grade reaction to be made. The method involves applying a load through a rigid plate and assessing the amount of penetration with time. The test ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Site Investigation

    LBH WEMBLEY Geotechnical & Environmental will design the optimum programme of site investigation for any project. Our investigations are properly designed to meet the often conflicting demands of geotechnical and contaminated land issues. We provide a complete range of exploratory techniques, including both intrusive and non-intrusive ...

    By LBH WEMBLEY Geotechnical & Environmental based in Buckingham, UNITED KINGDOM.

  • Engineering Supervision

    Our remediation engineers, geotechnical engineers and engineering geologists provide high quality site supervision, information logging and sample handling service to ensure that your site investigation delivers data of the quality you expect. We can provide all levels of site investigation oversight, from supervision only, to a coordinated ...

    By Environmental Reclamation Services (ERS) Ltd based in Glasgow, UNITED KINGDOM. from Site Investigation Service line

  • Trial Pit Excavations

    This technique is normally used for recovering near surface large bulk samples of granular soil or if close visual examination of the strata is required. The main advantage of this method when compared to percussion drilling is the relative speed with which the work can be carried out. The disadvantage is the level of surface disturbance suffered ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Dynamic Cone Penetrometer (DCP) Test

    The California Bearing Ratio (CBR) test is a penetration test developed by the California State Highway Department and is used to determine the mechanical strength of a soil. The test can be carried out on site or in the laboratory. The VBR test is carried out using a cylindrical plunger which penetrates the soil at a given rate. The relationship ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Intrusive Site Investigation

    ERS adds further value by providing seamless site investigation, supervision and sample handling where required. We aim to represent our clients to the highest possible standard, using the latest techniques to offer a full range of site investigation services. We can advise on the most appropriate use of an extensive range of open hole and cased ...

    By Environmental Reclamation Services (ERS) Ltd based in Glasgow, UNITED KINGDOM. from Site Investigation Service line

  • UST Investigation Services

    Owners and operators of Underground Storage Tanks (USTs) have numerous obligations closely regulated by State or Federal regulatory authorities. Furthermore, removal/closure of USTs is likely required if removed from service for more than one year. Trileaf has performed numerous UST closures throughout the Midwest states. Trileaf has experience in ...

    By Trileaf Corporation based in St. Louis, MISSOURI (USA). from Environmental Solutions Service line

  • Saudi Labs Ltd. - Geotechnical

    SAUDI LABS LTD. (SLL), is one of the leading Geotechnical Companies in the Kingdom of Saudi Arabia which has been accumulating its technical versatility through its outstanding performances in various geotechnical and laboratory works since its establishment in 1982.Adjusting to the needs of the Kingdom, SLL ventured in the field of foundation ...

    By Saudi Labs Ltd. based in Riyadh, SAUDI ARABIA.

  • Detailed Site Investigation

    In the unfortunate circumstance where contamination is identified on a property during the Stage 2, a Detailed Site Investigation ('DSI') becomes necessary to determine the nature and extent of contamination. This step can be expensive as it may require several rounds of drilling and sample collection to delineate contaminant plumes both ...

    By NEXT Environmental Inc. based in Burnaby, BRITISH COLUMBIA (CANADA). from Consulting Services Service line

  • Site Investigation

    Fundy Engineering has completed hundreds of geotechnical site investigations for various clients, including all levels of government, commercial and industrial operations and private homeowners. In general, the purpose of a site investigation is to determine the suitability of the soil for construction. A site investigation is usually the first ...

    By Fundy Engineering & Consulting Ltd. based in Saint John, NEW BRUNSWICK (CANADA).

  • Site Investigations Services

    Successful site investigation begins with the end objective in mind. EnSafe's geologists, scientists, and engineers are experienced professionals who understand the shortest path to an acceptable solution for contaminated properties. Through upfront project planning, site model conceptualization / refinement, and robust data quality objectives / ...

    By EnSafe Inc. based in Memphis, TENNESSEE (USA). from Environmental Restoration Service line

  • Site Investigations

    The On-Site methods used by QROS can produce analytical results within minutes of taking a sample. The speed at which results are generated from samples can be a huge advantage when investigating contaminated land. The primary advantage is that the investigators can react to data as it is generated. If an area is identified as being contaminated ...

    By QROS Limited based in Hayling Island, Portmouth, UNITED KINGDOM.

  • Window and Windowless Sampling

    Percussive window or windowless sampling involves driving cylindrical steel tubes into the ground using a high frequency percussive hammer. Usually the hammer is driven by a hydraulic power pack, but electric and pneumatic hammers are also available to suit particular site conditions. The drilling rig is normally track or crawler mounted and some ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Site Investigation

    Our first step is always to visit you on site. Our waste water treatment specialist will conduct a full and thorough site survey, free of charge. This gives us an opportunity to assess your needs and review your current infrastructure. This might include identifying any areas of an existing waste water treatment plant that could form part of a new ...

    By Puriflo (UK) LLP based in Poole, UNITED KINGDOM.

  • Site Investigation Services

    You’ve heard it all before – Geology Rocks! And our geologists and technicians love rocks! Save time and cost by getting our guys to do the investigations for you. They will turn the reporting around quickly which allows you to do your work for your client. We’ve been doing this stuff for a long time, we’ve got all the ...

    By Geotechnics Ltd. based in Newmarket, NEW ZEALAND. from Testing & Instrumentation Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you