Only show results in USA? Ok

soil mixing services

  • Soil Mixing

    When a site is unsuitable for in-situ remedial material injection due to the high contamination present in the shallow, unsaturated zone, soil mixing can be employed to quickly reduce concentrations to below hazardous waste standards.  The most common application of soil mixing is when soils are above the HAZ disposal limit and need to be ...

    By Innovative Environmental Technologies, Inc. (IET) based in Pipersville, PENNSYLVANIA (USA). from In-Situ Strategies Service line

  • Soil Mixing Services

    Soil Mixing technology is the latest generation of soil mixing, injecting and mixing binding agents (generally cement) with the aid of water and air with in-situ soils to produce a  final hardened product.  Once cured, these mixed soil/cement elements are capable of supporting soils and retaining groundwater for deep excavations, ...

    By Advanced Construction Techniques Ltd. (ACT) based in King, ONTARIO (CANADA). from Ground Modification Service line

  • Ground Stabilization/Settlement & Liquefaction Mitigation Services

    Shallow Soil Mixing – Mass Solidification. Deep Soil Mixing. Wet & Dry Soil Mixing. Soilcrete Columns. Overlapping Columns. In-Situ Gravity Retaining Walls. Excavator Bucket Mixing.

    By ENTACT, LLC based in Grapevine, TEXAS (USA). from Geotechnical Services Service line

  • Mixed-In-Place / Cutter Soil Mixing

    The term mixed-in-place (MIP) describes the process of mixing the existing soil and a binder suspension in-situ. Sealing elements such as cut-off walls can be produced this way. The method can also be used to immobilise contaminants in-situ – thus avoiding the necessity of excavation of the contaminated material. The Cutter Soil Mixing (CSM ...

    By BAUER Resources GmbH based in Schrobenhausen, GERMANY. from Site Containment – Site Safeguarding Service line

  • Structural Support Services

    Auger Cast Piling. Wet Soil Mixing. Steel Sheet Piles & Soldier Piles. Cement/Slurry Grouting.

    By ENTACT, LLC based in Grapevine, TEXAS (USA). from Geotechnical Services Service line

  • Cutter Soil Mixing Services

    Cutter soil mixing (CSM) provides a cost-effective solution for the rapid construction of retaining and cut-off walls by mixing soil in-situ with a cement/bentonite grout. Like traditional walls, the CSM wall consists of adjacent male and female panels. Depending on soil conditions and specific project requirements, the soil is mixed and grouted, ...

    By Nicholson Construction Company based in Cuddy, PENNSYLVANIA (USA). from Ground Treatment Service line

  • In-Situ Soil Mixing with Thermal Treatment Services

    In-situ soil mixing with thermal treatment & iron injection using lda (large diameter auger). In-situ chemical oxidation. In-situ & ex-situ stabilization & bioremediation.

    By FECC, Inc. based in Orlando, FLORIDA (USA).

  • Pneumatic Dry Media Injection

    The Pneumatic Fracturing Technology can be expanded to introduce a wide array of solid and liquid amendments into the geologic zone of interest. The injection of these materials has been applied in various geologic formations including iron filings in fractured bedrock and proppants in clay. At sites where permeability is minimal, the subsurface ...

    By PNEUMATIC FRACTURING, INC. based in Alpha, NEW JERSEY (USA).

  • Pneumatic Liquid Media Injection

    The Pneumatic Fracturing Technology can be expanded to introduce a wide array of solid and liquid amendments into the geologic zone of interest. The injection of these materials has been applied in various geologic formations including iron filings in fractured bedrock and proppants in clay. At sites where permeability is minimal, the subsurface ...

    By PNEUMATIC FRACTURING, INC. based in Alpha, NEW JERSEY (USA).

  • Waste Management / Environmental Remediation

    Waste site remediation experience extends from feasibility studies and preliminary site characterization through remedial design and its implementation. Our staff has extensive experience in the innovative and cost effective application of bentonite amended soils used in caps and liners and soil mixed containment using either slurry walls, deep ...

    By IGES, Inc. based in Salt Lake City, UTAH (USA).

  • Soil Mixing Expertise and Turn-key Environmental Remediation Services

    ISOTEC provides soil mixing expertise and turn-key environmental remediation services to treat complex sites with high contaminant concentrations using oxidants (ISCO), reductants (ISCR) and metal stabilization reagents. When applied properly, soil mixing can effectively homogenize site soil and uniformly distribute reagents to targeted treatment ...

  • Soil and Sludge Treatment Capabilities Services

    The industry utilizes a number of different acronyms to describe vertical auger mixing including: DSM (Deep Soil Mixing), SAM (Single Axis Mixing), or ISS (In-Situ Solidification/Stabilization). ENTACT performs soil mixing with large diameter augers (typically 3 to 12 ft in Diameter) equipped with mixing paddles and grout ports. As the auger is ...

    By ENTACT, LLC based in Grapevine, TEXAS (USA). from Geotechnical Services Service line

  • Activated Persulfate In-Situ Chemical Oxidation (ISCO)

    ISOTEC's persulfate technology uses sodium persulfate catalyzed by our patented modified Fenton's reagent, alkaline reagents (including sodium hydroxide and lime), hydrogen peroxide or our patented chelated iron complex to produce sulfate free radicals that attack contaminants. Persulfate when used as an in-situ chemical oxidation reagent is ...

  • Geotechnical Services

    Complex solutions for any remediation project. Engineering, and construction-support lines, are essential service components of any natural, remediation project. NRC is a leading provider of geotechnical solutions, and provides an impressive suite of structural and excavation-support services. Our scope of installation and operational specialties ...

    By NRC International Holdings based in Great River, TEXAS (USA). from Transportation - Railroad Service line

  • Geotechnical Construction

    Envirocon is a leading provider of specialty geotechnical solutions to civil and environmental projects requiring “in the ground” construction. Envirocon’s projects include the installation of some of the longest and deepest slurry and reactive barrier walls in the North America, as well as the installation of sheetpile ...

    By Envirocon, Inc. based in Missoula, MONTANA (USA).

  • In-Situ Chemical reduction (ISCR)

    ISOTEC remediates sites contaminated by hexavalent chrome using reductive reagents that include chelated iron, calcium polysulfide (CAPS), calcium/sodium polysulfide and lactate. Environmental remediation services include laboratory treatability testing, mixing and injection services. Reagents can also be delivered using soil mixing techniques.

  • Combined Sewer Overflow System

    Dawn Underground Engineering, Inc. (DUE) personnel have been involved in tunnel feasibility studies, tunnel design, rock, soil and mixed face, hydraulic analysis, geometry selection, and design of drop structures since 1975.

    By Dawn Underground Engineering, Inc., (DUE) based in Hazlet, NEW JERSEY (USA).

  • Stabilisation / Solidification (S/S)

    This process can be carried out insitu using either modified continuous flight auger soil mixing equipment or power mixers, which are attached to the arm of a long reach excavator, or exsitu using traditional excavators, batching plants and ancillary equipment. HBR has leading experts within the S/S field, who have wealth of experience in numerous ...

    By Heijmans Blackwell Remediation Ltd based in Essex, UNITED KINGDOM.

  • Soil Treatment and Soil Stabilization/solidification

    ISOTEC provides in-situ soil stabilization (ISS) expertise and turn-key services that include certified laboratory treatability testing, and mixing systems that include innovative binder delivery and single or dual-axis soil mixing equipment to remediate manufactured gas plants (MGP), heavy metals and LNPL & DNAPL concentration contaminated sites. ...

  • Soil Treatment

    SSTT provides treatment for heavy metals contaminated soil. We use patented field-proven methods that allow for cost-effective disposal or safe on site reuse. Reagents can be added directly into the soil and mixed with either excavators of specialized blending equipment. This process ensures proper reagent contact and dispersion. In another ...

    By Soil Solutions, LLC based in Hopkinton, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you