Only show results in Massachusetts? Ok

surface roughness services

  • Lapping & Polishing Services

    Lapping is the process of using a loose abrasive between two surfaces that rub together, thus abrading the part. Typically, lapping is used to achieve a surface roughness and flatness beyond the capabilities of standard grinding.

    By PremaTech Advanced Ceramics based in Worcester, MASSACHUSETTS (USA).

  • MPA - Precision Control Services

    The best measuring instruments are required to check our components and thus offer excellent quality. Mpa has a fully outfitted metrology room for all types of tests. We can perform roughness measurements for minute holes of up to 0.8 mm in diameter with the Mitutoyo SJ-410 surface roughness tester and dimensional controls up to 600 mm with the ...

    By MPA Srl based in Barberino Val d`Elsa, ITALY.

  • Machining Services

    Machining Inhouse & Out sourced at approved service providers. CNC : Vertical Turret Lathe (Hawachion) -550R -2 Nos, CNC : Vertical Machining ( Doosan ) Centre 1 No -DNM650 with 4th axis. CNC : Turning centre (Haas) - 300 ø chuck. Conventional lathe : 7 Nos. Radial Drilling machine : 1 No. Conventional VTL : 1 No. Horizontal ...

    By Amex Alloys Private Limited based in Coimbatore, INDIA.

  • Sigma Test & Research Centre - Paint & Coating Testing Services

    Paint Testing, Abrasion Resistance, Adhesion, Alkali Resistance of Paint, Cass Test, Chemical Resistance, Chip Resistance, Coating Hardness, Coating Surface roughness/Profile, Coating Thickness, Condensing Humidity, Crosshatch Adherence, Cyclic Corrosion, Drying Time, Failure Analysis,Falling Weight, Flexibility,Free Falling Sand Abrasion, FTIR, ...

    By Sigma Test and Research Centre based in Delhi, INDIA. from Building Material Testing Service Service line

  • Screening Services

    The first step of each wind energy project is the regional wind potential study to identify suitable sites. Free available sources such as wind atlases, meteorological stations data and reanalysis data as well as our own measurements and wind measurements undertaken by third parties are evaluated in this project phase. In addition, surface ...

    By SoWiTec Group based in Sonnenbuehl, GERMANY. from Wind Measurements and Surveys Service line

  • Tunnels Hydraulic

    Hydraulic tunnels can be subject to severe service conditions, such as high hydrostatic heads and water velocity that may cause severe deterioration of the concrete. The resultant cracking and spalling will allow seepage of water through the structure that can undermine its stability. In addition, the increased roughness of the surface will reduce ...

    By CARPI based in Balerna, SWITZERLAND. from Constructions Dry Service line

  • Aligning & Resurfacing Services

    Meet our first line of defense against poor dryer performance, reduced lifespan and wear: Aligning and Resurfacing. Thompson’s Aligning and Resurfacing service for all rotary drying systems is the best available technology. The ultimate goal of Aligning and Resurfacing is to create round surfaces, reduce vibrations, eliminate excess wear on ...

    By Thompson Dryers based in Topeka, KANSAS (USA).

  • Wafer Reclaim Services

    SVM provides all levels of wafer reclaim from a technically advanced low particle, super flat reclaim to the simplest strip and polish producing handling grade wafers with a clear polished surface.   Wafers which flow through SVM advanced reclaim programs successfully characterize 45nm particles and site flatness at 0.13um.

    By Silicon Valley Microelectronics, Inc. (SVM) based in Santa Clara, CALIFORNIA (USA). from Wafer Services Service line

  • Cold Cutting (Subsea and Surface) Services

    We supply a variety of pneumatically operated surface cold cutting machines. The cutters come with dual tool posts and the pipe can be cut and bevelled simultaneously, which reduces operational time. Internal or external 'J' or 'V' chamfers can be achieved with correct tooling installed. If multi-well batch setting operations are being completed ...

    By Red7Marine Limited based in Essex, UNITED KINGDOM. from Oil & Gas Service line

  • Qualification Testing Services

    BHR Group maintains a number of dedicated, adaptable test facilities and rigs available for customer hire.  We also develop test programmes for clients in order to deliver a tailored solution, while our independence assures total impartiality. Our facilities can be used or adapted for qualification and acceptance testing against ...

    By BHR Group Limited based in Cranfield, UNITED KINGDOM.

  • Mechanical Polishing Services

    Mechanical polishing is the smoothing of a surface using mechanical tools and abrasives. Mechanical polishing is performed in steps with progressively finer abrasives until a desired smoothness is achieved. The precision polishing process removes material and plastically deforms the surface while it alters the macroscopic and microscopic surface ...

    By Harrison Electropolishing L.P. based in Houston, TEXAS (USA).

  • Hydrodynamic Design Services

    The Indian Ocean tsunami which devastated 13 countries and killed more than 200,000 people in December 2004 was a chilling demonstration of the power of the hydrodynamic forces which are generated when a fluid flows over a solid object. Forces of lower magnitude are more common in the marine environment, but they may still be destructive or ...

    By Focus Offshore Ltd. based in Southampton, UNITED KINGDOM.

  • Test Procedures and Documentation Services

    Various testing procedures are executed directly in-house and documented according to your requirements.

    By Sommer & Strassburger GmbH & Co. KG based in Bretten - Gölshausen, GERMANY.

  • Sinoi - Laboratory Test Services

    Our own laboratory ist the professional department for certifying materials and suppliers. The laboratory is an integral part of our strategy driving for ongoing product development and process improvement - with a high priority placed on in-house research and development work.

    By Sinoi GmbH based in Nordhausen, GERMANY.

  • Repairs and Calibration Services

    Simply ship us your broken gages to attention: “Repair Department”. Let us respond with a free estimate of repair versus a discounted price for new. A2LA ISO 17025 Calibration to NIST of repaired gage also is available upon request. (Please make note with you gage shipment if this is required).

    By Willrich Precision Instrument Company, Inc based in Cresskill, NEW JERSEY (USA).

  • Materials Laboratory Services

    The VGB Materials Laboratory now has over 30 years’ experience in the field of damage analysis and condition assessment of power plant components, and in practically oriented research and development in the field of materials technology. We perform the associated work both on site with our customers and in our state of the art in-house ...

    By VGB PowerTech e. V. based in Essen, GERMANY. from Technical Services Service line

  • Coating Inspection and Failure Analysis

    Coating inspection and failure analysis from SGS – ensure your coating work is protecting your assets and prevent future coating failures. Whether your assets include the management of construction sites, factories, laboratories, shipyards or power plants, you need to be certain that your coating work is protecting your facility. Coatings ...

    By SGS Power and Utilities based in Camberley, UNITED KINGDOM.

  • Metallographic Lab Services

    To ensure that the coatings and cladding we provide meet the highest standards, we have a comprehensive testing lab on the premises that is permanently staffed. ASTM compliant and custom reports are produced to client requirements. Third-party verification is also available from a non-destructive testing company co-located on our compound in an ...

    By F.W. Gartner Thermal Spraying based in Houston, TEXAS (USA).

  • Pharmaceutical & Medical Devices

    Atlanta-based MVA Scientific Consultants provides analytical testing services to the pharmaceutical and medical device industries. We have a reputation for high quality services and data integrity and we will stand behind our work in the event of litigation.

    By MVA Scientific Consultants based in Duluth, GEORGIA (US) (USA).

  • Dimensional Calibration Services

    Exova METECH provides traceable and accredited calibration of dimensional measuring equipment and instruments. We are vendor independent and able to support all manufacturers and instrument types.

    By Exova Group plc based in Burlington, ONTARIO (CANADA). from Calibration Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you