Only show results available in Virginia? Ok

valve actuator services

  • Valve & Actuator Centre

    Valves and actuators are in many branches of the industry considered one of the most critical components in a production process. And rightly so. Valves, Actuators and associated control systems are responsible for reliability, safety, and environment-friendliness and in the end, for operational costs of a production process. A good choice of ...

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Premium

    Actuator Replacement Services

    Rotork has a wealth of experience in fitting actuators to valves, penstocks or dampers that are already installed on a plant. Whether a customer is replacing obsolete actuators, changing power source or motorising manual valves we are able to offer tailor made solutions designed to comply with our customers' requirements. Retrofitting actuators to ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Actuator Replacement Services Service line

  • Premium

    New Valve Automation Services

    The careful assembly of the valve to the actuator is critical to ensure that an automated valve performs correctly and reliably. There is a growing need for actuators to be installed on valves after they have left the valve manufacturer’s factory.

    By Rotork plc based in Bath, UNITED KINGDOM. from New Valve Automation Services Service line

  • Premium

    Actuator Workshop Overhaul Services

    The overhaul, repair and upgrade activities carried out in our workshops are an integral part of the life-of-plant asset management support offered by Rotork Site Services.

    By Rotork plc based in Bath, UNITED KINGDOM. from Actuator Workshop Overhaul Services Service line

  • Control Valves

    This is high-performance engineering in control valve construction: Electrically and pneumatically operated control valves for water, steam, thermal oil and other media - in DN 15 to DN 300. In many respects, Baelz control valves are superior in design because the experience of decades of Baelz as a designer of thermodynamic systems has been ...

    By W. Bälz & Sohn GmbH & Co. based in Heilbronn, GERMANY. from Control Valves Service line

  • Valves Servicing

    We deal with repairs, overhauls, installation start-ups, technical diagnosis and inspection since the 90ies of the last century. Our human resources, experience, access to the archival data bases and documentation, equipment, instructions approved by UDT (Office of Technical Inspection), set up our services and counseling at the highest level. We ...

    By Chemar Armatura Sp. z o.o. based in Kielce, POLAND.

  • Waterproof Motorized Valve Solutions

    Engineers across a wide range of industries continue to trust KZValve for electric valve actuation. KZValve practically eliminates the chance of actuator failure due to water intrusion. We offer valves from ¼” to 5″, steel and poly and control choices from analog to CAN, and everything in-between. Whether your project calls for ...

    By KZCO Inc based in Greenwood, NEBRASKA (USA).

  • HVL-VR - Valve Release Services

    A valve operation system which allows our technicians to operate valves which are seized, difficult to operate, require seating or are suffering from differential pressure. These techniques allow for an almost risk free method of dealing with unserviceable valves, as opposed to the high risk methods of linear force generated by excessive torque, ...

    By Hydra-Valve Limited based in Spondon,, UNITED KINGDOM.

  • HVL-VR (Valve Release)

    A valve operation system which allows our technicians to operate valves which are seized, difficult to operate, require seating or suffering from differential pressure. These techniques allow for an almost risk free method of dealing with unserviceable valves, as opposed to the high risk methods of linear force generated by excessive torque ...

    By Hydra-Ject Limited based in Conwy, UNITED KINGDOM.

  • Valve Rebuild Services

    Servicing all brands of airlocks and diverter valves. Valve Rebuild WorkareaYou have a lot riding on the efficiency of your valves. Don’t trust your reworking to just anyone—return them to the experts that built them.

    By Mac Process - Schenck Process group based in Kansas City, MISSOURI (USA).

  • Diverter Valve Assessment Services

    Oxidizers Inc. performs full diverter valve assessments. Diverter valve leaking causes lower destruction and thermal efficiencies.  Oxidizers Inc inspects hundreds of valves per year offering repairs, rebuilds and seal adjustment.  Whether you have poppets, metal to metal butterfly, rotary, or tadpole seals Oxidizers Inc. can perform the ...

    By Oxidizers Inc. based in Corona, CALIFORNIA (USA). from Diverter Valve Assessment Services Service line

  • Valve Automation Solutions

    Valves are the most energy consuming devices in the process loop. Our factory-trained sales engineers work directly with our customers to identify system requirements, size and select the right valve and provide any additional services, software or training to assure long-term results.

    By Rawson Inc based in Houston, TEXAS (USA).

  • Services

    Services available: Valve Repair, Slide and Sluice Gate Repair and adjustment, Pump Repair, Actuator Repair & Installation, Valve Actuation, Field Service, Product operation & training.

    By Hennesy Equipment Sales Co based in Phoenix, ARIZONA (USA).

  • Valve Blockage Test Services

    Flush-able Wet Wipes, Golf balls, telephones? What gets flushed down the sewer system surprises many people but not seasoned operators who have seen it all. The Flovac valve, with a 50 year design life, is designed for municipal sewers and needs to be resilient.We asked many operators from around the world what items give them the biggest ...

    By Flovac based in Venray-Oostrum, NETHERLANDS.

  • Premium

    Preventive Maintenance and Oxidizer Evaluations Services

    Did you know that some air permits require oxidizer operators to have scheduled maintenance programs for their systems in order to remain in compliance with regulations? The Anguil PME is a thorough audit of a system's operation, covering multiple days and an extensive checklist. Upon completion, customers receive a detailed report with ...

  • Modifications of Standardized Valves and Gaskets Service

    We realize our customer-specific deliveries with our new logistics centre in Zwenkau near Leipzig. Here, in one of Europe's largest warehouses for valves and gaskets (appr. 4000 m2), we keep on stock a wide range of the corresponding industrial supply, taylor-made for customer's use.

    By Siekmann Econosto GmbH & Co. KG based in Dortmund, GERMANY.

  • Fluid Catalytic Cracking (FCC) Services

    Delta Controls is an international service and repair center for refurbishment, overhaul and modification of FCC slide valves, plug valves, ball valves, gate valves and butterfly valves. Including all controls together with associated pneumatic/hydraulic/electric actuators.

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Value Repair & Reconditioning Service

    We offer total valve management with world class capabilities to repair and recondition various size ranges for all kind of valve. This includes: Isolation Valve – Gate, Globe, Check, Plug, Ball and Butterfly valves, High Pressure Valve, Pressure Relief Valves – Conventional, Balanced Bellows, Pilot Operated, Vacuum type, Control Valve ...

    By PT KOTAMINYAK INTERNUSA based in Jakarta, INDONESIA.

  • Premium

    Spare and Replacement Parts for Oxidizers

    Having the necessary spare parts readily available is a prerequisite for minimizing the cost and inconvenience of system shutdowns. At Anguil, we have put a lot of effort into developing replacement part plans to support oxidizers built by us as well as other manufacturers. We take inventory of your oxidizer needs and recommend what spare parts ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Spare and Replacement Parts for Oxidizers Service line

  • Services

    Besides its production programme, POLNA corp. s.r.o. offers also the following services: Complex technical support with the design and calculation of industrial valves. Complete design of the steam conditioning control valves, from project to realization. Engineering in supplying of industrial armatures. Solving problems with operating of ...

    By POLNA corp. s.r.o. based in Trinec, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you