Only show results in Texas? Ok

valve operator services

  • Premium

    Remove and Control Iron Sulfide

    Removing and Control Iron Sulfide (FES) is very important in the oil field operation (downhole or pipelines). Iron sulfide can form a deposit on pumps, pipelines and check valves. Iron sulfide is also pyrophoric (ignites spontaneously when exposed to air). JC 9450 react with the iron sulfide creating iron oxide and sulfate which will reduce the ...

    By Jenfitch, LLC based in Walnut Creek, CALIFORNIA (USA). from Oil & Gas Service line

  • Operation Services

    All types of forklifts require training in order to operate, and practice in order to be utilized effectively, and efficiently.  That’s true for the Flexi too.  It’s easy to learn to operate a Flexi.

    By Narrow Aisle Inc based in Dallas, TEXAS (USA).

  • Pipeline Operations Services

    We offer a wide range of Pipeline Operation Services. Our experienced and highly trained staff will not only complete the works to the highest engineering and safety standards, but will compliment this quality with expert technical advice whatever your requirements are.

    By National Grid PLC based in London, UNITED KINGDOM.

  • Value Repair & Reconditioning Service

    We offer total valve management with world class capabilities to repair and recondition various size ranges for all kind of valve. This includes: Isolation Valve – Gate, Globe, Check, Plug, Ball and Butterfly valves, High Pressure Valve, Pressure Relief Valves – Conventional, Balanced Bellows, Pilot Operated, Vacuum type, Control Valve ...

    By PT KOTAMINYAK INTERNUSA based in Jakarta, INDONESIA.

  • Setup and Operation Services

    The HPLC system includes an Agilent G1310A isocratic pump and a G1314A variable wavelength detector. Since the online SPE takes care of sample loading and injection, the HPLC only needs a pump, a detector, and a computer with the ChemStation software. Through specially designed valves and syringe pumps, the online SPE transfers samples to the SPE ...

    By PromoChrom Technologies Ltd. based in Surrey, BRITISH COLUMBIA (CANADA).

  • HVL-VR (Valve Release)

    A valve operation system which allows our technicians to operate valves which are seized, difficult to operate, require seating or suffering from differential pressure. These techniques allow for an almost risk free method of dealing with unserviceable valves, as opposed to the high risk methods of linear force generated by excessive torque ...

    By Hydra-Ject Limited based in Conwy, UNITED KINGDOM.

  • HVL-VR - Valve Release Services

    A valve operation system which allows our technicians to operate valves which are seized, difficult to operate, require seating or are suffering from differential pressure. These techniques allow for an almost risk free method of dealing with unserviceable valves, as opposed to the high risk methods of linear force generated by excessive torque, ...

    By Hydra-Valve Limited based in Spondon,, UNITED KINGDOM.

  • Altitude Valve Repairs & Maintenance

    All these issues are directly related to the altitude valve at the base of the tank. An altitude valve is comprised of three basic parts: the main valve, the operating chamber and external control piping. These valves have replaceable seats in the main valve and operating chamber area that do wear over time. The external control piping contains ...

    By TEMSCO, Inc. based in Suwanee, GEORGIA (US) (USA).

  • KUEHME - Services

    KÜHME valves are usually used in safety-relevant areas. They ensure a safe and reliable operation of power plants and other industrial plants. Therefore, it is of essential importance that the valves are checked and maintained on a regular basis. Providing KÜHME-Service does not guarantee the perfect operation of the valves only. The ...

    By KÜHME Armaturen GmbH based in Bochum, GERMANY.

  • Services

    You don’t just buy a Hobbs Valve, you buy complete reassurance. Your valve has been designed and engineered from the outset to be the most reliable product in the market. And, on the rare occasions when maintenance is needed, our design ensures your valve is out of service for the absolute minimum amount of time, with replacement parts ...

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Automatic - Maintenance Services

    Disconnect air and electricity and bleed all pressurized lines before removing two and three position valves. Consult the Engineering and Maintenance section of the Automatic Valve catalog #0001-001 for maintenance instructions. Servicing should only be undertaken by qualified and knowledgeable personnel who understand the function and operation ...

    By Automatic Valve based in Novi, MICHIGAN (USA).

  • Steam Testing Station

    We are able to test safety valves and valves with following parameters:Maximum operataing pressure PS-200 bar, Maximum operating temperature TS-650 C deg.We are able to test:safety valves up to DN250,gate valves up to DN400,but after request we can test also bigger diameters.With presence of certifying unit such as UDT, TUV, etc.

    By Chemar Armatura Sp. z o.o. based in Kielce, POLAND.

  • Buried Service

    A major U.S. products Pipeline Company had a requirement to replace a number of 3' and 4”, ANSI 150 Series, ball and plug valves installed in meter prover drain applications. They wanted to minimize future outage time and costs associated with buried leaking prover valves. The original valves were buried below grade at varying depths ...

    By Chromatic Industries, Inc. based in Conroe, TEXAS (USA).

  • Control Valves

    This is high-performance engineering in control valve construction: Electrically and pneumatically operated control valves for water, steam, thermal oil and other media - in DN 15 to DN 300. In many respects, Baelz control valves are superior in design because the experience of decades of Baelz as a designer of thermodynamic systems has been ...

    By W. Bälz & Sohn GmbH & Co. based in Heilbronn, GERMANY. from Components Service line

  • Valve Services

    Exigo EPS Ltd provide a range of valve services including: Maintenance, refurbishment, testing. With engineers ensuring that any work carried out is completed to the highest of standards on Section I and Section VIII Safety Relief Valves on Convectional / Bellows / Modulating as well as Pop Action Pilot Operated Valves.

    By Exigo EPS Ltd based in Leicester, UNITED KINGDOM.

  • Valve Repair Services

    CECO Pipeline Services is very knowledgeable of DOT requirements for valve maintenance. In addition to federal regulations, we understand how important it is from an operations standpoint to ensure your valves are properly maintained. We have trained experienced and skilled personnel that can service your valve needs from inspections to greasing ...

    By Compressor Engineering Corp based in Houston, TEXAS (USA).

  • Scheduled Testing / Mobile Testing Services

    Scheduled Testing All safety valves must be tested regularly to ensure safe and correct operation. Spring loaded safety valves are sometimes equipped with additional pneumatic, hydraulic or electro pneumatic auxiliary actuators and may have additional control units which are also subject to annual performance tests in accordance with ...

  • Valve & Actuator Centre

    Valves and actuators are in many branches of the industry considered one of the most critical components in a production process. And rightly so. Valves, Actuators and associated control systems are responsible for reliability, safety, and environment-friendliness and in the end, for operational costs of a production process. A good choice of ...

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Tank Cleaning

    Aquilex HydroChem has the experience and the versatility to handle the simplest to the most complex tank cleaning jobs. Our services can help you reduce your disposal costs and get your tank back into operation quicker.Our commitment to innovations in safety led to the development of a continuous monitoring system for vacuum host continuity. By ...

    By HydroChem LLC. based in Atlanta, GEORGIA (US) (USA).

  • Services

    Services available: Valve Repair, Slide and Sluice Gate Repair and adjustment, Pump Repair, Actuator Repair & Installation, Valve Actuation, Field Service, Product operation & training.

    By Hennesy Equipment Sales Co based in Phoenix, ARIZONA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you