waste processing services in Italy

  • ANAEROBIC DIGESTION

    Hydroitalia – Colsen proposes anaerobic digestion plants to produce renewable energy from the treatment of organic solid wastes and by-products. Our biogas plants endowed with new technology devices developed to improve the efficiency of the digestion process. Many environmental and operative advantages can be achieved applying anaerobic ...

    By Hydroitalia - Colsen Srl based in Medicina, ITALY. from ANAEROBIC DIGESTION Service line

  • Premium

    Waste-to-Energy Solutions

    Turning waste into a resource with cost-effective and sustainable technologies. At Fluence, we have more than 30 years of experience in the design, construction, and operation of waste-to-energy plants for a wide range of industrial and municipal clients. Our proprietary anaerobic treatment technologies process wastewater and sludge to produce ...

    By Fluence Corporation Office in Padova, ITALY. from Waste-to-Energy Solutions Service line

  • Riccoboni - Environmental Global Services

    Global Services  solves the problems posed by industrial sites with high environmental sensitivity, starting with the management of contacts with the Supervisory Bodies, through to the processes of optimization, reduction, treatment and disposal of all waste produced by a production plant. Riccoboni Global Service is especially efficient in ...

    By Riccoboni S.p.A. based in Parma, ITALY.

  • Industrial Wastes

    The anaerobic digestion process can be successfully applied to treat organic wastes and by-products from different industrial sectors.

    By Hydroitalia - Colsen Srl based in Medicina, ITALY. from Industrial Wastes Service line

  • Waste Treatment and Land Reclamation Process Services

    Biodermol Ambiente is the ideal partner for the reclamation of contaminated sites offering “turnkey” contracts as well as consulting services and technical support for the management of these sites, ranging from the preliminary assessment activities to the finalization of the project.

    By Biodermol Ambiente S.r.l. based in Lavis (TN), ITALY.

  • Riccoboni - Hazardous and Non-Hazardous Waste Disposal Services

    Riccoboni has a fleet of authorized vehicles for the transportation of hazardous and non-hazardous and ADR category waste. The transport service works alongside core services to guarantee 100% control to the client of the waste processing phases. The group's synergy enhances its capabilities and offers cross-border transport services for waste ...

    By Riccoboni S.p.A. based in Parma, ITALY.

  • Customized Process Solutions Services

    VOMM has always based its strategy on R&D and innovation, this is proven by more than 50 international patents for processes and equipment developed in different applications: flours, rubbers, soaps and detergents, wastes, etc.

    By VOMM Impianti e Processi S.p.A. based in Rozzano, ITALY.

  • Waste Cycle Management

    ENEA carries out research, development, implementation and dissemination of innovative technologies and systems for the treatment, disposal and recycling of wastes, with a special focus on treatment technologies and processes for energy generation from waste.ENEA also designs, realizes and operates several laboratories and prototypes ...

  • Showcase

    Service support for your Waste-to-Energy and gas upgrading plant

    As biogas all-rounders, we know biogas generation processes better than anyone and offer a service package that guarantees your peace of mind.Your advantages at a glance:+ Service from a single sourceTo keep your plant running efficiently, it’s important that the services offered are perfectly coordinated and that your service partner is ...

    By EnviTec Biogas AG Office in Verona (VR), ITALY.

  • Waste Materials Separate Service

    To separate waste materials and recycle them is necessary and economically profitable: there are lots of specialized industries in this working area that process car and truck waste tires. They often come in contact with forklift tires that turn out to be a problem, as they do not know how to recycle them. We have the solution for this problem, as ...

    By E-COVA s.n.c. based in Casalmaggiore (CR), ITALY.

  • Processing and Recycling Tyres Services

    The disposal of disused tyres is a very current topic. The three processing alternatives allow for different solutions: The first stage allows to obtain a reduction in size (tyre crumb) with the purpose of reducing the volumes in order to facilitate warehousing or to be used for energy production as an alternative combustible. The same can be said ...

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Recycling Waste Materialsl Services

    The demolition, especially when referred to large areas, produces a considerable amount of debris that can be recycled. The N C L Group s.r.l. is able to cater to this process through the sorting of the materials, and then start them to local recycling facilities (reinforced concrete, bricks, paving etc.) or the blast furnaces (ferrous materials, ...

    By NCL Group s.r.l. based in Ferentino, ITALY.

  • Monitoring of Air Quality Services

    The waste processed at the Barricalla plant can be a source of polluting substances, which could rise from the body of the dump, it appears then essential to perform monitoring of air quality so to avoid eventual pollution. For this reason Barricalla assesses its emissions isolating the typical pollutants from waste processing activities, in order ...

    By Barricalla Spa based in Collegno Torino, ITALY.

  • Industrial Biological Waste Water Treatment Services

    Complete treatment plants for all kinds of biological & physical chemical treatments: Dairy industries (milk and cheese). Food and beverage processing industries (wine & beer, sugar, fruits, vegetables, juices, fish and meat). Slaughter houses, Laundries, Tanneries, Pharmaceutical, Oil-refinery, Textiles, Dye-works, Iron works, Grease and ...

    By SACCO`ENGINEERING S.R.L. based in Sorbolo (PARMA), ITALY. from Industrial Biological Waste Water Treatment Services Service line

  • Solid Wastes Sorting and Bio Mechanical Treatment [MBT] Services

    Public Administrations propose Directives for the bio mechanical treatment of the municipal solid wastes [MSW], for it is increasingly necessary to coordinate the plant design options with the concrete situations and the local requirements; in the mean time, that tool can assist in the evaluation (i.e. during the stage of the technical analysis of ...

    By DE.CO. Engineering based in Caselle, ITALY.

  • Intelligent Transfer Stations (ITS)

    Intelligent Transfer Stations (ITS®) are plants for the recovery of the Residual Fraction of Municipal Solid Waste after waste sorting. This result is achieved through a simple, innovative process patented by Sistema Ecodeco®: the Biocubi® process.

    By Ecodeco based in Giussago, ITALY.

  • Sludge Treatment Services

    Simpec provides sludge treatment systems coming from waste water treatment processes or from other workmanships.

    By SIMPEC S.r.l. based in Nova Milanese (MB), ITALY.

  • Physical And Chemical Treatment Services

    Due to Regional decision n° A2952 of 11/09/08, Navarra Inc. can perform processes of waste stabilization. This D9 activity is a chemical-physical process that neutralizes contaminated substances by fixing them inside a neutral matrix; fixing agents (like lime, cement, silicates etc.,) then, are mixed with waste. The so produced product is ...

    By Navarra S.p.A. based in Ferentino (FR), ITALY.

  • Services

    Collection, sorting, treating, and recovery of recycled paper.Manufacturing corrugated cardboard for boxes.Trade in printing paper and converting.Destruction of confidential paper archives and confidential documents (re. Basel 2).Collection and transport of special, dangerous and non-dangerous industrial waste products deriving from processing and ...

    By Masotina S.p.A. based in Corsico (MI), ITALY.

  • VTU - Turn-key Solvent Recovery Services

    Organic solvents are widely used in the industry. As a consequence, large amounts of liquid waste with various solvents or other impurities must be disposed of. VTU offers tailor-made systems that reduce both the need of fresh solvents and the amount of contaminated solvents:Continuous or discontinuous distillation,Rectification in vacuum and ...

    By VTU-Engineering GmbH Office in ITALY. from Turn-key Solvent Recovery Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you