Only show results in Virginia? Ok

Water Measuring Instrumentation services

  • Atmospheric Monitoring Services

    Hilase offers its atmospheric humidity measuring instrument, which can be easily implemented on research aircrafts. Depending on the sampling inlet, it can be used to measure water vapour and/or total water. This instrument was already successfully operated e.g. within the CARIBIC project and a flight test within a EUFAR (EU FP6) project.

    By HILASE Ltd. based in Berényi, HUNGARY. from Measurement Service Service line

  • Deformation Measurement Service

    Deformation- and Caliber-Measuring Instrument DKM 150. TÜV (Technical Control Board) tested. Until now pipelines and conduits could only be inspected in respect of quality. With the deformation and caliber measuring instrument DKM 150 there is for the first time an instrument available with the help of which inexpensive and robust mechanical ...

    By MTA Messtechnik GmbH based in Veit an der Glan, AUSTRIA. from Service for Waste Water Service line

  • Longitudinal Profile Measurement (LPMH) Service

    Problems with incline or efficient waste water disposal! Regular inspected inclines guarantee safe and appropriate waste water disposal. LPMH - System is the quality assurance instrument for waste water disposal lines. The LPMH measuring system is an innovative technique to survey and visualise the slope / depth profile of buried pipelines after ...

    By MTA Messtechnik GmbH based in Veit an der Glan, AUSTRIA. from Service for Waste Water Service line

  • Premium

    Calibration and Verification : Process Analytics

    When using a measuring instrument, you need to be confident that your results are accurate and precise. METTLER TOLEDO calibration services deliver this type of confidence. To document the results, we have designed a variety of calibration certificates to meet ISO requirements or other industry standards.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

  • SMHI - Measurements In The Air And Water

    SMHI carries out qualified measurements of the air and water which form the basis of economic and environmentally strategic decisions. The investigations concern physical and/or chemical and/or biological conditions.

    By SMHI International Consulting Services based in Norrköping, SWEDEN. from Environment Service line

  • Flow measurements

    We offer research, testing and consulting services for the following queries:. Inspection of measuring devices at storm water basins and waste water treatment plants. Comparative measurements on site with the most up-to-date, regularly calibrated measuring instruments. Measurement of groundwater infiltration in sewers. Identification of sources ...

    By IKT – Institute for Underground Infrastructure based in Gelsenkirchen, GERMANY.

  • Current Measurements

    We can undertake either short term current measurements such as with a moving vessel ADCP (MVADCP) system or simple anchored vessel measurements in estuarine waters for example.

    By Wallingford Environmental Surveys Ltd. based in Wallingford, UNITED KINGDOM. from Core Services (near shore) Service line

  • Measurements Services

    Any optimisation work on industrial operations generally starts with an evaluation of the current situation and ends with a similar evaluation of the improved mode of operation. This often includes special measurements to deliver the necessary information on the equipment and systems, the process and the products. We offer a large variety of ...

    By VDEh-Betriebsforschungsinstitut GmbH based in Düsseldorf, GERMANY.

  • Leak Detection

    ADS now offers cost-efficient, high-technology products for flow measurement and leak detection with U.S. based service and support. These technologically innovative instruments form an integrated approach to system monitoring and leakage control for water distribution networks. ADS Water Loss Control Products are powered by technology from ...

    By ADS Environmental Services based in Huntsville, ALABAMA (USA). from Water Services Service line

  • Instrumentation and Monitoring Services

    Every ground investigation has different monitoring needs. Groundwater pressure and flow, ground movement, settlement and slope instability can all affect the performance of engineering structures and the final cost of construction. In addition, we can also investigate the concentration and emission rates of ground gases or monitor the movement of ...

    By Environmental Scientifics Group based in Staffordshire, UNITED KINGDOM. from Geotechnical Services Service line

  • Geo-technical Instrumentation

    Geo-technical monitoring has become a major requirement in all aspects of today's construction industry. Requirements for instrumentation that can be used in the continuous monitoring of embankments, structural settlement , load and stress testing, means clients are now looking for reliable instrumentation that is proven in today's harsh working ...

    By NVM Limited Ireland based in Drogheda, IRELAND.

  • Electrical Design and Instrumentation

    Our extensive experience in electrical design enables us to provide clients with complete drawing packages.

    By RTS Consulting Inc. based in Annapolis, MARYLAND (USA). from Industrial Automation Service line

  • Two-Phase Flow Measurement Services

    On-line Continuous Instrumentation and Discrete Sampling Methods for Cooling Water, Steam Condensate, Steam, Gas and Water Mass Flow Rates based on Thermochem Tracer Flow Testing (TFT).

    By Thermochem, Inc. based in Santa Rosa, CALIFORNIA (USA). from Geothermal Energy Services Service line

  • Environmental Monitoring Measurement Services

    The Stack Simulator can be used for both instrument development and personnel training. It allows manufacturers of new continuous emission monitors to test their equipment over a range of operating conditions. Stack monitoring teams can test their procedures and proficiency under controlled conditions. The facility is available to hire with ...

    By National Physical Laboratory (NPL) based in Teddington, UNITED KINGDOM.

  • Multi-Phase Flow Measurement Services

    On-line Continuous Instrumentation and Discrete Sampling Methods for Gas, Oil, Hydrocarbon Condensate, Steam, and Water Mass Flow Rates based on Thermochem Tracer Flow Testing (TFT)Technologies.

    By Thermochem, Inc. based in Santa Rosa, CALIFORNIA (USA). from Oil and Gas Services Service line

  • Dam Engineering

    ARM provides the engineering consulting team necessary to design new dams, or to inspect, evaluate, repair, and rehabilitate existing dams. Our strength lies in developing a scope of services that addresses not only the technical issues, but also reflects the expectations of our client. Once the scope has been established, ARM will assemble the ...

    By ARM Group Inc. based in Hershey, PENNSYLVANIA (USA). from Water Resources Service line

  • Near surface GPR Georadar Instrument

    The principle of operation of GPR is generating and sending an electromagnetic wave into examined soil, rock or other material. This is done by transmitting antenna generates a signal of a specific frequency. Wave passed through the soil is refracted, reflected on the geotechnical borders, when encountering facilities, infrastructure or other ...

    By GEOSPECTRUM S.C. based in Krakow, POLAND. from Georadar Service line

  • Metering & Flow Technology

    WRc are experts in metering and flow measurement across all water and wastewater applications, from source to tap and back again. Working with our customers, we provide practical and cost effective solutions to address their metering and flow measurement needs. We are experienced in all technologies from traditional mechanical meters to the latest ...

    By WRc plc based in Swindon, UNITED KINGDOM. from Drinking Water Supply Service line

  • Custom Process & Flow Measurements

    Intek is your process flow partner. With thirty years in the flow measurement business, Intek has extensive experience adapting existing designs to specific applications, or creating new designs to solve particular problems. This innovative approach has resulted in flow related patents, as well as the development of units for use in manned space ...

    By Intek, Inc. based in Westerville, OHIO (USA).

  • Raw Water

    Our scope of services includes: Diagnosis of Existing Systems. Demand Studies. Master Plans Development. Water Source Selection. Storage Facilities. Intake and Conduction Structures. Conductions in channels, pipes, and tunnels. Treatment Plants. Water Supply Networks. Pumping Stations. Segmentation and macro and micro measuring. Plans to reduce ...

    By HMV Engineers based in Bogotá D.C., COLOMBIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you