wipe sampling Services | Environmental XPRT

Abatement Wipe Sampling & Analysis Services

At Paradigm we offer laboratory analysis of paint chips, dust wipes, soils, and drinking waters. This testing is often used to supplement the information gathered during an XRF survey. Paint chips can be used as an alternative to XRF, and are often used to verify XRF readings. Wipe samples are used to assess ...

By Paradigm Environmental Services, Inc. based in Rochester, NEW YORK (USA). from Lead Based Material Service line

Lead Based Paint Air & Wipe Sampling Services

Environmental performs construction monitoring and air sampling services, we will protect your interests by having trained and certified professionals on site at all times during the lead abatement process. We will observe and document compliance with regulations and standards and note the protective measures taken to ...

By All Phase Environmental, Inc. based in Huntington Beach, CALIFORNIA (USA).

Taking Dust, Wipe, Swab and Material Samples

Dependent on the objective agreed, the further procedure will include qualified sampling of materials, dusts or biological deposits, based on the recognized and applicable standards, guidelines and rules. Number and locations of the sampling points will be chosen as agreed with ...

By AB-GM based in Mannheim, GERMANY.

XRF Lead Analyzer

An instrument that can determine lead concentration in paint films in milligrams per square centimeter(mg/cm2), settled dust wipe samples micrograms per wipe(µg/wipe), soil in parts per million (ppm), and air samples in micrograms per cubic meter (µg/m3) using the principle of x-ray fluorescence ...

By Lead Safe, LLC based in Syracuse, NEW YORK (USA).

Lead Paint Risk Assessment

; limited environmental sampling (i.e., collection of dust wipe samples, soil samples, and deteriorated paint samples); and preparation of a report identifying acceptable abatement and interim control strategies based on specific ...

By Lead Safe, LLC based in Syracuse, NEW YORK (USA).

Lead on Surfaces

The examination of Lead on Surfaces is conducted using wipe samples. This Dust/Wipe category of environmental lead investigations often is employed to establish baseline conditions of surfaces as well as to establish clearance criteria after an abatement activity. AIHA and others have promulgated strict ...

By International Asbestos Testing Laboratories (iATL) based in Mt. Laurel, NEW JERSEY (USA). from Lead Analysis Service line

Industrial Hygiene Analysis Services

Bureau Veritas Offers Industrial Hygiene Analysis of more than 2,000 Chemicals. We provide testing services to government as well as a wide range of industries including petrochemical, manufacturing, mining, academia, construction and insurance. We analyze for various particulates, vapors and gases in air and ...

By Bureau Veritas North America, Inc. based in New York, NEW YORK (USA). from Environmental Laboratories - Industrial Hygiene Service line

Types of Mold And Bacteria Testing

matrices), tape-lift and swab or wipe ...

By Mold & Bacteria Consulting Laboratories (MBL) Inc. based in Mississauga, ONTARIO (CANADA).

Asbestos and Lead Paint Service

Investigation Phase: Asbestos containing material investigations, NYS/EPA AHERA inspectors and NYC investigators, Lead based paint investigations, EPA/NJ inspectors/risk assessors, Paint chip and dust wipe sampling and XRF testing, Lead in water and soil testing Interpretation of laboratory results, Risk ...

By Warren & Panzer Engineers, P.C. based in New York, NEW YORK (USA). from Industrial Hygiene Services Service line

Simulated Rainfall Runoff Studies Services

Relying on natural rain can be problematic and expensive for those conducting a runoff study. Everyone in the industry knows of a runoff study in which no runoff was generated, or, conversely, in which a massive event wiped out sampling equipment, ruining the experiment. Getting a natural runoff event of ...

By Stone Environmental, Inc. (SEI) based in Montpelier, VERMONT (USA). from Agrochemical Fate and Exposure Services Service line

Analyzing Dust, Wipe, Swab, Material and Filter Samples

Following the sampling/air-measuring activities and properly compliant transport of the samples, the dust, material, contact-plate, adhesive-film, wipe or swab samples and/or the air-sample filter carriers will be examined and analyzed in certified/accredited and specialized laboratories – in ...

By AB-GM based in Mannheim, GERMANY.

Environmental Microscopy

in Buildings (Indoor Air Quality) & HVAC Systems, Asbestos Analysis from Surfaces from Wipe & Micro-Vac sampling, Waterborne Asbestos Fibers in Drinking or Waste ...

By Enviroscience Consultants, Inc. based in Ronkonkoma, NEW YORK (USA).

Lead Investigation / Risk Assessment Services

ACT performs limited and comprehensive lead-in-paint investigations and risk assessments in which all painted surfaces observed throughout a building are documented and sampled for the presence of, or assumed to contain lead, depending on the clients needs. Soil samples and dust wipes are also ...

By ACT Environmental Services, Inc. based in Indianapolis, INDIANA (USA).

PCR Test: 15 Important Indoor Molds

Analysis includes detection and quantification of fifteen important indoor molds by mold-specific quantitative PCR (MSQPCR). Applied methodology has been developed by and is licensed through the EPA. Detection and quantification include Acremonium strictum, Aspergillus fumigatus (A. fumigatus and Neosartorya fischeri), Aspergillus niger (A. niger, A. foetidus and A. phoenicis), Aspergillus ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

1-Media Fungi Surface Culture Full (Pen&Clad Genus)

Multiple dilutions of the sample are prepared and plated onto a broad-spectrum fungal media (MEA) and incubated for a designated amount of time at a specified temperature. Analysis includes identification to genus for Cladosporium and Penicillium, and identification to species for all other fungal ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Surface Samples Service line

Bacteria Surface Culture 3-Genus ID

Analysis of culturable bacteria on surfaces, waters, and bulks. The service includes identification, to the genus level, of the three prevalent colony types found on the culture to assist in interpretation of ...

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Bacteria Testing: Surface Samples Service line

Sealed Source Leak Testing Service

In keeping with our commitment to quality and ensuring your regulatory compliance, Stuart Hunt & Associates leak testing service meets the Canadian Nuclear Safety Commissions expectations for sealed radioactive source leak testing. Our national laboratory will test your samples for radioactive ...

By Stuart Hunt & Associates Ltd. based in St. Albert, ALBERTA (CANADA).

Chinese Drywall Testing

Chinese Drywall Screen Test as Low as $61LA Testing Releases Six Chinese Drywall Testing ...

By LA Testing based in South Pasadena, CALIFORNIA (USA).

Mold Inspection & Testing Services

Our Mold Department provides both viable and non-viable analysis supervised by a PhD Microbiologist. We offer turnaround times from 5 days to same-day service, as well as weekend analysis for non-viables. MVOC analysis is also available (see IH Chemistry). We can also create custom reports that are available online or via ...

By Materials Analytical Services, LLC (MAS) based in Suwanee, GEORGIA (US) (USA).

Consumer Products Testing, USP, and Toy Testing

LA Testing has analyzed a wide range of Consumer Products such as disinfectants, anti-microbial products, coatings, polymers, paints, automotive fluids, soaps, cosmetics, oils, glass, toys, detergents, sanitizers, cleaners, baby wipes, and raw product materials. Manufacturing firms regularly send their samples to ...

By LA Testing based in South Pasadena, CALIFORNIA (USA).