Only show results available in Massachusetts? Ok

X-ray analysis services

  • SEM / X-Ray Analysis Services

    Meissner employs a variety of different instruments to aid in the analysis and identification of contaminants removed from filtered fluids. Through SEM and X-ray analysis, as well as low vacuum imaging of a filter's surface, MTS can assist customers in identifying both organic and inorganic contaminants removed.

    By Meissner Filtration Products, Inc. based in Camarillo, CALIFORNIA (USA).

  • Premium

    FLUXANA - Test Methods Services

    To test your quality control, FLUXANA offers the competent analysis of your samples with X-ray fluorescence analysis (XRF). Our laboratory works in accordance with ISO 17025; accreditation has been applied for with the Deutschen Akkreditierungsstelle GmbH (DAkkS, German Accreditation Body).

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Proficiency Test / Round Robin

    FLUXANA is an international provider of proficiency testing. Based on DIN EN ISO/IEC 17043:2010 we regularly offer proficiency testing for X-ray fluorescence analysis. By participating in the proficiency testing, it is possible for our customers to compare their analytical methods and test procedures with other international laboratories. To do ...

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Chemical Analysis

    Acuren’s chemists and technologists take a multi-disciplined approach to ensure accurate, timely, and cost-effective results.  Techniques employed in our laboratories include optical emission spectroscopy, atomic absorption, energy-dispersive x-ray analysis, combustion, fire assay and wet chemical analysis. In the field our services ...

    By Acuren Inspection Inc based in Edmonton, ALBERTA (CANADA). from Materials Testing Service line

  • Premium

    Air Filter Metals Analysis Services

    Cooper Environmental is committed to providing high quality, competitively priced analytical results with rapid turn-around-times. We employ energy dispersive X-ray Fluorescence (ED-XRF) as our analytical technique to quantify the metals deposited on filters.

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Lead and Asbestos Consulting Services

    Facility Inspections Risk Assessment, Project Design, Title X and HUD Inspections, Air Monitoring, Project Planning and Specifications, Project Management, X-Ray Florescence Analysis, Sampling and Analysis OSHA 1926.62, Compliance Programs, Clearance Testing, Renovation and Remodeling Planning.

    By Enviroscience Consultants, Inc. based in Ronkonkoma, NEW YORK (USA).

  • Asbestos Testing Services

    Asbestos under a microscopeSanAir is a full-service laboratory offering asbestos analysis in Phase Contrast Microscopy (PCM), Polarized Light Microscopy (PLM), and Transmission Electron Microscopy (TEM). Our state-of-the-art Asbestos Laboratory provides quality analytical results with rapid turn around times within three hours. Our polarized light ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Materials & Forensics Testing

    SanAir provides a full range of Transmission and Scanning Electron Microscopy services with fast response time for your required needs. SanAir's facility includes the finest electron optics and preparation equipment providing you with the highest quality. Only the most recent and accepted protocols are followed, insuring you of up-to-date results. ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Laboratory Services

    J-PECO has a Collaboration Laboratory with renowned university and it is used for the Material Department doing material tests. This laboratory has metal materials test room, inorganic non-metallic test room, materials physics and microstructure room, electronic microscopy room, X-ray diffraction analysis room, etc. Our Collaboration Laboratory ...

  • Premium

    Methods Development Services

    Cooper Environmental prides itself in accepting clients’ unique technical challenges and providing them with results through our innovated technical solutions. Today, 50% of our recent method development projects employ X-ray Fluorescence (XRF) for trace metals analysis; however, we are actively developing non-XRF methods, such as ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Lead Testing and Abatement

    Exposure to lead, a toxic metal that was used for many years in paint and other products, may cause a range of health effects. Jerome Environmental Services, LLC is pleased to inform you that we are an EPA lead-safe firm, certified to conduct a wide range of lead services, including X-Ray Fluorescence (XRF) Analysis, lead abatement, and dust wipe ...

    By Jerome Environmental Services, LLC based in Bronx, NEW YORK (USA).

  • Reckmann - X-Ray Inspection Service

    Analysis of components and errors using x-ray imaging technology.

    By Reckmann GmbH based in Hagen, GERMANY.

  • Casting Inspection Services

    The casting inspection requires solid professional skills. In addition to basic measurements and visual overviews, we carry out the liquid penetrant testing, magnetic particle testing and ultrasound inspections. If necessary, we also organise an x-ray inspection and classification for the cast components. All the chemical analysis and mechanical ...

    By LeinoCast Oy based in Salo, FINLAND.

  • Turnkey Services

    Our design engineers work in close cooperation with the clients right from the start. In the engineering phase we ensure that the designed component is both technically and economically possible to create, and the selected material is align with the costs and planned features. The flexible co-operation makes the whole delivery chain more efficient ...

    By LeinoCast Oy based in Salo, FINLAND.

  • Routine Services

    Our routine services involve the full inspection, disassembly, cleaning, NDT analysis, and repair of all turbine parts. We can perform removal of rotor blades, straightening and balancing of rotor shafts, and unstacking of built-up rotors. We can also handle the replacement of blades, valves, seals, vane segments, couplings, stems, studs, ...

    By Schmidt Industries, Inc. based in Bay City, MICHIGAN (USA).

  • Machining Services

    Machining is one of the value-add services that CFS foundry can supply after investment casting. When you are tired of sending investment casting blanks out for secondary machining operation, CFS foundry is your one-stop-shop for precision machining. We have in-house machining capabilities with excellent machining experience.

    By CFS Investment Casting based in Ningbo, CHINA.

  • Advanced Microscopy

    The Microscopy group includes staff and equipment to perform FESEM (Field Emission Scanning Electron Microscopy), which is used for surface structural and cross-sectional analysis. EDX (Energy Dispersive X-Ray Spectroscopy) is used to perform Elemental materials analysis, both qualitative and quantitative. FETEM (Field Emission Transmission ...

    By Evans Analytical GroupĀ® (EAG) based in Sunnyvale, CALIFORNIA (USA).

  • Materials Characterization Services

    Diamond Wafering Saw for precision sectioning. Automatic metallographic grinding and polishing set-up. Chemical and Electrochemical Etching. Optical Microscope with Image Analysis. Scanning Electron Microscope (SEM) with EDS. X-Ray Diffractometer (XRD). Beckman DCP Spectrometer. LECO Oxygen Analyser.

    By Surface Modification Systems, Inc based in Santa Fe Springs, CALIFORNIA (USA).

  • Chemical Analysis

    As standard practice within our company a Certificate of Analysis is supplied with all ordered materials. X-ray diffraction and spectrographic analyses are carried out for each element and compound. For non-metallic impurities, such as Oxygen, data is available upon request.

    By Testbourne Limited based in Hampshire, UNITED KINGDOM.

  • Ultrasonic Inspection Services

    The Ultrasonic inspection method employs sound waves to inspect parts and materials. This method is employed to characterize flaws such as cracks, delamination, porosity, voids, missed seams, adhesion, solder bonds and inclusions. In addition, material properties can be determined including elastic, density, sonic velocity, and heat treatment. ...

    By Constellation Technology Corporation based in Largo, FLORIDA (USA). from Non Destructive Testing Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you