Only show results in Virginia? Ok

Runoff software

  • Version HYSIM - Hydrological Catchment Model for Resource Assessment & Flow Naturalisation Software

    HYSIM is a hydrological simulation model (rainfall-runoff model) which uses rainfall and potential evaporation data to simulate the hydrological cycle (surface runoff, percolation to groundwater and river flow) on a continuous basis.

    By Water Resource Associates Ltd based in Wallingford, UNITED KINGDOM. from Hydrological Softwares Software line

  • Vflo - Physics-based Hydrologic Modeling

    Vflo is a gridded, physics-based hydrologic model that can simulate stormwater runoff based on geospatial data to model interior locations in the drainage network. It is used to simulate runoff from major river basins to small catchments. The same modeling framework is used to develop detailed drainage infrastructure design, or for realtime ...

    By Vieux, Inc. based in Norman, OKLAHOMA (USA).

  • PreVieux - Rainfall Prediction Software

    PreVieux is radar-based quantitative precipitation forecast for notifications, protective actions, sampling, operational control, and real-time forecasting of runoff or flooding.

    By Vieux, Inc. based in Norman, OKLAHOMA (USA).

  • Surface Hydrology

    Includes powerful tools to automate modeling processes. The software supports hydrologic modeling with HEC-1 (HEC-HMS), TR-20, TR-55, Rational Method, NFF, MODRAT, HSPF, HEC-RAS and CE QUAL W2. Simulates rainfall-runoff processes of catchment systems. It is applicable for a wide range of geographic areas and capable of solving a wide range of ...

    By NTEC Environmental Technology based in Claremont, AUSTRALIA.

  • Version HYSIM-CC - Hydrological Catchment Model for Resource Assessment & Flow Naturalisation Software

    Water Resource Associates produces a wide range of hydrological software. For example, HYSIM is a rainfall/runoff model which the Environment Agency has purchased for all of its regional offices. WRA have recently constructed a model linking rainfall/runoff has been linked to climate change scenarios, the first model of its kind in the world: HYSI

    By Water Resource Associates Ltd based in Wallingford, UNITED KINGDOM. from Hydrological Softwares Software line

  • ReFH

    This page describes the outputs from the research project (FD1913) 'Revitalisation of the FSR/FEH rainfall-runoff method' funded through the Joint Defra/Environment Agency Flood and Coastal Erosion Risk Management R&D Programme. The research was carried out by CEH during the period 2001-2005. One of the outputs is a supplementary report to the ...

    By Centre for Ecology & Hydrology based in Wallingford, Oxfordshire, UNITED KINGDOM.

  • PondPack - Detention Pond Analysis and Design Software

    From basic site designs to complex drainage studies, you can effectively model rainfall and runoff from urban and rural watersheds to design detention and retention facilities, outlet structures, and channels. The intuitive and easy-to-use interface simplifies detention pond design while the robust calculation engine handles the complexity of ...

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Haestad Software Software line

  • RAINPOL Web Platform

    RAINPOL is a web-based interface. It allows : to achieve specific treatment of hydrometeorological radar data. to view the data on a basemap. to be configured according to the needs of the client and the intended applications. It can be delivered with a rainfall-runoff model assimilating online measurements of precipitation and delivering in ...

    By NOVIMET based in Guyancourt, FRANCE.

  • StormCAD

    StormCAD provides comprehensive modeling for the design and analysis of storm sewer systems. StormCAD provides calculations for catchment runoff, gutters, inlets, junctions, pipe networks, and outfalls, and its intuitive interface makes the design and analysis of storm sewer systems easier than ever. Available for MicroStation, AutoCAD, or as a ...

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Geospatial Software line

  • HydroCAD - Software for Stormwater Modeling Systems

    HydroCAD Stormwater Modeling is a Computer Aided Design tool used by Civil Engineers for modeling stormwater runoff. HydroCAD is ideal for studies using the TR-20, TR-55, or SBUH methods. HydroCAD provides a wide range of standard H&H techniques in an easy-to-use graphical form, managed by the on-screen routing diagram we pioneered in 1986

    By HydroCAD Software Solutions LLC based in Chocorua, NEW HAMPSHIRE (USA).

  • H2OCalc

    H2OCalc is an easy-to-use, stand-alone program designed as a hydraulic and hydrology (H&H) toolbox to assist civil, environmental and water resources engineers with solving complex hydraulic problems quickly and accurately. Its powerful and comprehensive modeling capabilities let engineers streamline the hydraulic analysis and design of pipes, ...

    By Innovyze based in Broomfield, COLORADO (USA). from Specialty Products Software line

  • MapMakers - GIS Meteo Hydro Software

    GIS Meteo Hydro provides hydrological departments with the following opportunities: Observation of small, medium and large rivers conditions, observation of reservoirs conditions, systematization of hydrological observation data, control over snow coverage condition in forests and agricultural holdings, maintaining journals. Forecasting of water ...

    By MapMakers Group Ltd. based in Moscow, RUSSIA. from The GIS Meteo Application Suit Software line

  • Hfam - Version II - Dataprep Program Software

    The HFAM II Dataprep program (Dataprep) is custom software developed by Hydrocomp, Inc to assist in the preparation of real-time meteorological data for use with HFAM II. The Dataprep program is customized for use in a particular watershed during the initial setup of the required Dataprep database and watershed map. The meteorological data ...

    By Hydrocomp Inc. based in Menlo Park, CALIFORNIA (USA).

  • Premium

    SIMBA#water - Version 2.0 - Process Simulator for Modeling, Simulation, Optimization and Management of Wastewater Treatment Plants

    SIMBA#water is a process simulator for modeling, simulation, optimization, and management of wastewater treatment plants and beyond. It provides process simulation capabilities for sewers, wastewater treatment plants, and rivers.

    By inCTRL Solutions Inc. based in Oakville, ONTARIO (CANADA).

  • Civica - Version DataCurrent - Host and Analyze Flow Data

    DataCurrent provides an efficient and reliable way to collect, process and analyze municipal and environmental time-series data.

    By Civica Infrastructure Inc. based in Vaughan, ONTARIO (CANADA).

  • InfoWorks - Version CS - Hydrological Modeling Software

    InfoWorks CS provides water utilities with a uniquely effective tool with which to undertake hydrological modeling of the complete urban water cycle. Essential for identifying and justifying cost effective infrastructure improvements, InfoWorks CS also provides a practical method for operational control, including real time control, of your ...

    By Innovyze based in Broomfield, COLORADO (USA). from Wastewater Software line

  • CivilStorm - Comprehensive Stormwater Modeling and Analysis Software

    Stormwater systems can be very complex to model, with flow backups and reversals, surcharged pipes, and more. CivilStorm is one solution for all your stormwater modeling needs:

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Haestad Software Software line

  • InfoWorks ICM

    InfoWorks ICM (Integrated Catchment Modeling) is the first truly integrated modeling platform to incorporate both urban and river catchments. With full integration of 1D and 2D modeling techniques both the below ground and above ground elements of catchments can be modeled as never before. InfoWorks ICM enables the hydraulics and hydrology of ...

    By Innovyze based in Broomfield, COLORADO (USA). from Stormwater Software line

  • Version RC - Recession Curves Analysis Software

    Unique tool for recession curves analysis of springs and rivers. The program allows you to quickly separate individual recession curves from a hydrograph, and then analyze the individual recession curves or the master recession curve. To assemble the master recession curve, you can use a manual method or the new method based on a hybrid genetic ...

    By Hydro Office based in Dubnica nad Vahom, SLOVAKIA.

  • InfoWorks - Version ICM - Integrated Catchment Modeling Software

    InfoWorks ICM (Integrated Catchment Modeling) is the first truly integrated modeling platform to incorporate both urban and river catchments. With full integration of 1D and 2D modeling techniques both the below ground and above ground elements of catchments can be modeled as never before. InfoWorks ICM enables the hydraulics and hydrology of ...

    By Innovyze based in Broomfield, COLORADO (USA). from Wastewater Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you