Environmental industry Software available in Australasia

  • Showcase

    Version 4.2 - Visual Hydraulics Analysis Software

    Visual Hydraulics is a state of the art, flexible modeling tool.  It is used primarily for modeling the hydraulic characteristics of water and wastewater treatment plants, and is capable of analyzing entire hydraulic profiles. The software follows the traditional method for analyzing water surface profiles: a downstream control ...

    By Innovative Hydraulics based in Wexford, PENNSYLVANIA (USA).

  • Showcase

    PennPlanner - Web-Based Appointment Scheduling Software

    Save Time and Make Money. Imagine a trade show in which you knew who was going to stop by your booth, what time they would be there and what they wanted to discuss. With PennPlanner® that dream is reality. This purpose-built platform was designed with trade show exhibitors in mind. Create an event, set up time slots, customize your ...

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Showcase

    SoundPLAN - Acoustics Complete Package

    SoundPLAN Acoustics Complete (with or without aircraft noise propagation) includes all acoustics modules from data entry through to the final presentation. SoundPLAN Acoustics Complete not only enjoys a greatly reduced purchase price, but also a greatly reduced update and maintenance price after the first year free warranty. The software ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Packages Software line

  • Showcase

    Visual Water Designer - Wastewater Modeling Software

    Visual Water Designer is an all purpose water software tool providing users with many of the calculations encountered in water and wastewater design and analysis.  Visual Water Designer offers a hydraulic analysis section that focuses on hydraulics and pumping system analysis and a section that covers process calculations for almost ...

    By Innovative Hydraulics based in Wexford, PENNSYLVANIA (USA).

  • Showcase

    Greenhouse Gas Software

    Adapt to new regulations, and keep a history of calculation methodologies—and their results. With our software, you can roll up data to anyone who needs it. Streamline your work when you use the same source data for sustainability calculations, keep federal versus state requirements organized, and easily calculate what’s required for ...

    By Enviance, Inc. based in Carlsbad, CALIFORNIA (USA). from Environmental Software line

  • Showcase

    Sumo - Full Featured Wastewater Process Simulation Software

    SUMO19 full featured Wastewater Process Simulator. Modern design. There is no plant in the world that cannot be designed or simulated with Sumo19. Open source, fast and affordable. Best support in industry. Please download the technical information on this site and the software itself from dynamita.com/sumo19. The software will run in demo ...

    By Dynamita SARL based in Nyons, FRANCE.

  • Showcase

    AQMIS Cloud - Air Quality Management Information System

    The Air Quality Management Information System (AQMIS) is a proven state-of-the-science cloud solution for emissions management and air quality. Used by regulatory agencies, governments and facilities around the world, AQMIS allows you to manage emissions from thousands of sources, run models, issue permits, forecast air quality impacts and much ...

    By Lakes Environmental Software based in Waterloo, ONTARIO (CANADA). from Emissions Management Software line

  • Showcase

    iNoise Free - Noise Prediction for Industrial Noise and Wind Turbine | Software

    iNoise Free is the new intuitive and quality assured software for industrial noise calculations in the environment. The noise calculations are based on the ISO 9613 method and the recommendations of the new quality standard ISO 17534. The GUI is based on the Windows design rules for a genuine Windows user experience.

    By DGMR Software B.V. based in Den Haag, NETHERLANDS.

  • Showcase

    ARTM View - Atmospheric Radionuclide Transport Model

    ARTM ViewARTM View is a graphical user interface for the German Federal Office for Radiation (BfS) ARTM model. The ARTM model calculates the dispersion and deposition of released airborne radioactive materials in the atmosphere.

    By Lakes Environmental Software based in Waterloo, ONTARIO (CANADA). from Air Dispersion Modeling Software line

  • Showcase

    IMSXpress - Version ISO 14971 - Medical Device Risk Management and Hazard Analysis Software

    IMSXpress 14971 Medical Device Risk Management software is a Windows application for implementing Risk Analysis, Risk Evaluation, and Risk Control in strict compliance with the ISO 14971:2012 standard. Risk analysis, risk evaluation, and risk control methodologies strictly follow requirements of ISO 14971 and all recommendations included in ISO ...

    By AQA Company Inc. based in La Canada, CALIFORNIA (USA).

  • Showcase

    Custom Hydraulic and Computational Fluid Dynamics (CFD) Analysis Software

    In addition to our Visual Hydraulics and Visual Water Designer modeling software packages, Innovative Hydraulics also provides custom hydraulic model development and advanced Computational Fluid Dynamics (CFD) modeling.  We have created specialty models for a variety of clients and have used our CFD modeling capabilities to analyze various ...

    By Innovative Hydraulics based in Wexford, PENNSYLVANIA (USA).

  • Showcase

    SoundPLAN - Noise Mapping for Road / Railway / Distributed Computing Module

    The road and railway modules consist of 2 main parts; the emission calculation and the propagation calculation. The emission calculation is always performed inside the Geo-Database where the vehicle numbers for various vehicle categories, the speed of the vehicles, and the road/rail surfaces are fed into a calculation that results in the emission ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Modules Software line

  • Showcase

    SoundPLAN - European Noise Directive Package

    Noise Mapping at its best with the END Package. Noise mapping has become a standard procedure in the European Community and is based on directives from Brussels. Usually the directive for the noise mapping is referred to as END (European Noise Directive), but technically it is Directive 2002/49/EC.

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Packages Software line

  • Premium

    SoundPLAN - Industrial Noise Indoors and Outdoors Module

    Industrial Noise indoors and outdoors with Noise Transmission. The SoundPLAN industrial noise modeling is unique. All questions of frequency dependant noise can be simulated whether it is purely an indoor problem, a receiver outside that needs to be assessed for outside sources, or a complex problem with the source inside an industrial building ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Modules Software line

  • Premium

    NIRCal - Powerful NIR Method Development Tool

    NIRCal is a powerful chemometric software package to develop robust NIR methods which lead to fast and reliable NIR prediction results.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    SoundPLAN - Industry Noise Professional Kit Package

    The Industry Professional Package offers a compilation of modules enabling the engineer to work all problems for industrial noise with the highest efficiency. The highlight of this package is the unique collaboration between the indoor noise model and the transmission through the walls for the noise propagation simulation of the environmental ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Packages Software line

  • Premium

    SoundPLAN - Tools / Documentation / Interfaces Module

    In SoundPLAN special tools are found at every corner of the program supporting you in getting the best results out of noise modeling/planning software and to present your findings optimally. A lot of the tools are already included in the basic start-kits. The Documentation and the basic Spreadsheet are tools that go well beyond what many expect ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Modules Software line

  • Premium

    TProfessional - Manager Software

    For Controlling TProfessional Thermocycler in a Powerful Network. The TProfessional Manager Software allows to control up to 5 thermocycler of the TProfessional family* in a powerful network. PCR runs can be managed and monitored and versatile memory management functions allow easy synchronisation of the connected TProfessional Thermocyclers. ...

    By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

  • Premium

    SoundPLAN - Aircraft Noise Module

    As not every aircraft lands as whisper quiet as this one, SoundPLAN noise modeling is needed! In contrast to the standard aircraft noise models, SoundPLAN makes it possible to depict a comprehensive noise picture of the flight operations around airports. Aircraft taxi, start, and land, but there are also the ground operations of engine run-up, ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA). from Noise Modeling Software Modules Software line

  • Premium

    SoundPLAN - Noise Control and Noise Mapping Software

    Stay ahead of your competition with noise modeling software from the world market leader! Under the menu topics SoundPLAN Acoustics and SoundPLAN Air Pollution you can find detailed information about the two branches of hte SoundPLAN software. Our software comes in two flavors:SoundPLAN, the full industry strength software andSoundPLANessential, ...

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you