Only show results in Virginia? Ok

4-Gas Combustion Analyzer software

  • Premium

    LumaSoft - Version 7950 - Gas Multi Point Software

    The LumaSoft Gas Multi-Point 7950 software allows industrial manufacturers to easily monitor up to 5 different gases and remotely control up to 24 multi-gas monitors from a single computer.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Monitoring Software line

  • CMC SmartCEMS - Version SCCT - Configuration Tools Software

    The SmartCEMS Configuration Tools is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • CMC SmartCEMS - Version PEMS - Predictive Emissions Monitoring System Software

    The SmartCEMS PEMS Analyzer is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Version CFS - Configured Fireside Simulators

    CFS – Configured Fireside Simulators – are designed for use by engineers who are not experts in Computational Fluid Dynamics (CFD). CFS gives the real-world engineer the tools needed to optimize and analyze complex furnaces and boilers. CFS models are tailored to the customer’s furnace or boiler and accessed through an intuitive ...

    By Reaction Engineering International based in Salt Lake City, UTAH (USA).

  • ci-Tec - Version Inspect Pro Control C - Process-Control Optimization Software

    Process-control optimization with camera-based characteristic. inspect pro control C acquires and analyzes image data obtained from high performance infrared cameras in cement rotary-kiln systems. The so ware preprocesses image data and calculates characteristic parameters of the combustion behavior. On this basis, process control is adapted to ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • CMC SmartCEMS - Version SCAEM - Alternative Emission Monitor

    The SmartCEMS Alternative Emission Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Alternative Emission Monitor product ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • CMC SmartCEMS - Version SCCAM - Compliance Assurance Monitor

    The SmartCEMS Compliance Assurance Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Compliance Assurance Monitor product ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Emission Master Software

    Our calculation platforms help the user to rapidly model chemical processes using the latest US EPA equations and techniques. Software features calculations for: (1) US EPA Chapter 16 equations and calculation methodologies for batch and continuous processes. Available process operations include filling, purging, heating, vacuum,  ...

    By Mitchell Scientific, Inc. based in Westfield, NEW JERSEY (USA).

  • Showcase

    SoundPLAN - GRAL System - Mesoscale and Microscale Dispersion Modeling with GRAMM/GRAL

    The GRALsystem is a coupled Eulerian (GRAMM and GRAL wind fields) and Lagrangian model (GRAL dispersion). GRAL calculates optionally with its own prognostic or diagnostic wind field model. Depending on the influence of topography and land use, the GRAL calculation area can be approached by the wind with free flow, comparable with MISKAM, or ...

    By SoundPLAN International LLC based in Shelton, WASHINGTON (USA). from SoundPLAN Air Pollution Software line

  • CMC SmartCEMS - Version SCCPM - Continuous Parametric Monitor

    The SmartCEMS-Continuous Parametric Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas calculations for pollutants and diluents from various sources. The Continuous Parametric Monitor will meet the requirements of 40 CFR Part 60, Appendix B, PS-17. The Continuous Parametric Monitor is ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Premium

    IRAP-h View - Version 4.0 - Human Health Risk Assessment Program

    IRAP-h View is a user-friendly graphical interface for conducting a comprehensive multi-pathway human health risk assessment. It simultaneously calculates risk values for multiple chemicals, from multiple sources, at multiple exposure locations.

    By Lakes Environmental Software based in Waterloo, ONTARIO (CANADA). from Risk Assessment Software line

  • ci-Tec - Version Inspect Pro Control H - IR-Based Optimization of Temperature Distribution Software

    IR-based optimization of temperature distribution and combustion behavior. inspect pro control H acquires the image data from infrared cameras which can cover all the way into the feed of the rotary kiln, depending on the spectral range. inspect pro control H inspect pro control H then uses these characteristic values to optimize incineration ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • ci-Tec - Version Inspect Pro Control W - Waste Incineration Software

    Enhancing efficiency based on infrared and video data. inspect pro control W acquires and analyzes the signals from infrared camera systems monitoring the burner bed or, as an option, from video cameras tracking the burnout zone and flame fluctuation. The system preprocesses these data to calculate the characteristics needed to optimize the waste ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • MTT - Micro Turbine Lab Software

    MTT has developed a gasturbine lab environment which is based on its 3kW micro turbine. It can be used for educational purposes as well as for R&D and application studies. Due to its small scale, the MTT micro turbine lab is a cost effective solution for Universities and R&D institutes. The micro turbine lab is small size and has a low ...

    By Micro Turbine Technology BV (MTT) based in Eindhoven, NETHERLANDS.

  • CSR / Sustainability Reporting

    Reporting made easy with data management for SASB, DJSI, GRI, CDP and/or customer surveys WITHOUT customization and complex software. Limit data aggregation with verified ESG results. CSRware® is intuitive and keeps your information fresh and in one place. Access key information you care about across your organization on one software platform.

    By CSRware, Inc. based in San Francisco, CALIFORNIA (USA).

  • SAFER - Real-Time

    Effective management of hazardous material requires two distinct disciplines. First, safety professionals must take every precaution to prevent an airborne hazardous material event from taking place. Second, if an organization has the capacity to impact the safety of its employees and the surrounding community, it is imperative that that ...

    By SAFER Systems LLC based in Westlake Village, CALIFORNIA (USA). from SAFER Product Series Software line

  • BREEZE Risk Analyst - Advanced Human Health Risk Assessment Add-in for Esri ArcGIS

    BREEZE Risk Analyst is an add-in for Esri ArcGIS (sold separately, free version available) designed to perform human health risk assessment modeling. It is a highly flexible and expandable GIS-based analysis platform for conducting multi-pathway human health risk assessments. Risk Analyst seamlessly combines all the necessary tools, databases, GIS ...

  • BREEZE ExDAM - Explosion Damage & Injury Assessment Model

    BREEZE ExDAM® (Explosion Damage & Injury Assessment Model) is a unique, efficient 3D explosion consequence modeling suite that allows users to predict injury and damage resulting from the detonation of high explosive and vapor cloud explosions. BREEZE ExDAM contains the High Explosive Damage Assessment Model (HExDAM) and Vapor Cloud Explosion ...

  • BREEZE ExDAM - 3D Extend Module

    BREEZE ExDAM 8 HExDAM Module contains the High Explosive (HE) numerical model. It provides a fast and accurate means to predict over/dynamic pressure, impulse, and then damage/injury due to primary/secondary HEs with consideration of shielding effect. It is designed to replace the previous BREEZE HExDAM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you